• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Jigs / Shouldered / Standard Type

Bushings for Inspection Jigs / Shouldered / Standard Type

Click on this image to zoom in.

Click on this image to zoom in.

  • Bushings for Inspection Jigs / Shouldered / Standard Type
  • Bushings for Inspection Jigs / Shouldered / Standard Type

MISUMI

MISUMI

[Specifications]
・Outer Diameter Tolerance: Standard
・Hole Shape: Circular Shape
・Hole Selectable: Straight
・Material: Steel, Stainless Steel

[Features]
・Height is adjustable at shoulder as a shim (2, 3 and 5mm)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.


[ ! ] Use alteration LKC for changing L dimension tolerance.
Dimension P (H7) Tolerance Table
PH7
2.00 to 3.00

+0.010
0

3.01 to 6.00

+0.012
0

6.01 to 10.00

+0.015
0

10.01 to 18.00

+0.018
0

18.01 to 30.00

+0.021
0

30.01 to 32.00

+0.025
0

See JIS B 0401-2 (1998)
[M] Material[H] Hardness[S] Surface TreatmentType
T SelectionT, H Configurable
P+0.03
+0.01		P
H7		P+0.03
+0.01		P
H7
JIS−SKS93 Equivalent50 to 60HRC—KJBSTKJBHSTKJBFSKJBFHS
JIS−SKS93 Equivalent50 to 60HRCElectroless Nickel PlatingKJBSTMKJBHSTMKJBFSMKJBFHSM
EN 1.4301 Equiv.——KJBSTSKJBHSTS——
EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRC—KJBSTSCKJBHSTSCKJBFSSCKJBFHSSC

Specification Table

Part Number—P—L—T—H
 
Type D
KJBST
KJBFS		10
10		—
—		P3.97
P7.00		—
—		L6
L15		—
—		T2
T5.0
—
H15
■T dimension selectable, P dimension tolerance +0.03 to +0.01
Part NumberP
+0.03 to +0.01		LT±0.05HR
TypeD0.01 mm Increments1 mm IncrementsSelection
(JIS−SKS93 Hardened)
KJBST

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBSTM

(EN 1.4301 Equiv.)
KJBSTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBSTSC		8 2.00 to 6.005 to 40

When P < 4:
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2 3 5

T ≤ L−2		D+41.0
10 2.00 to 8.001.0
12 4.00 to 10.002.0
16 8.00 to 14.002.0
2010.00 to 18.002.0
2515.00 to 23.002.0
3020.00 to 27.002.0
3525.00 to 32.002.0
[ ! ]When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5.
[ ! ]When selecting material EN 1.4301 Equiv., there must be a 2 mm or greater wall thickness [(D - P)/2 ≥ 2]
[ ! ]D = 30 and 35 are applicable to JIS−SKS93 (except electroless nickel plating) only.
■T dimension selection, P dimension tolerance H7
Part NumberP
H7		LT±0.05HR
TypeD0.01 mm Increments1 mm IncrementsSelection
(JIS−SKS93 Hardened)
KJBHST

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBHSTM

(EN 1.4301 Equiv.)
KJBHSTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBHSTSC		8 2.00 to 6.005 to 40

When P < 4:
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2 3 5

T ≤ L−2		D+41.0
10 2.00 to 8.001.0
12 4.00 to 10.002.0
16 8.00 to 14.002.0
2010.00 to 18.002.0
2515.00 to 23.002.0
3020.00 to 27.002.0
3525.00 to 32.002.0
[ ! ]When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5.
[ ! ]When selecting material EN 1.4301 Equiv., there must be a 2 mm or greater wall thickness [(D - P)/2 ≥ 2]
[ ! ]D = 30 and 35 are applicable to JIS−SKS93 (except electroless nickel plating) only.
■T dimension and H dimension configurable, P dimension tolerance +0.03 to +0.01
Part NumberP
+0.03 to +0.01		LT±0.01HR
TypeD0.01 mm Increments1 mm Increments0.1 mm Increments1 mm Increments
(JIS−SKS93 Hardened)
KJBFS

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBFSM

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBFSSC		8 2.00 to 6.005 to 40

When P < 4
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2.0 to 5.5

T ≤ L−2		10 to 161.0
10 2.00 to 8.0012 to 181.0
12 4.00 to 10.0014 to 202.0
16 8.00 to 14.0018 to 262.0
2010.00 to 18.0022 to 372.0
2515.00 to 23.0027 to 402.0
[ ! ]When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5.
■T dimension and H dimension configurable, P dimension tolerance H7
Part NumberP
H7		LT±0.01HR
TypeD0.01 mm Increments1 mm Increments0.1 mm Increments1 mm Increments
(JIS−SKS93 Hardened)
KJBFHS

(SKC93 Hardened, Electroless Nickel Plating)
KJBFHSM

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBFHSSC		8 2.00 to 6.005 to 40

When P < 4
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2.0 to 5.5

T ≤ L−2		10 to 161.0
10 2.00 to 8.0012 to 181.0
12 4.00 to 10.0014 to 202.0
16 8.00 to 14.0018 to 262.0
2010.00 to 18.0022 to 372.0
2515.00 to 23.0027 to 402.0
[ ! ]When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5.

Alterations

Part Number—P—L—T (FC·NC ... etc.)
KJBST10
KJBHST12		—
—		P3.00
P8.00		—
—		L6
L20		—
—		T2
T3		—
—		STC
CRN
AlterationsCodeSpec.
Groove
(for Adhesive Reservoir)
FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only
when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 15
[NG] Combination with alteration NC is not available
Groove (for Retaining)
NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only
when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 15
[NG] Combination with alteration FC is not available
Radius R C Chamfered
RNAdds C Chamfering (0.5 or less) to R.
Radius R Square Corner
CRNReplaces R with square corner.
[ ! ] Edge may be burred.
[NG] Combination with alteration LKC is not available
AlterationsCodeSpec.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93
(except electroless nickel plating). 　

Shoulder Thickness Tolerance
TKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered T Dimension Fixed Type only.
[NG] Combination with alteration CRN and LKC is not available
L Dimension Tolerance
LKCChanges L dimension tolerance to 0 -0.05.
[NG] Combination with TKC and CRN is not available
Flats Machining
HTAdds a flat on bushing.
[ ! ] No flat on shoulder part.

[ ! ]Applicable to P, L Dimension Configurable Type only.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJBFHS8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFHS10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFHS12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFHS16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFHS20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFHS25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFHSM8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFHSM10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFHSM12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFHSM16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFHSM20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFHSM25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFHSSC8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFHSSC10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFHSSC12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFHSSC16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFHSSC20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFHSSC25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFS8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFS10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFS12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFS16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFS20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFS25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFSM8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFSM10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFSM12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFSM16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFSM20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFSM25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFSSC8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBFSSC10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBFSSC12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFSSC16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFSSC20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFSSC25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBHST8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST10-P[2-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST12-P[4-10/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST16-P[8-14/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST20-P[10-18/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST25-P[15-23/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST30-P[20-27/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHST35-P[25-32/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM10-P[2-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM12-P[4-10/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM16-P[8-14/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM20-P[10-18/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTM25-P[15-23/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS10-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS12-P[4-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS16-P[8-12/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS20-P[10-16/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTS25-P[15-21/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTSC8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTSC10-P[2-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTSC12-P[4-10/0.01]-L[5-40/1]-T[2,​3,​5]
KJBHSTSC16-P[8-14/0.01]-L[5-40/1]-T[2,​3,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Hardness Material Hardness Details Type I.D. Tolerance Bushing Dia. D
(Ø) 		Shoulder Dia. H
(Ø) 		H
(mm) 		L
(mm) 		P
(mm) 		T
(mm)

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH78-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH710-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH712-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH716-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH720-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH725-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH78-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH710-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH712-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH716-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH720-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard TypeH725-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH78-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH710-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH712-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH716-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH720-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard TypeH725-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.018-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0110-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0112-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0116-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0120-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0125-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.018-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0110-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0112-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0116-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0120-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Standard Type+0.03/+0.0125-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.018-10 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.0110-12 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.0112-14 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.0116-18 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.0120-22 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Standard Type+0.03/+0.0125-27 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH7812-5 ～ 402 ～ 62 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71014-5 ～ 402 ～ 82 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71216-5 ～ 404 ～ 102 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71620-5 ～ 408 ～ 142 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH72024-5 ～ 4010 ～ 182 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH72529-5 ～ 4015 ～ 232 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH73034-5 ～ 4020 ～ 272 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH73539-5 ～ 4025 ～ 322 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH7812-5 ～ 402 ～ 62 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71014-5 ～ 402 ～ 82 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71216-5 ～ 404 ～ 102 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH71620-5 ～ 408 ～ 142 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH72024-5 ～ 4010 ～ 182 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Standard TypeH72529-5 ～ 4015 ～ 232 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH7812-5 ～ 402 ～ 62 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH71014-5 ～ 402 ～ 62 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH71216-5 ～ 404 ～ 82 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH71620-5 ～ 408 ～ 122 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH72024-5 ～ 4010 ～ 162 ～ 5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T Selectable Standard TypeH72529-5 ～ 4015 ～ 212 ～ 5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT Selectable Standard TypeH7812-5 ～ 402 ～ 62 ～ 5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT Selectable Standard TypeH71014-5 ～ 402 ～ 82 ～ 5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT Selectable Standard TypeH71216-5 ～ 404 ～ 102 ～ 5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT Selectable Standard TypeH71620-5 ～ 408 ～ 142 ～ 5

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Basic Shape Shouldered Hole Selectable Straight Hole Shape Circular Shape
With or w/o Tap Not Tapped Outer Diameter Tolerance Standard

Configure

Clear all

88Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Surface Treatment

    • Not Provided
    • Electroless Nickel Plating

    Clear

  • Hardness

    • Provided
    • Not Provided

    Clear

  • Material

    • EN 1.4037 Equiv.
    • EN 1.4301 Equiv.
    • JIS-SKS93

    Clear

  • Hardness Details

    • 45~50HRC
    • 50~60HRC

    Clear

  • Type

    • T Selectable Standard Type
    • T, H Configurable Standard Type

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25
    • 30
    • 35

    Clear

  • Shoulder Dia. H(Ø)

    • 12
    • 14
    • 16
    • 20
    • 24
    • 29
    • 34
    • 39

    Clear

  • H(mm)

     [10-40/1mm Unit(s)]

    Clear

  • L(mm)

     [5-40/1mm Unit(s)]

    Clear

  • P(mm)

     [2-32/0.01mm Unit(s)]

    Clear

  • T(mm)

    • 2
    • 3
    • 5

     [2-5.5/0.1mm Unit(s)]

    Clear

  • Type

    • KJBFHS
    • KJBFHSM
    • KJBFHSSC
    • KJBFS
    • KJBFSM
    • KJBFSSC
    • KJBHST
    • KJBHSTM
    • KJBHSTS
    • KJBHSTSC
    • KJBST
    • KJBSTM
    • KJBSTS
    • KJBSTSC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 8 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.