• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Jigs / Shouldered / Press Fit Type

Bushings for Inspection Jigs / Shouldered / Press Fit Type

Click on this image to zoom in.

Click on this image to zoom in.

  • Bushings for Inspection Jigs / Shouldered / Press Fit Type
  • Bushings for Inspection Jigs / Shouldered / Press Fit Type

MISUMI

MISUMI

[Specifications]
・Outer Diameter Tolerance: Press Fit
・Hole Shape: Circular Shape
・Hole Selectable: Straight
・Material: Steel, Stainless Steel

[Features]
・Height is adjustable at shoulder as a shim (2, 3 and 5mm)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[ ! ]1


[ ! ] 1. When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5.

[!] For hole machining, please note that inner diameter shrinkage of press fit type is relatively large.

PH7
2.00 to 3.00

+0.010
0

3.01 to 6.00

+0.012
0

6.01 to 10.00

+0.015
0

10.01 to 18.00

+0.018
0

18.01 to 30.00

+0.021
0

30.01 to 32.00

+0.025
0

Dp6
8+0.024
+0.015
10
12+0.029
+0.018
16
20+0.035
+0.022
25
[M] Material[H] Hardness[S] Surface TreatmentType
T SelectionT, H Configurable
P+0.03
+0.01		P
H7		P+0.03
+0.01		P
H7
JIS−SKS93 Equivalent50 to 60HRC—KJBPSTKJBPHSTKJBPFSKJBPFHS
JIS−SKS93 Equivalent50 to 60HRCElectroless Nickel PlatingKJBPSTMKJBPHSTMKJBPFSMKJBPFHSM
EN 1.4301 Equiv.[!]2——KJBPSTSKJBPHSTSKJBPFSSKJBPFHSS
EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRC—KJBPSTSCKJBPHSTSCKJBPFSSCKJBPFHSSC

Specification Table

Part Number—P—L—T—H
 
Type D
KJBST
KJBFS		10
10		—
—		P3.97
P7.00		—
—		L6
L15		—
—		T2
T5.0
—
H15
■T dimension selectable, P dimension tolerance+0.03
+0.01
Part NumberPLT±0.05HR
TypeD0.01 mm Increments1 mm IncrementsSelection
(JIS−SKS93 Hardened)
KJBPST

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBPSTM

(EN 1.4301 Equiv.)
KJBPSTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBPSTSC		8 2.00 to 6.005 to 40

When P < 4:
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2 3 5

T ≤ L−2		D+41.0
10 2.00 to 8.001.0
12 4.00 to 10.002.0
16 8.00 to 14.002.0
2010.00 to 18.002.0
2515.00 to 23.002.0
3020.00 to 27.002.0
3525.00 to 32.002.0
■T dimension selection, P dimension tolerance H7
Part NumberPLT±0.05HR
TypeD0.01 mm Increments1 mm IncrementsSelection
(JIS−SKS93 Hardened)
KJBPHST

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBPHSTM

(EN 1.4301 Equiv.)
KJBPHSTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBPHSTSC		8 2.00 to 6.005 to 40

When P < 4
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2 3 5

T ≤ L−2		D+41.0
10 2.00 to 8.001.0
12 4.00 to 10.002.0
16 8.00 to 14.002.0
2010.00 to 18.002.0
2515.00 to 23.002.0
3020.00 to 27.002.0
3525.00 to 32.002.0
■T dimension and H dimension configurable, P dimension tolerance +0.03
+0.01
Part NumberPLT±0.01HR
TypeD0.01 mm Increments1 mm Increments0.1 mm Increments1 mm Increments
(JIS−SKS93 Hardened)
KJBPFS

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBPFSM

(EN 1.4301 Equiv.)
KJBPFSS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBPFSSC		8 2.00 to 6.005 to 40

When P < 4
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2.0 to 5.5

T ≤ L−2		10 to 161.0
10 2.00 to 8.0012 to 181.0
12 4.00 to 10.0014 to 202.0
16 8.00 to 14.0018 to 262.0
2010.00 to 18.0022 to 372.0
2515.00 to 23.0027 to 402.0
■T dimension and H dimension configurable, P dimension tolerance H7
Part NumberPLT±0.01HR
TypeD0.01 mm Increments1 mm Increments0.1 mm Increments1 mm Increments
(JIS−SKS93 Hardened)
KJBPFHS

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBPFHSM

(EN 1.4301 Equiv.)
KJBPFHSS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJBPFHSSC		8 2.00 to 6.005 to 40

When P < 4
L ≤ P × 4
When P ≥ 4:
L ≤ P × 3		2.0 to 5.5

T ≤ L−2		10 to 161.0
10 2.00 to 8.0012 to 181.0
12 4.00 to 10.0014 to 202.0
16 8.00 to 14.0018 to 262.0
2010.00 to 18.0022 to 372.0
2515.00 to 23.0027 to 402.0
[ ! ] 2. For EN 1.4301 Equiv., there must be a 2 mm or greater wall thickness [(D - P)/2 ≥ 2]

Alterations

Part Number—P—L—T (FC·NC ... etc.)
KJBST10
KJBHST12		—
—		P3.00
P8.00		—
—		L6
L20		—
—		T2
T3		—
—		STC
CRN
[ ! ] Applicable to P, L Dimension Configurable Type only
AlterationsCodeSpec.
Groove (for Adhesive Reservoir)
FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 15
[NG] Combination with alteration NC is not available
Groove (for Retaining)
NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 15
[NG] Combination with alteration FC is not available
Radius R C Chamfered
RNAdds C Chamfering (0.5 or less) to R.
Radius R Square Corner
CRNReplaces R with square corner.
[ ! ] Edge may be burred.
[NG] Combination with TKC and LKC is not available
AlterationsCodeSpec.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating).
　

Shoulder Thickness Tolerance
TKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered T Dimension Fixed Type only.
[NG] Combination with alteration CRN and LKC is not available
L Dimension Tolerance
LKCChanges L dimension tolerance to 0 -0.05.
[NG] Combination with TKC and CRN is not available
Flats Machining
HTAdds a flat on bushing.
[ ! ] No flat on shoulder part.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJBPFHS8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFHS10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFHS12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFHS16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFHS20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFHS25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFHSM8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFHSM10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFHSM12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFHSM16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFHSM20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFHSM25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFHSS8-P[2-4/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFHSS10-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFHSS12-P[4-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFHSS16-P[8-12/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFHSS20-P[10-16/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFHSS25-P[15-21/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFHSSC8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFHSSC10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFHSSC12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFHSSC16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFHSSC20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFHSSC25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFS8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFS10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFS12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFS16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFS20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFS25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFSM8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFSM10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFSM12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFSM16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFSM20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFSM25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFSS8-P[2-4/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFSS10-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFSS12-P[4-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFSS16-P[8-12/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFSS20-P[10-16/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFSS25-P[15-21/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPFSSC8-P[2-6/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[10-16/1]
KJBPFSSC10-P[2-8/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[12-18/1]
KJBPFSSC12-P[4-10/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[14-20/1]
KJBPFSSC16-P[8-14/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[18-26/1]
KJBPFSSC20-P[10-18/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[22-37/1]
KJBPFSSC25-P[15-23/0.01]-L[5-40/1]-T[2-5.5/0.1]-H[27-40/1]
KJBPHST8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST10-P[2-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST12-P[4-10/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST16-P[8-14/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST20-P[10-18/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST25-P[15-23/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST30-P[20-27/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHST35-P[25-32/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHSTM8-P[2-6/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHSTM10-P[2-8/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHSTM12-P[4-10/0.01]-L[5-40/1]-T[2,​3,​5]
KJBPHSTM16-P[8-14/0.01]-L[5-40/1]-T[2,​3,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Hardness Material Hardness Details Type I.D. Tolerance Bushing Dia. D
(Ø) 		Shoulder Dia. H
(Ø) 		L
(mm) 		P
(mm) 		T
(mm)

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH7810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH72022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH72527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH7810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH71618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH72022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit TypeH72527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH7810 ～ 165 ～ 402 ～ 42 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH71012 ～ 185 ～ 402 ～ 62 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH71214 ～ 205 ～ 404 ～ 82 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH71618 ～ 265 ～ 408 ～ 122 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH72022 ～ 375 ～ 4010 ～ 162 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit TypeH72527 ～ 405 ～ 4015 ～ 212 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH7810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH71012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH71214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH71618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH72022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit TypeH72527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.01810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.012022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.012527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.01810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.011618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.012022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT, H Configurable Press Fit Type+0.03/+0.012527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.01810 ～ 165 ～ 402 ～ 42 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.011012 ～ 185 ～ 402 ～ 62 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.011214 ～ 205 ～ 404 ～ 82 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.011618 ～ 265 ～ 408 ～ 122 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.012022 ～ 375 ～ 4010 ～ 162 ～ 5.5

-

1 9 Days 10Stainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-T, H Configurable Press Fit Type+0.03/+0.012527 ～ 405 ～ 4015 ～ 212 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.01810 ～ 165 ～ 402 ～ 62 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.011012 ～ 185 ～ 402 ～ 82 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.011214 ～ 205 ～ 404 ～ 102 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.011618 ～ 265 ～ 408 ～ 142 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.012022 ～ 375 ～ 4010 ～ 182 ～ 5.5

-

1 8 Days 10Stainless SteelNot ProvidedProvidedEN 1.4037 Equiv.45~50HRCT, H Configurable Press Fit Type+0.03/+0.012527 ～ 405 ～ 4015 ～ 232 ～ 5.5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH78125 ～ 402 ～ 62 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH710145 ～ 402 ～ 82 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH712165 ～ 404 ～ 102 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH716205 ～ 408 ～ 142 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH720245 ～ 4010 ～ 182 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH725295 ～ 4015 ～ 232 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH730345 ～ 4020 ～ 272 ～ 5

-

1 8 Days 10SteelNot ProvidedProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH735395 ～ 4025 ～ 322 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH78125 ～ 402 ～ 62 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH710145 ～ 402 ～ 82 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH712165 ～ 404 ～ 102 ～ 5

-

1 8 Days 10SteelElectroless Nickel PlatingProvidedJIS-SKS9350~60HRCT Selectable Press Fit TypeH716205 ～ 408 ～ 142 ～ 5

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Basic Shape Shouldered Hole Selectable Straight Hole Shape Circular Shape
With or w/o Tap Not Tapped Outer Diameter Tolerance Press Fit

Configure

Clear all

100Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Surface Treatment

    • Not Provided
    • Electroless Nickel Plating

    Clear

  • Hardness

    • Provided
    • Not Provided

    Clear

  • Material

    • EN 1.4037 Equiv.
    • EN 1.4301 Equiv.
    • JIS-SKS93

    Clear

  • Hardness Details

    • 45~50HRC
    • 50~60HRC

    Clear

  • Type

    • T Selectable Press Fit Type
    • T, H Configurable Press Fit Type

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25
    • 30
    • 35

    Clear

  • Shoulder Dia. H(Ø)

    • 12
    • 14
    • 16
    • 20
    • 24
    • 29
    • 34
    • 39

     [10-40/1Ø Unit(s)]

    Clear

  • L(mm)

     [5-40/1mm Unit(s)]

    Clear

  • P(mm)

     [2-32/0.01mm Unit(s)]

    Clear

  • T(mm)

    • 2
    • 3
    • 5

     [2-5.5/0.1mm Unit(s)]

    Clear

  • Type

    • KJBPFHS
    • KJBPFHSM
    • KJBPFHSS
    • KJBPFHSSC
    • KJBPFS
    • KJBPFSM
    • KJBPFSS
    • KJBPFSSC
    • KJBPHST
    • KJBPHSTM
    • KJBPHSTS
    • KJBPHSTSC
    • KJBPST
    • KJBPSTM
    • KJBPSTS
    • KJBPSTSC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 8 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.