8 Series / Aluminum Extrusions with Built-in Joints / Single Joint
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
JFSS8－4040 L
(Left End Face Single Joint Pre-Inserted Type)
JFSS8－4040W
(Double End Face Single Joints Pre-Inserted Type)
[ ! ] Joint components will be shipped loosely tightened.
| Part Name | [M] Material | [S] Surface Treatment | |
| Aluminum Extrusion | EN AW−6061−T5 Equiv. | Anodize | |
| Single Joints Kit | Joint Plate | EN 1.4301 Equiv. | — |
| Joint Nut | EN 1.4401 Equiv. | ||
| Hex Socket Button Head Cap Screw | EN 1.4567 Equiv. | ||
Specification Table
| Part Number | — | L |
| JFSS8−4040 L | — | 1200 |
| Part Number | Joint Component | L 0.5 mm Increments | Extrusion | Built-in Joint Component | A | Wrench required when tightening. | ||
| Single Joints | Quantity | |||||||
| JFSS | 8−4040 | L (Left End Face only) | 100 to 4000 | HFS8−4040 | HSJNS8 | 1 | 40 | For M8 |
| W (Double End Faces) | 2 | |||||||
Alterations
[ ! ] Alterations only on this page are available.
| Alterations | Code | Spec. | ||
| Extrusion | Tap | Depth | ||
| Right End Face Tapping [ ! ] JFS□□－□□□□L | RTP Right End Face  | 8−4040 | M12 | 36 |
| Alterations | Code | Spec. | ||
| Extrusion | H | Hole Dia. | ||
| Right End Face Wrench Hole [ ! ] JFSC□－□□□□L | RCH RCV  | 8−4040 | 20 | 8 |
Type
| Pre-Inserted Aluminum Extrusions Single Joint Type | Single Joint Kits | |
|---|---|---|
| ■Single Joint Kits  | ■Single Joint Kits  |
| Aluminum extrusions with a narrow type single joint kit installed. Wrench holes are necessary on the mating extrusion. | Use it when edges of two extrusions are connected perpendicularly, after a hole is drilled in each extrusion. D hole and wrench hole machining required. | Shape of Narrow Type has altered so that its joint section does not collide with the panel when the panel is inserted into the extrusion slot. D hole and wrench hole machining required. |
| JFSS | HSJ/HSJS | HSJNS |
- Aluminum extrusions HFS8-4040 are used.
- When using other aluminum extrusions, please purchase the extrusion and simple joint separately.
Connecting method
[ ! ] Wrench holes are necessary on the mating extrusion.
Technical Information
■How to Make the Extrusion End Cap Flat
The length of the aluminum extrusion is shortened to compensate for the thickness of the extrusion end cap.
* Alterations (FR/FL) for "thickness 2.5 mm" are currently not available.
C: Protrudes by the thickness of the extrusion end cap
Specify the part number HFS6-3030-300-RCV-LCV, a length of 300 mm, and the wrench holes on the left and right.
C: Protrudes of the extrusion
end cap
D: The extrusion end cap
does not protrude
and becomes flat
D: The extrusion end cap does not protrude and becomes flat
Specify the part number HFS6-3030-294-RCV-LCV-FR-FL , the extrusion to be shorter by the thickness of the extrusion end cap, and the wrench hole and wrench hole movement to the left and right.
Product Comparison Information
Blind Joint Connection is recommended where standard brackets and peripherals interfere. See the table below and check the details on each product page.
■8 Series Blind Joints
| Product Name | Single Joints | Tapping Joints | Screw Joints | Center Joints | Post-Assembly Insertion Double Joints | Pre-Assembly Double Joints | Parallel Joints |
|---|---|---|---|---|---|---|---|
| Product Photo |
|
|
|
|
|
|
|
| Installation Diagram |
|
|
|
|
|
|
|
| Material | Steel or EN 1.4301 Equiv. | JIS−SWCH18A | Steel or EN 1.4301 Equiv. | EN 1.4308 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. | EN 1.4401 Equiv. / EN 1.4301 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. |
| Features | D holes added on the extrusions do not penetrate to the flat surface. Blind Joints with very good appearance. | Tapping alteration is not required. Most economical Blind Joints. | Joint Plate enables secure and economical connection. | Most standard Blind Joints usable with various types of aluminum extrusions. | Connects securely at two locations. Tightest connection can be achieved of all Blind Joints. | Can be used for various applications such as those of extending extrusions and mounting to plates. | Extrusions can be connected in parallel. |
| Alterations required | Wrench Hole / D Hole | Wrench Hole | Tapping / Wrench Hole | M Hole | M Hole | S Hole | L Hole |
| Aluminum Extrusions with Built-in Joints | Viewing | - | Aluminum Extrusions with Built-in Screw Joints | Aluminum Extrusions with Built-in Center Joints | - | Aluminum Extrusions with Built-in Pre-Assembly Insertion Double Joints | - |
Part Number
|
|---|
| JFSS8-4040L-[100-4000/0.5] |
| JFSS8-4040W-[100-4000/0.5] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Joint Components Built-in | L (mm) | |
|---|---|---|---|---|---|---|
| 1 | 6 Days | 10 | L (Left End Face only) | 100 ～ 4000 | ||
| 1 | 6 Days | 10 | W (Double End Faces) | 100 ～ 4000 |
Loading...
App. Example
Basic information
| Series Name | Brackets for 8 Series (Extrusion Slot Width 10mm) | Material | EN AC-51400-T5 Equiv. | Extrusion Series | HFS |
|---|---|---|---|---|---|
| Extrusion No. | 8-4040 | Type | Single Joint Type |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.