• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Lead Screws / Multi-Pitch / Both Ends Stepped DIN103

Lead Screws / Multi-Pitch / Both Ends Stepped DIN103

MISUMI

MISUMI

[Features] One of the most commonly used 30-degree trapezoidal screw jacks with double stage.

(i)Remark

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

Right-Hand Screw / Left-Hand Screw / Fine Pitch Right-Hand Screw
Right-Hand Screw with Keyway
h7 Tolerance (V,Q)
Overor LessTolerance
360
－0.012
6100
－0.015
10180
－0.018
18300
－0.021
30500
－0.025
Compliant with JIS B 0401		Unspecified Dimensional Tolerances
Overor LessTolerance
0.53±0.1
36±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
10002000±1.2
Compliant with JIS B 0405 Class m (Middle Class)
[ ! ] Keyway machining details conform to "Shaft Keyway" Dimensions shown on the keyway table.
Type[M] Material[S] Surface Treatment
Right-Hand ScrewRight-Hand Screw with KeywayFine Pitch Right-Hand ScrewLeft-Hand Screw
MTSRWMTSRVMTXRWMTSLWEN 1.1191 Equiv.—
MTSBRWMTSBRVMTXBRWMTSBLWBlack Oxide
RMTSRWRMTSRV—RMTSLWLow Temperature Black Chrome Plating
MTSTRW——MTSTLWEN 1.4305 Equiv.—
·No hardening treatment is applied.		Lead Screw Accuracy
ItemContent
Standard ChevronTr Standard (Old TM Standard)
Tolerance and Allowable DimensionJIS B 0217-1,2
Screw Accuracy (Threaded)7e
Nut Accuracy (Tapped)7H
Single Pitch Error±0.02
Accumulated Pitch Error±0.15/300 mm
The Tr standard has the same standard dimensions as the old JIS TM standard (abolished).
Dimensional tolerances are regulated for Tr standard.
Refer to the table below for Lead Screw Specifications.		Standard Chevron Dimensions

H = 1.866P, H1 = 0.5P, d2 = d - 0.5P
d1 = d-P, D = d, D2 = d2, D1 = d1
Thread d: O.D. d1: Root Dia. d2: Effective Dia.
Tapped D: Root Dia. D1: I.D. D2: Effective Dia.
P: Pitch H1: Engage Height

Specification Table

Right-Hand Screw / Left-Hand Screw
Part Number　1 mm IncrementsV / Q SelectionDPitch
P
TypeDLF·S
Right-Hand Screw
MTSRW
MTSBRW
RMTSRW　(D ≤ 32)
MTSTRW (Stainless Steel)
Left-Hand Screw
MTSLW
MTSBLW
RMTSLW　(D ≤ 32)
MTSTLW (Stainless Steel)		* 850 to 500The selectable length varies depending on the shaft diameter.

When V, Q ≤ 9,
2 ≤ F ≤ V × 5
2 ≤ S ≤ Q × 5

When V, Q ≥ 10,
2 ≤ F ≤ V × 7
2 ≤ S ≤ Q × 7		6     81.5
1080 to 100067    102
126789  122
148910   143
16100 to 120091012   16(3)
18150 to 120091012   184
2010121415  204
2210121415  225
251214151617 25(5)
281415161720 285
32200 to 1200141516172025326
36172025   366
40202530   40(6)
([ ! ] *D8 is applicable to MTSRW, MTSBRW and RMTSRW only)5025303540  508
[!] When combined with position indicators, the standard Q dimensions are 8 to 20.
[!] D dimension 22, 36, 40 and 50 are not applicable to Stainless Steel. D dimension 25, 28 and 32 are applicable to Right-Hand Thread only.
[ ! ] This product is a single thread screw and therefore the pitch P = lead.
[ ! ] Sizes in ( ) are outside the Tr standard, but the machining accuracy of all sizes conforms to the Tr standard.
Right-Hand Screw with Keyway
Part Number1 mm IncrementsV / Q Selection1 mm IncrementsDPitch
P
TypeDLF·SCJ
MTSRV
MTSBRV
RMTSRV (D ≤ 32)		1280 to 1000The selectable length varies depending on the shaft diameter.

When V, Q ≤ 9,
2 ≤ F ≤ V × 5
2 ≤ S ≤ Q × 5

When V, Q ≥ 10,
2 ≤ F ≤ V × 7
2 ≤ S ≤ Q × 7		789   C ≤ 60
S−C−J ≥ 2

J ≥ 2
or J = 0

[ ! ] When J = 0, keyway R will be eliminated on the shaft end side.
　		122
148910   143
16100 to 120091012   16(3)
18150 to 120091012   184
2010121415  204
2210121415  225
251214151617 25(5)
281415161720 285
32200 to 1200141516172025326
36172025   366
40202530   40(6)
5025303540  508
[!] When combined with position indicators, the standard Q dimensions are 8 to 20.
[ ! ] This product is a single thread screw and therefore the pitch P = lead.
[ ! ] Sizes in ( ) are outside the Tr standard, but the machining accuracy of all sizes conforms to the Tr standard.
Fine Pitch Right-Hand Screw [ ! ] The Fine Pitch Right-Hand Screw has a smaller pitch than the conventional standard products.
Part Number1 mm IncrementsV / Q SelectionDPitch
P
TypeDLF·S
MTXRW
MTXBRW		16100 to 1000The selectable length varies depending on the shaft diameter.

When V, Q ≤ 9,
2 ≤ F ≤ V × 5
2 ≤ S ≤ Q × 5

When V, Q ≥ 10,
2 ≤ F ≤ V × 7
2 ≤ S ≤ Q × 7		9 10 12162
20150 to 100010 12 14 15202
[ ! ] This product is a single thread screw and therefore the pitch P = lead.
[ ! ] The machining accuracy of all sizes conforms to the Tr standard.

[!] Recommended Grease: Lithium soap-based grease No. 2 (Please wipe off the antirust oil before applying.)
Lead Screw Specifications Unit: mm
Shaft Dia.PitchThread Shaft
Effective Dia.		Screw Shaft
Minor Dia.
(MIN)		Thread Shaft
Lead Angle		Screw Shaft Runout (Max.)
Shaft Overall Length
Up to 125126
Up to 200		201
Up to 315		316
Up to 400		401
Up to 500		501
Up to 630		631
Up to 800		801
Up to 1000		1001
Up to 1250		1251
Up to 1600		1601
Up to 2000
81.57.25(5.9)3° 46′0.10.140.210.270.35------
1029(7.2)4° 03′0.090.120.160.210.270.350.460.58
12211(9.2)3° 19′
14312.5(10.1)4° 22′0.090.110.130.160.20.250.320.42---
16215(13.18)2° 25′0.550.731
314.5(12.1)3° 46′
18416(13.1)4° 33′-
20219(17.18)1° 55′
418(15.1)4° 03′
22519.5(16.1)4° 40′-0.090.110.130.160.190.230.30.380.50.69
25522.5(19)4° 03′
28525.5(22)3° 34′
32629(24.5)3° 46′
36633(28.5)3° 19′-0.110.110.110.130.150.170.220.270.340.46
40637(32.5)2° 57′
50846(40.4)3° 10′
● Runout Measurement Method

Alterations

Part Number—L—F—V—S—Q—(AC, SC, MC, etc.)
MTSRW16—282—F16—V10—S14—Q10—AC13.3

[ ! ] Only AC, SC, MC, MQ and ZC are applicable to Right-Hand Screw with Keyway

AlterationsFlat MachiningRetaining Ring GrooveWrench FlatsCoarse TappingThreadedSquare ChamferingKeyway
Lead Screw - Both Ends Stepped: Related ImageLead Screw - Both Ends Stepped: Related ImageLead Screw - Both Ends Stepped: Related ImageLead Screw - Both Ends Stepped: Related ImageFor Bearing Nut
Lead Screw - Both Ends Stepped: Related Image		Lead Screw - Both Ends Stepped: Related ImageLead Screw - Both Ends Stepped: Related Image
CodeFV (V Part), FQ (Q Part)AC (V Part), AQ (Q Part)SC (V Part), SQ (Q Part)MC (V Part), MQ (Q Part)BV (V Part), BC (Q Part)ZC (V Part), ZQ (Q Part)KV (V Part), KC (Q Part)
Spec.FV,FQ,FW,FY =
0.5 mm Increments
FV = Applied on V part
FQ = Applied on Q part

[ ! ] Applicable to
either V or Q

Ordering Code
FV5−FW10−FY1

[ ! ] FV (FQ) = 0,
or FV (FQ) ≥ 2

[ ! ] When V (Q) ≤ 25
FY ≤ 1.0

[ ! ] When V (Q) ≥ 26
FY ≤ 2.0

[ ! ]3 ≤ FW ≤ 20		AC, AQ = 0.1 mm Increments
AC, AQ ≤ F (S) - m - n
For the m, n value, see the table below
(For the m value, consider the tolerance.)
Ordering Code AC13.3
Applied on AC = V part and AQ = Q part
V·Qe Tolerancem + 0.14

0

nMachining
Limit
64+0.075

0

0.7n ≥ 1.2
7
85
960.9
109.6

0

−0.09		1.15n ≥ 1.5
1211.5

0

−0.11
1413.4
1514.3
1615.2
1716.2
2019

0

−0.21		1.35
2523.9
3028.61.65
3533
4038

0

−0.25		1.9N ≥ 2
[!] Retaining ring is not included.		SC,SQ,SW,SY =
1 mm Increments
Applied on SC = V part
Applied on SQ = Q part

[ ! ] Applicable to
either V or Q

Ordering Code
SC5−SW10−SY8

[ ! ] SC(SQ) = 0, or SC (SQ) ≥ 2

[ ! ] When Q (V) < 15
SW ≥ Q (V) −2

[ ! ] When 15 ≤ Q (V) ≤ 25
SW ≥ Q (V) −3

[ ! ] When 30 ≤ Q (V)
SW ≥ Q (V) −5

[ ! ]3 ≤ SY ≤ 20		MC = Applied on V part
MQ = Applied on Q part
Ordering Code MC24
V·QMC·MQ (Selection Range)
63
7·83·4
9·103·4·5
123·4·5·6
14·153·4·5·6·8
16·173·4·5·6·8·10
203·4·5·6·8·10·12
25·303·4·5·6·8·10·12·16
353·4·5·6·8·10·12·16·20
403·4·5·6·8·10·12·16·20·24

[ ! ] When combining with an other alteration, do not specify this alteration in such a way that the shaft end thickness becomes less than 1 mm

Lead Screw - Both Ends Stepped: Related Image

[ ! ]BV,BC ≤ M × 3
[ ! ] BV, BC ≥ Pitch × 3
[ ! ] BV, BC ≤ F,S - Pitch × 3
Ordering Code BC20
BV = Applied on V part
BC = Applied on Q part
V·QM × Pitch
(Fine)
6M6 × 0.75
8M8 × 1.0
10M10 × 1.0
12M12 × 1.0
14M14 × 1.0
15M15 × 1.0
17M17 × 1.0
20M20 × 1.0
25M25 × 1.5
30M30 × 1.5
35M35 × 1.5
40M40 × 1.5

[ NG ]V,Q = 7·9·16
Not applicable

  Thread Tolerance Zone Class: 6 g		W, A = 1 mm Increments
ZC = Applied on V part
ZQ = Applied on Q part ZE = Applied on E part
[ ! ] Applicable to either V or Q
Ordering Code
ZC10−W8−A8

[ ! ] Can be combined with Tapped Hole machining only on the same shaft.

[ ! ]5 ≤ A ≤ 20
[ ! ] ZC = V, ZQ = Q Specified
ZC = V·ZQ = QW 1 mm Increments
6·75
86
97
108
129 10
14·1510 11 12
1611 12 13
1712 13 14
2014 15 16
2517 to 20
3021 to 24
3525 to 28
4029 to 30
KC, KV, C = 1 mm Increments
Ordering Code KC8−C10
KV = Applied on V part
KC = Applied on Q part

[ ! ] Applicable to either V or Q

[ ! ] Specify the C dimension not to be below b1

[ ! ]C ≤ 60
[ ! ]S (F) −C−KC (KV) ≥ 2
[ ! ]KC (KV) ≥ 2
[ ! ] When KC, KV = 0
Lead Screw - Both Ends Stepped: Related Image
Applicable
Shaft End Dia.
V·Q		Keyway Dimension
b1t1r1
Reference DimensionTolerance
(N9)		Reference DimensionTolerance
6·72−0.004
−0.029		1.2+0.1

0

0.08
Up to 0.16
8 to 1031.8
124

0

−0.030		2.5
14 to 1753.00.16
Up to 0.25
2063.5
25·308

0

−0.036		4.0+0.2

0

35105.00.25
Up to 0.40
4012

0

−0.043		5.0
[!] Key materials are not included.

[!]Specify an alteration position to be 2 mm or more away from the stepped part. (Refer to the diagram in Caution (1))
[!] When adding multiple alterations, there must be 2 mm or more clearance between each machined part. (Refer to the diagram in Caution (2))
[!]When flat machining, wrench flats, square chamfering and keyway alterations are combined with each other, their orientations will be random. (Refer to the diagram in Caution (3))
[!] Do not specify multiple alterations in such a way that they overlap with each other in the rotating direction on the same shaft. (Refer to the diagram in Caution (4))
[ ! ] When two or more alterations are specified on a shaft, they may not be machined due to correlation.

Caution (1)
Specify the alteration portion to be 2 mm or more away from the stepped part
.
Lead Screws - For Support Units: Related Image		Caution (2)
2 mm or more is required for the clearance between multiple alterations
.
Lead Screws - For Support Units: Related Image		Caution (3)
When the multiple alterations are combined with each other, their orientations are random and thus, are not always aligned in a linear arrangement. (One example of this is shown in the diagram below.)　
Lead Screws - For Support Units: Related Image
For Alterations A and B added to the same shaft, as shown in the diagram above, their orientations are random and thus, there are some cases where they are not aligned in a linear arrangement.		Caution (4)
Do not specify multiple alterations in such a way that they overlap with each other on the same shaft.
(Any diagram as shown below is not acceptable.)
Lead Screws - For Support Units: Related Image

 

 
Overlapped portion of Alterations A and B

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
MTSLW10-[80-1000/1]-F[2-49/1]-V[6,​7]-S[2-49/1]-Q[6,​7]
MTSLW12-[80-1000/1]-F[2-63/1]-V[6,​7,​8,​9]-S[2-63/1]-Q[6,​7,​8,​9]
MTSLW14-[80-1000/1]-F[2-70/1]-V[8,​9,​10]-S[2-70/1]-Q[8,​9,​10]
MTSLW16-[100-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSLW18-[150-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSLW20-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSLW22-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSLW25-[150-1200/1]-F[2-119/1]-V[12,​14,​15,​16,​17]-S[2-124/1]-Q[12,​14,​15,​16,​17]
MTSLW28-[150-1200/1]-F[2-140/1]-V[14,​15,​16,​17,​20]-S[2-140/1]-Q[14,​15,​16,​17,​20]
MTSLW32-[200-1200/1]-F[2-175/1]-V[14,​15,​16,​17,​20,​25]-S[2-175/1]-Q[14,​15,​16,​17,​20,​25]
MTSLW36-[200-1200/1]-F[2-175/1]-V[17,​20,​25]-S[2-175/1]-Q[17,​20,​25]
MTSLW40-[200-1200/1]-F[2-210/1]-V[20,​25,​30]-S[2-210/1]-Q[20,​25,​30]
MTSLW50-[200-1200/1]-F[2-280/1]-V[25,​30,​35,​40]-S[2-280/1]-Q[25,​30,​35,​40]
MTSRV12-[80-1000/1]-F[2-63/1]-V[7,​8,​9]-S[2-63/1]-Q[7,​8,​9]-C[3-60/1]-J[0-61/1]
MTSRV14-[80-1000/1]-F[2-70/1]-V[8,​9,​10]-S[2-70/1]-Q[8,​9,​10]-C[3-60/1]-J[0-68/1]
MTSRV16-[100-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]-C[3-60/1]-J[0-82/1]
MTSRV18-[150-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]-C[3-60/1]-J[0-82/1]
MTSRV20-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-150/1]-Q[10,​12,​14,​15]-C[3-60/1]-J[0-103/1]
MTSRV22-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]-C[3-60/1]-J[0-103/1]
MTSRV25-[150-1200/1]-F[2-119/1]-V[12,​14,​15,​16,​17]-S[2-119/1]-Q[12,​14,​15,​16,​17]-C[3-60/1]-J0
MTSRV25-[150-1200/1]-F[2-119/1]-V[12,​14,​15,​16,​17]-S[2-119/1]-Q[12,​14,​15,​16,​17]-C[3-60/1]-J[2-117/1]
MTSRV28-[150-1200/1]-F[2-140/1]-V[14,​15,​16,​17,​20]-S[2-140/1]-Q[14,​15,​16,​17,​20]-C[3-60/1]-J[0-138/1]
MTSRV32-[200-1200/1]-F[2-175/1]-V[14,​15,​16,​17,​20,​25]-S[2-175/1]-Q[14,​15,​16,​17,​20,​25]-C[3-60/1]-J[0-173/1]
MTSRV36-[200-1200/1]-F[2-175/1]-V[17,​20,​25]-S[2-175/1]-Q[17,​20,​25]-C[3-60/1]-J[0-173/1]
MTSRV40-[200-1200/1]-F[2-210/1]-V[20,​25,​30]-S[2-210/1]-Q[20,​25,​30]-C[3-60/1]-J[0-208/1]
MTSRV50-[200-1200/1]-F[2-280/1]-V[25,​30,​35,​40]-S[2-280/1]-Q[25,​30,​35,​40]-C[3-60/1]-J[0-278/1]
MTSRW8-[50-500/1]-F[2-30/1]-V6-S[2-30/1]-Q6
MTSRW10-[80-1000/1]-F[2-49/1]-V[6,​7]-S[2-49/1]-Q[6,​7]
MTSRW12-[80-1000/1]-F[2-63/1]-V[6,​7,​8,​9]-S[2-63/1]-Q[6,​7,​8,​9]
MTSRW14-[80-1000/1]-F[2-70/1]-V[8,​9,​10]-S[2-70/1]-Q[8,​9,​10]
MTSRW16-[100-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSRW18-[150-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSRW20-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSRW22-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSRW25-[150-1200/1]-F[2-119/1]-V[12,​14,​15,​16,​17]-S[2-124/1]-Q[12,​14,​15,​16,​17]
MTSRW28-[150-1200/1]-F[2-140/1]-V[14,​15,​16,​17,​20]-S[2-140/1]-Q[14,​15,​16,​17,​20]
MTSRW32-[200-1200/1]-F[2-175/1]-V[14,​15,​16,​17,​20,​25]-S[2-175/1]-Q[14,​15,​16,​17,​20,​25]
MTSRW36-[200-1200/1]-F[2-175/1]-V[17,​20,​25]-S[2-175/1]-Q[17,​20,​25]
MTSRW40-[200-1200/1]-F[2-210/1]-V[20,​25,​30]-S[2-210/1]-Q[20,​25,​30]
MTSRW50-[200-1200/1]-F[2-280/1]-V[25,​30,​35,​40]-S[2-280/1]-Q[25,​30,​35,​40]
MTSTLW10-[80-1000/1]-F[2-49/1]-V[6,​7]-S[2-49/1]-Q[6,​7]
MTSTLW12-[80-1000/1]-F[2-63/1]-V[6,​7,​8,​9]-S[2-63/1]-Q[6,​7,​8,​9]
MTSTLW14-[80-1000/1]-F[2-70/1]-V[8,​9,​10]-S[2-70/1]-Q[8,​9,​10]
MTSTLW16-[100-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSTLW18-[150-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSTLW20-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSTRW10-[80-1000/1]-F[2-49/1]-V[6,​7]-S[2-49/1]-Q[6,​7]
MTSTRW12-[80-1000/1]-F[2-63/1]-V[6,​7,​8,​9]-S[2-63/1]-Q[6,​7,​8,​9]
MTSTRW14-[80-1000/1]-F[2-70/1]-V[8,​9,​10]-S[2-70/1]-Q[8,​9,​10]
MTSTRW16-[100-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSTRW18-[150-1200/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTSTRW20-[150-1200/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
MTSTRW25-[150-1200/1]-F[2-119/1]-V[12,​14,​15,​16,​17]-S[2-124/1]-Q[12,​14,​15,​16,​17]
MTSTRW28-[150-1200/1]-F[2-140/1]-V[14,​15,​16,​17,​20]-S[2-140/1]-Q[14,​15,​16,​17,​20]
MTSTRW32-[200-1200/1]-F[2-175/1]-V[14,​15,​16,​17,​20,​25]-S[2-175/1]-Q[14,​15,​16,​17,​20,​25]
MTXRW16-[100-1000/1]-F[2-84/1]-V[9,​10,​12]-S[2-84/1]-Q[9,​10,​12]
MTXRW20-[150-1000/1]-F[2-105/1]-V[10,​12,​14,​15]-S[2-105/1]-Q[10,​12,​14,​15]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSScrew Turn Direction Material Surface Treatment Thread Nominal D
(φ) 		Pitch
(mm) 		Shaft Overall Length L
(mm) 		C
(mm) 		F
(mm) 		J
(mm) 		Q
(mm) 		S
(mm) 		V
(mm)
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided10280 ～ 1000-2 ～ 49-6 ～ 72 ～ 496 ～ 7
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided12280 ～ 1000-2 ～ 63-6 ～ 92 ～ 636 ～ 9
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided14380 ～ 1000-2 ～ 70-8 ～ 102 ～ 708 ～ 10
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided163100 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided184150 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided204150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided225150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided255150 ～ 1200-2 ～ 119-12 ～ 172 ～ 12412 ～ 17
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided285150 ～ 1200-2 ～ 140-14 ～ 202 ～ 14014 ～ 20
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided326200 ～ 1200-2 ～ 175-14 ～ 252 ～ 17514 ～ 25
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided366200 ～ 1200-2 ～ 175-17 ～ 252 ～ 17517 ～ 25
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided406200 ～ 1200-2 ～ 210-20 ～ 302 ～ 21020 ～ 30
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided508200 ～ 1200-2 ～ 280-25 ～ 402 ～ 28025 ～ 40
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided12280 ～ 10003 ～ 602 ～ 630 ～ 617 ～ 92 ～ 637 ～ 9
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided14380 ～ 10003 ～ 602 ～ 700 ～ 688 ～ 102 ～ 708 ～ 10
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided163100 ～ 12003 ～ 602 ～ 840 ～ 829 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided184150 ～ 12003 ～ 602 ～ 840 ～ 829 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided204150 ～ 12003 ～ 602 ～ 1050 ～ 10310 ～ 152 ～ 15010 ～ 15
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided225150 ～ 12003 ～ 602 ～ 1050 ～ 10310 ～ 152 ～ 10510 ～ 15
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided255150 ～ 12003 ～ 602 ～ 119-12 ～ 172 ～ 11912 ～ 17
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided255150 ～ 12003 ～ 602 ～ 1192 ～ 11712 ～ 172 ～ 11912 ～ 17
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided285150 ～ 12003 ～ 602 ～ 1400 ～ 13814 ～ 202 ～ 14014 ～ 20
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided326200 ～ 12003 ～ 602 ～ 1750 ～ 17314 ～ 252 ～ 17514 ～ 25
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided366200 ～ 12003 ～ 602 ～ 1750 ～ 17317 ～ 252 ～ 17517 ～ 25
1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided406200 ～ 12003 ～ 602 ～ 2100 ～ 20820 ～ 302 ～ 21020 ～ 30
1 18 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided508200 ～ 12003 ～ 602 ～ 2800 ～ 27825 ～ 402 ～ 28025 ～ 40
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided81.550 ～ 500-2 ～ 30-62 ～ 306
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided10280 ～ 1000-2 ～ 49-6 ～ 72 ～ 496 ～ 7
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided12280 ～ 1000-2 ～ 63-6 ～ 92 ～ 636 ～ 9
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided14380 ～ 1000-2 ～ 70-8 ～ 102 ～ 708 ～ 10
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided163100 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided184150 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided204150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided225150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided255150 ～ 1200-2 ～ 119-12 ～ 172 ～ 12412 ～ 17
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided285150 ～ 1200-2 ～ 140-14 ～ 202 ～ 14014 ～ 20
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided326200 ～ 1200-2 ～ 175-14 ～ 252 ～ 17514 ～ 25
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided366200 ～ 1200-2 ～ 175-17 ～ 252 ～ 17517 ～ 25
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided406200 ～ 1200-2 ～ 210-20 ～ 302 ～ 21020 ～ 30
1 18 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided508200 ～ 1200-2 ～ 280-25 ～ 402 ～ 28025 ～ 40
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided10280 ～ 1000-2 ～ 49-6 ～ 72 ～ 496 ～ 7
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided12280 ～ 1000-2 ～ 63-6 ～ 92 ～ 636 ～ 9
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided14380 ～ 1000-2 ～ 70-8 ～ 102 ～ 708 ～ 10
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided163100 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided184150 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided204150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided10280 ～ 1000-2 ～ 49-6 ～ 72 ～ 496 ～ 7
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided12280 ～ 1000-2 ～ 63-6 ～ 92 ～ 636 ～ 9
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided14380 ～ 1000-2 ～ 70-8 ～ 102 ～ 708 ～ 10
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided163100 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided184150 ～ 1200-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided204150 ～ 1200-2 ～ 105-10 ～ 152 ～ 10510 ～ 15
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided255150 ～ 1200-2 ～ 119-12 ～ 172 ～ 12412 ～ 17
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided285150 ～ 1200-2 ～ 140-14 ～ 202 ～ 14014 ～ 20
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided326200 ～ 1200-2 ～ 175-14 ～ 252 ～ 17514 ～ 25
1 7 Days 10[Right Screw] Fine Pitch Right-hand ScrewEN 1.1191 Equiv.Not Provided162100 ～ 1000-2 ～ 84-9 ～ 122 ～ 849 ～ 12
1 7 Days 10[Right Screw] Fine Pitch Right-hand ScrewEN 1.1191 Equiv.Not Provided202150 ～ 1000-2 ～ 105-10 ～ 152 ～ 10510 ～ 15

Loading...

  1. 1
 

Basic information

Axis shape Both Ends Stepped Type Type Lead Screw Shafts Type of axis Rolled

Configure

Clear all

57Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Screw Turn Direction

    • Right Screw
      • Fine Pitch Right-hand Screw
      • Right-hand Screw with Keyway
      • Right-hand Thread
    • Left-hand Thread

    Clear

  • Material

    • EN 1.1191 Equiv.
    • EN 1.4305 Equiv.

    Clear

  • Thread Nominal D(φ)

    • 8
    • 10
    • 12
    • 14
    • 16
    • 18
    • 20
    • 22
    • 25
    • 28
    • 32
    • 36
    • 40
    • 50

    Clear

  • Pitch(mm)

    • 1.5
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Shaft Overall Length L(mm)

     [50-1200/1mm Unit(s)]

    Clear

  • C(mm)

     [3-60/1mm Unit(s)]

    Clear

  • F(mm)

     [2-280/1mm Unit(s)]

    Clear

  • J(mm)

     [0-278/1mm Unit(s)]

    Clear

  • Q(mm)

    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40

    Clear

  • S(mm)

     [2-280/1mm Unit(s)]

    Clear

  • V(mm)

    • 6
    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40

    Clear

  • Type

    • MTSBLW
    • MTSBRV
    • MTSBRW
    • MTSLW
    • MTSRV
    • MTSRW
    • MTSTLW
    • MTSTRW
    • MTXBRW
    • MTXRW
    • RMTSLW
    • RMTSRV
    • RMTSRW

    Clear

  • Surface Treatment

    • Not Provided
    • LTBC Plating
    • Black Oxide

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 12 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.