• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Lead Screws / One End Stepped / One End Double Stepped DIN 103

Lead Screws / One End Stepped / One End Double Stepped DIN 103

MISUMI

MISUMI

[Features] Easy installation in the trapezoidal spindle support unit.

(i)Remark

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

Right-Hand Screw / Left-Hand Screw
Lead Screw - One End Stepped / One End Double Stepped: Related Image		h7 Tolerance (V,Q)
Overor LessTolerance
360
－0.012
6100
－0.015
10180
－0.018
18300
－0.021
30500
－0.025
Compliant with JIS B 0401		Unspecified Dimensional Tolerances
Overor LessTolerance
0.53±0.1
36±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
10002000±1.2
Compliant with JIS B 0405 Class m (Middle Class)
 
Type[M] Material[S] Surface Treatment
Right-Hand ScrewLeft-Hand Screw
MTSRKMTSLKEN 1.1191 Equiv.—
MTSBRKMTSBLKBlack Oxide
RMTSRKRMTSLKLow Temperature Black Chrome Plating
MTSTRKMTSTLKEN 1.4305 Equiv.—
·No hardening treatment is applied.		Lead Screw Accuracy
ItemContent
Standard ChevronTr Standard (Old TM Standard)
Tolerance and Allowable DimensionJIS B 0217-1,2
Screw Accuracy (Threaded)7e
Nut Accuracy (Tapped)7H
Single Pitch Error±0.02
Accumulated Pitch Error±0.15/300 mm
The Tr standard has the same standard dimensions as the old JIS TM standard (abolished).
Dimensional tolerances are regulated for Tr standard.
Refer to the table below for Lead Screw Specifications.		Standard Chevron Dimensions

H = 1.866P, H1 = 0.5P, d2 = d - 0.5P
d1 = d-P, D = d, D2 = d2, D1 = d1
Thread d: O.D. d1: Root Dia. d2: Effective Dia.
Tapped D: Root Dia. D1: I.D. D2: Effective Dia.
P: Pitch H1: Engage Height

Specification Table

Part Number—L—F—R—T—Q—S—E
MTSRK16—456—F37—R10—T20—Q12—S10—E9
Part Number1 mm IncrementsQ / R selectionEDPitch
P
TypeDLF·T·S1 mm Increments
Right-Hand Screw
MTSRK
MTSBRK
RMTSRK　　(D ≤ 32)
MTSTRK (Stainless Steel)
Left-Hand Screw
MTSLK
MTSBLK
RMTSLK　　(D ≤ 32)
MTSTLK (Stainless Steel)		1280 to 1000The selectable length varies depending on the shaft diameter.

When Q, V, R, E ≤ 9

2 ≤ F ≤ E (R) ×5
2 ≤ G ≤ V × 5
2 ≤ S ≤ E (R) ×5
2 ≤ T ≤ Q × 5

When Q, V, R, E ≥ 10

2 ≤ F ≤ E (R) ×7
2 ≤ G ≤ V × 7
2 ≤ S ≤ E (R) ×7
2 ≤ T ≤ Q × 7		789   Q/2 ≤ E ≤ Q−1122
148910   143
16100 to 120091012   16(3)
18150 to 120091012   184
2010121415  204
2210121415  225
251214151617 25(5)
281415161720 285
32200 to 1200141516172025326
36172025   366
40202530   40(6)
5025303540  508
[!] When combined with position indicators, the standard Q dimensions are 8 to 20.
[!] D dimension 22, 36, 40 and 50 are not applicable to Stainless Steel. D dimension 25, 28 and 32 are applicable to Right-Hand Thread only.
[ ! ] This product is a single thread screw and therefore the pitch P = lead.
[ ! ] Sizes in ( ) are outside the Tr standard, but the machining accuracy of all sizes conforms to the Tr standard.

[!] Recommended Grease: Lithium soap-based grease No. 2 (Please wipe off the antirust oil before applying.)
Lead Screw SpecificationsUnit: mm
Shaft Dia.PitchThread Shaft
Effective Dia.		Screw Shaft
Minor Dia.
(MIN)		Thread Shaft
Lead Angle		Screw Shaft Runout (Max.)
Shaft Overall Length
Up to 125126
Up to 200		201
Up to 315		316
Up to 400		401
Up to 500		501
Up to 630		631
Up to 800		801
Up to 1000		1001
Up to 1250		1251
Up to 1600		1601
Up to 2000
81.57.25(5.9)3° 46′0.10.140.210.270.35------
1029(7.2)4° 03′0.090.120.160.210.270.350.460.58
12211(9.2)3° 19′
14312.5(10.1)4° 22′0.090.110.130.160.20.250.320.42---
16215(13.18)2° 25′0.550.731
314.5(12.1)3° 46′
18416(13.1)4° 33′-
20219(17.18)1° 55′
418(15.1)4° 03′
22519.5(16.1)4° 40′-0.090.110.130.160.190.230.30.380.50.69
25522.5(19)4° 03′
28525.5(22)3° 34′
32629(24.5)3° 46′
36633(28.5)3° 19′-0.110.110.110.130.150.170.220.270.340.46
40637(32.5)2° 57′
50846(40.4)3° 10′
● Runout Measurement Method

Alterations

Part Number—L—F—R—T—Q—S—E—(AR, SE, MR..., etc.)
MTSTRK16—456—F37—R10—T20—Q12—S10—E9—MR4
AlterationsFlat MachiningRetaining Ring GrooveWrench FlatsCoarse TappingThreadedSquare ChamferingKeyway
Lead Screw - One End Stepped / One End Double Stepped: Related ImageLead Screw - One End Stepped / One End Double Stepped: Related ImageLead Screw - One End Stepped / One End Double Stepped: Related ImageLead Screw - One End Stepped / One End Double Stepped: Related ImageFor Bearing Nut
Lead Screw - One End Stepped / One End Double Stepped: Related Image		Lead Screw - One End Stepped / One End Double Stepped: Related ImageLead Screw - One End Stepped / One End Double Stepped: Related Image
CodeFE (E Part) FR (R Part)AR (R Part) AE (E Part)SE (E Part) SR (R Part)MR (R Part) ME (E Part)BQ (Q Part) BV (V Part) BR (R Part)ZE (E Part) ZR (R Part)KQ (Q Part) KV (V Part) KE (E Part) KR (R Part)
Spec.FE,FR,FW,FY =
0.5 mm Increments
FE = Applied on E part
FR = Applied on R part
Ordering Code
FR5−FW10−FY1

[ ! ] Applicable to either E or R

[ ! ]when E(R) ≤ 25
FY ≤ 1.0

[ ! ]when E(R) ≥ 26
FY ≤ 2.0

[ ! ]3 ≤ FW ≤ 20

[ ! ] FE(FR) = 0,
or FE ≥ 2

AR, AE = 0.1 mm Increments
AR ≤ S(F) - m - n
・ Type A
AE ≤ T + S - m - n
・ Type B
AE ≤ F + G - m - n
For the m, n value, see the table below
(For the m value, consider the tolerance.)
Ordering Code AE13.3
AR = Applied on R part
AE = Applied on E part
R·Ee Tolerancem + 0.14

0

nMachining
Limit
74+0.075

0

0.7n ≥ 1.2
85
960.9
109.6

0

−0.09		1.15n ≥ 1.5
1211.5

0

−0.11
1413.4
1514.3
1615.2
1716.2
2019

0

−0.21		1.35
2523.9
3028.61.65
3533
4038

0

−0.25		1.9N ≥ 2
[!] Retaining ring is not included. 		SE,SW,SY =
1 mm Increments
SE = Applied on E part
SR = Applied on R part

[ ! ]Applicable to either E or R

Ordering Code
SE3−SW10−SY7

[ ! ] when E(R) < 15
SW ≥ E (R) −2

[ ! ]when 15 ≤ E(R) ≤ 25
SW ≥ E (R) −3

[ ! ] when 30 ≤ E(R)
SW ≥ E (R) −5

[ ! ]3 ≤ SY ≤ 20

[ ! ] SE(SR) = 0, or SE(SR) ≥ 2

MR = Applied on R part
ME = Applied on E part
Ordering Code MR24
R·EME·MR (Selection Range)
5·63
7·83·4
9·103·4·5
11·123·4·5·6
13 to 153·4·5·6·8
16 to 243·4·5·6·8·10
25 to 303·4·5·6·8·10·12·16
31 to 393·4·5·6·8·10·12·16·20
403·4·5·6·8·10·12·16·20·24·30
[NG] R, E = 4 not applicable

[ ! ]When combining with an other alteration, do not specify this alteration in such a way that the shaft end thickness becomes less than 1 mm.

Lead Screw - One End Stepped / One End Double Stepped: Related Image

[ NG ]Q·V·R = 7·9·16
Not applicable

[ ! ]BQ,BV,BR ≤ M × 3
[ ! ] BQ, BV, BR ≥ Pitch × 3
[ ! ] BQ, BV, BR ≤ F, S, T, G - Pitch × 3
Ordering Code BR20
BQ = Applied on Q part
BV = Applied on V part
BR = Applied on R part
Q·V·RM × Pitch
(Fine)
8M8 × 1.0
10M10 × 1.0
12M12 × 1.0
14M14 × 1.0
15M15 × 1.0
17M17 × 1.0
20M20 × 1.0
25M25 × 1.5
30M30 × 1.5
35M35 × 1.5
40M40 × 1.5
Thread Tolerance Zone Class: 6 g		W, A = 1 mm Increments
ZE = Applied on E part
ZR = Applied on R part
Ordering Code ZE12-W10-A8

[ ! ]
Applicable to only one of either E or R

[ ! ] Can be combined with Tapped Hole machining only on the same shaft

[ ! ]5 ≤ A ≤ 20
[ ! ]S (F) ≥ A+2
[ ! ] ZR = R Specified, ZR > W
[ ! ] ZE = E Specified, ZE > W
ZE = E·ZR = RW 1 mm Increments
6 to 105 to 8
11 to 148 to 10
15 to 1910 to 14
20 to 2514 to 20
26 to 3019 to 24
31 to 3522 to 28
36 to 4026 to 30
(E·R/2) √2 ≤ W
Manufacturing may not be possible depending on the relationship between E/R and W.
KQ,KV,KE,KR,C =
1 mm Increments
KQ = Applied on Q part
KV = Applied on V part
KE = Applied on E part
KR = Applied on R part
Ordering Code KQ8−C10

[ ! ] Applicable to only one of Q, V, E, or R

[ ! ] Specify the C dimension not to be below b1
[ ! ]C ≤ 60
[ ! ]T (G) −C−KQ (KV) ≥ 2
[ ! ]S (F) −C−KE (KR) ≥ 2
[ ! ]KQ (KV·KE·KR) ≥ 2

[ ! ] When KQ (KV, KE, KR) = 0,
keyway
R will be eliminated on the shaft end side.

Applicable
Shaft End Dia.
Q·V·E·R		Keyway Dimension
b1t1r1
Standard
Dimension		Tolerance
(N9)		Standard
Dimension		Tolerance
6· 72−0.004
−0.029		1.2+0.1

0

0.08
Up to 0.16
8 to 1031.8
11·124

0

−0.030		2.5
13 to 1753.00.16
Up to 0.25
18 to 2263.5
23 to 308

0

−0.036		4.0+0.2

0

31 to 38105.00.25
Up to 0.40
39·4012

0

−0.043		5.0
[!] Key materials are not included.

[!]Specify an alteration position to be 2 mm or more away from the stepped part. (Refer to the diagram in Caution (1))
[!] When adding multiple alterations, there must be 2 mm or more clearance between each machined part. (Refer to the diagram in Caution (2))
[!]When flat machining, wrench flats, square chamfering and keyway alterations are combined with each other, their orientations will be random. (Refer to the diagram in Caution (3))
[!] Do not specify multiple alterations in such a way that they overlap with each other in the rotating direction on the same shaft. (Refer to the diagram in Caution (4))
[ ! ] When two or more alterations are specified on a shaft, they may not be machined due to correlation.

Caution (1)
Specify the alteration portion to be 2 mm or more away from the stepped part
.
Lead Screw - One End Stepped / One End Double Stepped		Caution (2)
2 mm or more is required for the clearance between multiple alterations
.
Lead Screw - One End Stepped / One End Double Stepped		Caution (3)
When the multiple alterations are combined with each other, their orientations are random and thus, are not always aligned in a linear arrangement. (One example of this is shown in the diagram below.)　
Lead Screw - One End Stepped / One End Double Stepped
For Alterations A and B added to the same shaft, as shown in the diagram above, their orientations are random and thus, there are some cases where they are not aligned in a linear arrangement.		Caution (4)
Do not specify multiple alterations in such a way that they overlap with each other on the same shaft.
(Any diagram as shown below is not acceptable.)
Lead Screw - One End Stepped / One End Double Stepped

 

 
Overlapped portion of Alterations A and B

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
MTSLK12-[80-1000/1]-F[2-63/1]-R[7,​8,​9]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[4-8/1]
MTSLK14-[80-1000/1]-F[2-70/1]-R[8,​9,​10]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[4-9/1]
MTSLK16-[100-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSLK18-[150-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSLK20-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSLK22-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSLK25-[150-1200/1]-F[2-119/1]-R[12,​14,​15,​16,​17]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-119/1]-E[6-16/1]
MTSLK28-[150-1200/1]-F[2-140/1]-R[14,​15,​16,​17,​20]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-140/1]-E[7-19/1]
MTSLK32-[150-1200/1]-F[2-175/1]-R[14,​15,​16,​17,​20,​25]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-175/1]-E[7-24/1]
MTSLK36-[150-1200/1]-F[2-175/1]-R[17,​20,​25]-T[2-175/1]-Q[17,​20,​25]-S[2-175/1]-E[9-24/1]
MTSLK40-[150-1200/1]-F[2-210/1]-R[20,​25,​30]-T[2-210/1]-Q[20,​25,​30]-S[2-210/1]-E[10-29/1]
MTSLK50-[150-1200/1]-F[2-280/1]-R[25,​30,​35,​40]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-280/1]-E[13-39/1]
MTSRK12-[80-1000/1]-F[2-63/1]-R[7,​8,​9]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[4-8/1]
MTSRK14-[80-1000/1]-F[2-70/1]-R[8,​9,​10]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[4-9/1]
MTSRK16-[100-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSRK18-[150-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSRK20-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSRK22-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSRK25-[150-1200/1]-F[2-119/1]-R[12,​14,​15,​16,​17]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-119/1]-E[6-16/1]
MTSRK28-[150-1200/1]-F[2-140/1]-R[14,​15,​16,​17,​20]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-140/1]-E[7-19/1]
MTSRK32-[200-1200/1]-F[2-175/1]-R[14,​15,​16,​17,​20,​25]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-175/1]-E[7-24/1]
MTSRK36-[200-1200/1]-F[2-175/1]-R[17,​20,​25]-T[2-175/1]-Q[17,​20,​25]-S[2-175/1]-E[9-24/1]
MTSRK40-[200-1200/1]-F[2-210/1]-R[20,​25,​30]-T[2-210/1]-Q[20,​25,​30]-S[2-210/1]-E[10-29/1]
MTSRK50-[200-1200/1]-F[2-280/1]-R[25,​30,​35,​40]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-280/1]-E[13-39/1]
MTSTLK12-[80-1000/1]-F[2-63/1]-R[7,​8,​9]-T[2-63/1]-Q[8,​9]-S[2-63/1]-E[4-8/1]
MTSTLK14-[80-1000/1]-F[2-70/1]-R[8,​9,​10]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[4-9/1]
MTSTLK16-[100-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSTLK18-[150-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSTLK20-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSTRK12-[80-1000/1]-F[2-63/1]-R[7,​8,​9]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[4-8/1]
MTSTRK14-[80-1000/1]-F[2-70/1]-R[8,​9,​10]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[4-9/1]
MTSTRK16-[100-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSTRK18-[150-1200/1]-F[2-84/1]-R[9,​10,​12]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[5-11/1]
MTSTRK20-[150-1200/1]-F[2-105/1]-R[10,​12,​14,​15]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[5-14/1]
MTSTRK25-[150-1200/1]-F[2-119/1]-R[12,​14,​15,​16,​17]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-119/1]-E[6-16/1]
MTSTRK28-[150-1200/1]-F[2-140/1]-R[14,​15,​16,​17,​20]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-140/1]-E[7-19/1]
MTSTRK32-[200-1200/1]-F[2-175/1]-R[14,​15,​16,​17,​20,​25]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-175/1]-E[7-24/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSScrew Turn Direction Material Surface Treatment Thread Nominal D
(φ) 		Pitch
(mm) 		Shaft Overall Length L
(mm) 		E
(mm) 		F
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		T
(mm)
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided12280 ～ 10004 ～ 82 ～ 637 ～ 97 ～ 92 ～ 632 ～ 63
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided14380 ～ 10004 ～ 92 ～ 708 ～ 108 ～ 102 ～ 702 ～ 70
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided163100 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided184150 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided204150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided225150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided255150 ～ 12006 ～ 162 ～ 11912 ～ 1712 ～ 172 ～ 1192 ～ 119
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided285150 ～ 12007 ～ 192 ～ 14014 ～ 2014 ～ 202 ～ 1402 ～ 140
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided326150 ～ 12007 ～ 242 ～ 17514 ～ 2514 ～ 252 ～ 1752 ～ 175
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided366150 ～ 12009 ～ 242 ～ 17517 ～ 2517 ～ 252 ～ 1752 ～ 175
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided406150 ～ 120010 ～ 292 ～ 21020 ～ 3020 ～ 302 ～ 2102 ～ 210
1 7 Days 10Left-hand ThreadEN 1.1191 Equiv.Not Provided508150 ～ 120013 ～ 392 ～ 28025 ～ 4025 ～ 402 ～ 2802 ～ 280
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided12280 ～ 10004 ～ 82 ～ 637 ～ 97 ～ 92 ～ 632 ～ 63
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided14380 ～ 10004 ～ 92 ～ 708 ～ 108 ～ 102 ～ 702 ～ 70
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided163100 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided184150 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided204150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided225150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided255150 ～ 12006 ～ 162 ～ 11912 ～ 1712 ～ 172 ～ 1192 ～ 119
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided285150 ～ 12007 ～ 192 ～ 14014 ～ 2014 ～ 202 ～ 1402 ～ 140
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided326200 ～ 12007 ～ 242 ～ 17514 ～ 2514 ～ 252 ～ 1752 ～ 175
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided366200 ～ 12009 ～ 242 ～ 17517 ～ 2517 ～ 252 ～ 1752 ～ 175
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided406200 ～ 120010 ～ 292 ～ 21020 ～ 3020 ～ 302 ～ 2102 ～ 210
1 18 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided508200 ～ 120013 ～ 392 ～ 28025 ～ 4025 ～ 402 ～ 2802 ～ 280
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided12280 ～ 10004 ～ 82 ～ 638 ～ 97 ～ 92 ～ 632 ～ 63
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided14380 ～ 10004 ～ 92 ～ 708 ～ 108 ～ 102 ～ 702 ～ 70
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided163100 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided184150 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10Left-hand ThreadEN 1.4305 Equiv.Not Provided204150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided12280 ～ 10004 ～ 82 ～ 637 ～ 97 ～ 92 ～ 632 ～ 63
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided14380 ～ 10004 ～ 92 ～ 708 ～ 108 ～ 102 ～ 702 ～ 70
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided163100 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided184150 ～ 12005 ～ 112 ～ 849 ～ 129 ～ 122 ～ 842 ～ 84
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided204150 ～ 12005 ～ 142 ～ 10510 ～ 1510 ～ 152 ～ 1052 ～ 105
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided255150 ～ 12006 ～ 162 ～ 11912 ～ 1712 ～ 172 ～ 1192 ～ 119
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided285150 ～ 12007 ～ 192 ～ 14014 ～ 2014 ～ 202 ～ 1402 ～ 140
1 7 Days 10[Right Screw] Right-hand ThreadEN 1.4305 Equiv.Not Provided326200 ～ 12007 ～ 242 ～ 17514 ～ 2514 ～ 252 ～ 1752 ～ 175

Loading...

  1. 1

App. Example

MTUZLead Screw Support Unit - Support Side
MTSFRLead Screw Nut - Flanged
DNBBNut Bracket for Lead Screw
MTWKLead Screw - For Support Units
MTWZ-SLead Screw Support Unit - Stop Plate Set
AHLN100Five Spoked Handwheel
WSSBMetal Washer
■Slide Base Transfer Unit
Combined application example with Support Units.
[ ! ] When considering adopting support units in combination either with Right-Hand Thread type or Left-Hand Thread type lead screws, ordering of "Lead Screw - For Lead Screw Support Unit Type"is recommended.
 

Basic information

Axis shape One End Stepped, One End Double Stepped Type Type Lead Screw Shafts Type of axis Rolled

Configure

Clear all

37Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Screw Turn Direction

    • Right Screw
      • Right-hand Thread
    • Left-hand Thread

    Clear

  • Material

    • EN 1.1191 Equiv.
    • EN 1.4305 Equiv.

    Clear

  • Thread Nominal D(φ)

    • 12
    • 14
    • 16
    • 18
    • 20
    • 22
    • 25
    • 28
    • 32
    • 36
    • 40
    • 50

    Clear

  • Pitch(mm)

    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Shaft Overall Length L(mm)

     [80-1200/1mm Unit(s)]

    Clear

  • E(mm)

     [4-39/1mm Unit(s)]

    Clear

  • F(mm)

     [2-280/1mm Unit(s)]

    Clear

  • Q(mm)

    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40

    Clear

  • R(mm)

    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40

    Clear

  • S(mm)

     [2-280/1mm Unit(s)]

    Clear

  • T(mm)

     [2-280/1mm Unit(s)]

    Clear

  • Type

    • MTSBLK
    • MTSBRK
    • MTSLK
    • MTSRK
    • MTSTLK
    • MTSTRK
    • RMTSLK
    • RMTSRK

    Clear

  • Surface Treatment

    • Not Provided
    • LTBC Plating
    • Black Oxide

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 12 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.