• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Lead Screws / One End Double Stepped DIN 103

Lead Screws / One End Double Stepped DIN 103

MISUMI

MISUMI

[Features] 30-degree trapezoidal lead screw used when there is no problem with a cantilever.

(i)Remark

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

One End Double Stepped
Right-hand screw (3)  
Right-hand screw with keyway (4)

[ ! ] Keyway machining details conform to Shaft Keyway Dimensions shown on "Keyway" of the alteration column.

 [M] Material[S] Surface Treatment
One End Double Stepped
(3)(4)
Right-Hand ScrewRight-Hand Screw with Keyway
MTSRC

MTSRD

EN 1.1191 Equiv.—
MTSBRCMTSBRDBlack Oxide
RMTSRCRMTSRDLow Temperature Black Chrome Plating
MTSTRC—EN 1.4305 Equiv.—
● Single Pitch Error: ±0.02 mm ●Accumulated pitch error: ±0.15/300 mm

Specification Table

Part Number—L—T—Q—S—E—C—J—B
MTSRC16
MTSRD16		—
—		456
456		—
—		T20
T20		—
—		Q12
Q12		—
—		S10
S10		—
—		E9
E8
—
C5
—
J0
—
B10
■Right-Hand Screw
Part Number1 mm IncrementsQ SelectionEDPitch
TypeDLT·S1 mm IncrementsP
(3) One End Double Stepped
MTSRC
MTSBRC
RMTSRC
(D ≤ 32)
MTSTRC
(Stainless Steel)		1280 to 1000The selectable length varies depending on the shaft diameter.

When Q, E ≤ 9
2 ≤ S ≤ Q (E) ×5
2 ≤ T ≤ Q × 5

When Q, E ≥ 10
2 ≤ S ≤ Q (E) ×7
2 ≤ T ≤ Q × 7		 789  Q/2 ≤ E ≤ Q−1122
14 8910   143
16100 to 120091012   163
18150 to 120091012   184
2010121415  204
2210121415  225
251214151617 255
281415161720 285
32200 to 1200141516172025326
36172025   366
40202530   406
5025303540  508
[!] When combined with position indicators, the standard Q dimensions are 8 to 20.
[ ! ] D dimension 22, 36, 40 and 50 are not applicable to Stainless Steel.
■Right-Hand Screw with Keyway
Part Number1 mm IncrementsQ Selection1 mm IncrementsM × PitchDPitch
TypeDLT·SECJBP
(4) One End Double Stepped
MTSRD
MTSBRD
RMTSRD (D ≤ 32)		1280 to 1000The selectable length varies depending on the shaft diameter.

When Q, E ≤ 9
2 ≤ S ≤ Q (E) ×5
2 ≤ T ≤ Q × 5

When Q, E ≥ 10
2 ≤ S ≤ Q (E) ×7
2 ≤ T ≤ Q × 7		789   E ≥ 6
Q/2 ≤ E ≤ Q−2		C ≤ 60
S−C−J ≥ 2		J ≥ 2
or J = 0

[ ! ] When J = 0, keyway R will be eliminated on the shaft end side.		[ ! ] Only for One End Double Stepped Type
　

When Q ≤ 20
3 ≤ B ≤ Q × 3
B ≤ T－3

When Q ≤ 25
5 ≤ B ≤ Q × 3
B ≤ T－5

When any thread is not added,
B = 0		[ ! ]Q = M
M8 × 1.0
M10 × 1.0
M12 × 1.0
M14 × 1.0
M15 × 1.0
M17 × 1.0
M20 × 1.0
M25 × 1.5
M30 × 1.5
M35 × 1.5
M40 × 1.5
[NG] Not applicable to 7, 9, 16		122
148910   143
16100 to 120091012   163
18150 to 120091012   184
2010121415  204
2210121415  225
251214151617 255
281415161720 285
32200 to 1200141516172025326
36172025   366
40202530   406
5025303540  508
[!] When combined with position indicators, the standard Q dimensions are 8 to 20.

cAlterations

Part Number—L—S—Q—C—J—(MC· MQ, etc.)
MTSRB16—456—S10—Q12—C5—J0—MC8
AlterationsFlat MachiningRetaining Ring GrooveWrench FlatsCoarse TappingThreadedSquare ChamferingKeyway
Lead Screw - One End Stepped: Related ImageLead Screw - One End Stepped: Related ImageLead Screw - One End Stepped: Related ImageLead Screw - One End Stepped: Related ImageFor Bearing Nut
Lead Screw - One End Stepped: Related Image		Lead Screw - One End Stepped: Related ImageLead Screw - One End Stepped: Related ImageLead Screw - One End Stepped: Related Image
CodeFC (Q Part) FE (E Part)AE (E Part)SC (Q Part), SE (E Part)MC (Left End) MQ (Q Part)·ME (E Part)BQ (Q part)ZQ (Q Part) ZE (E Part)KQ (Q Part) KE (E Part)
Spec.

[NG] FC is not applicable to One End Double Stepped Type


FC,FE,FW,FY =
0.5 mm Increments

FC = Applied on Q part
FE = Applied on E part

[ ! ] Q and E only applicable in one location


Ordering Code
FC5−FW10−FY1
 

[ ! ]FC (FE) = 0
or
FC (FE) ≥ 2

[ ! ] When Q(E) ≤ 25
FY ≤ 1.0

[ ! ] When Q(E) ≥ 26
FY ≤ 2.0

[ ! ]3 ≤ FW ≤ 20

[NG]Not applicable to One End Stepped Type (including with Right-Hand Thread type with Keyway).


AE = 0.1 mm Increments
AE ≤ S + T - m - n
For the m, n value, see the table below
(For the m value, consider the tolerance.)
Ordering Code AE13.3
AE = Applied on E part
Ee Tolerancem + 0.14

0

n Machining Limit
Limit
74+0.075

0

0.7n ≥ 1.2
85
960.9
109.6

0

−0.09		1.15n ≥ 1.5
1211.5

0

−0.11
1413.4
1514.3
1615.2
1716.2
2019

0

−0.21		1.35
2523.9
3028.61.65
3533
4038

0

−0.25		1.9N ≥ 2

[NG]SC is not applicable to One End Double Stepped Type


SC,SE,SW,SY =
1 mm Increments
SC = Applied on Q part
SE = Applied on E part

[ ! ]Q and E only applicable in one location


Ordering Code
SC3−SW10−SY7

[ ! ]SC (SE) = 0
or
SC(SE) ≥ 2

[ ! ]When Q, E < 15
SW ≥ E (Q) −2

[ ! ] When 15 ≤ Q, E ≤ 25
SW ≥ E (Q) −3

[ ! ] When 30 ≤ Q, E
SW ≥ E (Q) −5

[ ! ]3 ≤ SY ≤ 20		[NG] E = 3, 4 not applicable
[NG]E ≤ 8 is not applicable to Right-Hand Screw with Keyway

MC = Applied on the Left End
MQ = Applied on Q part
ME = Applied on E part

Ordering Code MQ24
D·Q·EMC·MQ·ME (Selection Range)
5·63
7·83·4
9·103·4·5
11·123·4·5·6
13 to 153·4·5·6·8
16 to 243·4·5·6·8·10
25 to 303·4·5·6·8·10·12·16
31 to 393·4·5·6·8·10·12·16·20
40·503·4·5·6·8·10·12·16·20·24·30
[ ! ] See below for Right-Hand Screw with Keyway (MQ)
Q·EMQ (Selection Range)
93
10·113·4
12·133 to 5
14·153 to 6
16 to 183 to 8
19·203 to 10
21 to 253 to 12
26 to 313 to 16
32 to 403 to 20

[ ! ]When combining with an other alteration, do not specify this alteration in such a way that the shaft end thickness becomes less than 1 mm.

Lead Screw - One End Double Stepped: Related Image		[NG]Not applicable when Q = 7, 9, 16
[ ! ]BQ ≤ M × 3
[ ! ] BQ ≥ Pitch × 3
[ ! ] BQ ≤ S, T - Pitch × 3

[ ! ] Only for One End Double Stepped Type, when 25 ≤ Q ≤ 40, Q ≥ E + 3.


Ordering Code BQ20
BQ = Applied on Q part
QM × Pitch
6M6 × 0.75
8M8 × 1.0
10M10 × 1.0
12M12 × 1.0
14M14 × 1.0
15M15 × 1.0
17M17 × 1.0
20M20 × 1.0
25M25 × 1.5
30M30 × 1.5
35M35 × 1.5
40M40 × 1.5

[NG]ZQ is not applicable to One End Double Stepped Type.


W, A = 1 mm Increments
ZQ = Applied on Q part, ZE = Applied on E part

Ordering Code ZQ15−W10−A10

[ ! ] Can be combined with Tapped Hole machining only on the same shaft.

[ ! ]5 ≤ A ≤ 20
[ ! ]S ≥ A+2

[ ! ]Specify ZQ = Q Specify ZE = E

ZQ = QW 1 mm Increments
6·75
86
97
108
129 10
14·1510 11 12
1611 12 13
1712 13 14
2014 15 16
2517 to 20
3021 to 24
3525 to 28
4029 to 30
ZE = EW 1 mm Increments
6 to 105 to 8
11 to 148 to 10
15 to 1910 to 14
20 to 2514 to 20
26 to 3019 to 24
31 to 3522 to 28
36 to 4026 to 30
(E/2) √2 ≤ W [ ! ]ZE > W
May not be manufacturable depending on the relation between E and W.
KQ, KE, C = 1 mm Increments
KQ = Applied on Q part
KE = Applied on E part

[ ! ]Q and E only applicable in one location



Ordering Code KQ8−C10
Specify the C dimension not to be below b1.
[ ! ]C ≤ 60
[ ! ]T−C−KQ ≥ 2
[ ! ]KQ (KE) ≥ 2

[ ! ] When KQ,KE = 0,
keyway R will be eliminated on the shaft end side
.

Lead Screw - One End Stepped: Related Image
Applicable
Shaft End Dia.
Q·E		Keyway Dimension
b1t1r1
Standard
Dimension		Tolerance
(N9)		Standard
Dimension		Tolerance
6·72−0.004
−0.029		1.2+0.1
0		0.08
Up to 0.16
8 to 1031.8
11·124

0

−0.030		2.5
13 to 17530.16
Up to 0.25
18 to 2263.5
23 to 308

0

−0.036		4+0.2
0
31 to 381050.25
Up to 0.40
39·4012

0

−0.043		5

[!]Specify an alteration position to be 2 mm or more away from the stepped part. (Refer to the diagram in Caution (1))
[!] When adding multiple alterations, there must be 2 mm or more clearance between each machined part. (Refer to the diagram in Caution (2))
[!]When flat machining, wrench flats, square chamfering and keyway alterations are combined with each other, their orientations will be random. (Refer to the diagram in Caution (3))
[!] Do not specify multiple alterations in such a way that they overlap with each other in the rotating direction on the same shaft. (Refer to the diagram in Caution (4))
[ ! ] When two or more alterations are specified on a shaft, they may not be machined due to correlation.

Caution (1)
Specify the alteration portion to be 2 mm or more away from the stepped part
.
Lead Screw - One End Stepped: Related Image		Caution (2)
2 mm or more is required for the clearance between multiple alterations
.
Lead Screw - One End Stepped: Related Image		Caution (3)
When the multiple alterations are combined with each other, their orientations are random and thus, are not always aligned in a linear arrangement. (One example of this is shown in the diagram below.)　
Lead Screw - One End Stepped: Related Image
For Alterations A and B added to the same shaft, as shown in the diagram above, their orientations are random and thus, there are some cases where they are not aligned in a linear arrangement.		Caution (4)
Do not specify multiple alterations in such a way that they overlap with each other on the same shaft.
(Any diagram as shown below is not acceptable.)
Lead Screw - One End Stepped: Related Image

 

 
Overlapped portion of Alterations A and B

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
MTSBRC12-[80-1000/1]-T[2-45/1]-Q[7,​8,​9]-S[2-40/1]-E[4-8/1]
MTSBRC14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-45/1]-E[4-9/1]
MTSBRC16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-77/1]-E[5-11/1]
MTSBRC18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-77/1]-E[5-11/1]
MTSBRC20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-98/1]-E[5-14/1]
MTSBRC22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-98/1]-E[5-14/1]
MTSBRC25-[150-1200/1]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-112/1]-E[6-16/1]
MTSBRC28-[150-1200/1]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-133/1]-E[7-19/1]
MTSBRC32-[200-1200/1]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-168/1]-E[7-24/1]
MTSBRC36-[200-1200/1]-T[2-175/1]-Q[17,​20,​25]-S[2-168/1]-E[9-24/1]
MTSBRC40-[200-1200/1]-T[2-210/1]-Q[20,​25,​30]-S[2-203/1]-E[10-29/1]
MTSBRC50-[200-1200/1]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-273/1]-E[13-39/1]
MTSBRD12-[80-1000/1]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[6-8/1]-C[3-60/1]-J[2-61/1]-B0
MTSBRD12-[80-1000/1]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[6-8/1]-C[3-60/1]-J[2-61/1]-B[3-24/1]
MTSBRD14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[6-9/1]-C[4-60/1]-J[2-68/1]-B0
MTSBRD14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[6-9/1]-C[4-60/1]-J[2-68/1]-B[3-30/1]
MTSBRD16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B0
MTSBRD16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B[3-36/1]
MTSBRD18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B0
MTSBRD18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B[3-36/1]
MTSBRD20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B0
MTSBRD20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B[0-45/1]
MTSBRD22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B0
MTSBRD22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B[3-45/1]
MTSBRD25-[150-1200/1]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-119/1]-E[6-16/1]-C[5-60/1]-J[2-117/1]-B0
MTSBRD25-[150-1200/1]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-119/1]-E[6-16/1]-C[5-60/1]-J[2-117/1]-B[3-51/1]
MTSBRD28-[150-1200/1]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-140/1]-E[6-19/1]-C[5-60/1]-J[2-138/1]-B0
MTSBRD28-[150-1200/1]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-140/1]-E[6-19/1]-C[5-60/1]-J[2-138/1]-B[3-60/1]
MTSBRD32-[200-1200/1]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-175/1]-E[6-24/1]-C[5-60/1]-J[2-173/1]-B0
MTSBRD32-[200-1200/1]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-175/1]-E[6-24/1]-C[5-60/1]-J[2-173/1]-B[3-75/1]
MTSBRD36-[200-1200/1]-T[2-175/1]-Q[17,​20,​25]-S[2-175/1]-E[6-24/1]-C[5-60/1]-J[2-173/1]-B0
MTSBRD36-[200-1200/1]-T[2-175/1]-Q[17,​20,​25]-S[2-175/1]-E[6-24/1]-C[5-60/1]-J[2-173/1]-B[3-75/1]
MTSBRD40-[200-1200/1]-T[2-210/1]-Q[20,​25,​30]-S[2-210/1]-E[6-29/1]-C[5-60/1]-J[2-208/1]-B0
MTSBRD40-[200-1200/1]-T[2-210/1]-Q[20,​25,​30]-S[2-210/1]-E[6-29/1]-C[5-60/1]-J[2-208/1]-B[3-90/1]
MTSBRD50-[200-1200/1]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-280/1]-E[6-39/1]-C[5-60/1]-J[2-278/1]-B0
MTSBRD50-[200-1200/1]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-280/1]-E[6-39/1]-C[5-60/1]-J[2-278/1]-B[3-120/1]
MTSRC12-[80-1000/1]-T[2-45/1]-Q[7,​8,​9]-S[2-40/1]-E[4-8/1]
MTSRC14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-45/1]-E[4-9/1]
MTSRC16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-77/1]-E[5-11/1]
MTSRC18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-77/1]-E[5-11/1]
MTSRC20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-98/1]-E[5-14/1]
MTSRC22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-98/1]-E[5-14/1]
MTSRC25-[150-1200/1]-T[2-119/1]-Q[12,​14,​15,​16,​17]-S[2-112/1]-E[6-16/1]
MTSRC28-[150-1200/1]-T[2-140/1]-Q[14,​15,​16,​17,​20]-S[2-133/1]-E[7-19/1]
MTSRC32-[200-1200/1]-T[2-175/1]-Q[14,​15,​16,​17,​20,​25]-S[2-168/1]-E[7-24/1]
MTSRC36-[200-1200/1]-T[2-175/1]-Q[17,​20,​25]-S[2-168/1]-E[9-24/1]
MTSRC40-[200-1200/1]-T[2-210/1]-Q[20,​25,​30]-S[2-203/1]-E[10-29/1]
MTSRC50-[200-1200/1]-T[2-280/1]-Q[25,​30,​35,​40]-S[2-273/1]-E[13-39/1]
MTSRD12-[80-1000/1]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[6-8/1]-C[3-60/1]-J[2-61/1]-B0
MTSRD12-[80-1000/1]-T[2-63/1]-Q[7,​8,​9]-S[2-63/1]-E[6-8/1]-C[3-60/1]-J[2-61/1]-B[3-24/1]
MTSRD14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[6-9/1]-C[4-60/1]-J[2-68/1]-B0
MTSRD14-[80-1000/1]-T[2-70/1]-Q[8,​9,​10]-S[2-70/1]-E[6-9/1]-C[4-60/1]-J[2-68/1]-B[3-30/1]
MTSRD16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B0
MTSRD16-[100-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B[3-36/1]
MTSRD18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B0
MTSRD18-[150-1200/1]-T[2-84/1]-Q[9,​10,​12]-S[2-84/1]-E[6-11/1]-C[4-60/1]-J[2-82/1]-B[3-36/1]
MTSRD20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B0
MTSRD20-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B[3-45/1]
MTSRD22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B0
MTSRD22-[150-1200/1]-T[2-105/1]-Q[10,​12,​14,​15]-S[2-105/1]-E[6-14/1]-C[4-60/1]-J[2-103/1]-B[3-45/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSScrew Turn Direction Material Surface Treatment Thread Nominal D
(φ) 		Pitch
(mm) 		Shaft Overall Length L
(mm) 		B
(mm) 		C
(mm) 		E
(mm) 		J
(mm) 		Q
(mm) 		S
(mm) 		T
(mm)

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide12280 ～ 1000--4 ～ 8-7 ～ 92 ～ 402 ～ 45

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide14380 ～ 1000--4 ～ 9-8 ～ 102 ～ 452 ～ 70

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide163100 ～ 1200--5 ～ 11-9 ～ 122 ～ 772 ～ 84

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide184150 ～ 1200--5 ～ 11-9 ～ 122 ～ 772 ～ 84

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide204150 ～ 1200--5 ～ 14-10 ～ 152 ～ 982 ～ 105

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide225150 ～ 1200--5 ～ 14-10 ～ 152 ～ 982 ～ 105

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide255150 ～ 1200--6 ～ 16-12 ～ 172 ～ 1122 ～ 119

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide285150 ～ 1200--7 ～ 19-14 ～ 202 ～ 1332 ～ 140

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide326200 ～ 1200--7 ～ 24-14 ～ 252 ～ 1682 ～ 175

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide366200 ～ 1200--9 ～ 24-17 ～ 252 ～ 1682 ～ 175

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide406200 ～ 1200--10 ～ 29-20 ～ 302 ～ 2032 ～ 210

-

1 18 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Black Oxide508200 ～ 1200--13 ～ 39-25 ～ 402 ～ 2732 ～ 280

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide12280 ～ 100003 ～ 606 ～ 80 ～ 617 ～ 92 ～ 632 ～ 63

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide12280 ～ 10003 ～ 243 ～ 606 ～ 80 ～ 617 ～ 92 ～ 632 ～ 63

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide14380 ～ 100004 ～ 606 ～ 90 ～ 688 ～ 102 ～ 702 ～ 70

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide14380 ～ 10003 ～ 304 ～ 606 ～ 90 ～ 688 ～ 102 ～ 702 ～ 70

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide163100 ～ 120004 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide163100 ～ 12003 ～ 364 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide184150 ～ 120004 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide184150 ～ 12003 ～ 364 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide204150 ～ 120004 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide204150 ～ 12000 ～ 454 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide225150 ～ 120004 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide225150 ～ 12003 ～ 454 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide255150 ～ 120005 ～ 606 ～ 160 ～ 11712 ～ 172 ～ 1192 ～ 119

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide255150 ～ 12003 ～ 515 ～ 606 ～ 160 ～ 11712 ～ 172 ～ 1192 ～ 119

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide285150 ～ 120005 ～ 606 ～ 190 ～ 13814 ～ 202 ～ 1402 ～ 140

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide285150 ～ 12003 ～ 605 ～ 606 ～ 190 ～ 13814 ～ 202 ～ 1402 ～ 140

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide326200 ～ 120005 ～ 606 ～ 240 ～ 17314 ～ 252 ～ 1752 ～ 175

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide326200 ～ 12003 ～ 755 ～ 606 ～ 240 ～ 17314 ～ 252 ～ 1752 ～ 175

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide366200 ～ 120005 ～ 606 ～ 240 ～ 17317 ～ 252 ～ 1752 ～ 175

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide366200 ～ 12003 ～ 755 ～ 606 ～ 240 ～ 17317 ～ 252 ～ 1752 ～ 175

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide406200 ～ 120005 ～ 606 ～ 290 ～ 20820 ～ 302 ～ 2102 ～ 210

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide406200 ～ 12003 ～ 905 ～ 606 ～ 290 ～ 20820 ～ 302 ～ 2102 ～ 210

-

1 18 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide508200 ～ 120005 ～ 606 ～ 390 ～ 27825 ～ 402 ～ 2802 ～ 280

-

1 18 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Black Oxide508200 ～ 12003 ～ 1205 ～ 606 ～ 390 ～ 27825 ～ 402 ～ 2802 ～ 280

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided12280 ～ 1000--4 ～ 8-7 ～ 92 ～ 402 ～ 45

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided14380 ～ 1000--4 ～ 9-8 ～ 102 ～ 452 ～ 70

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided163100 ～ 1200--5 ～ 11-9 ～ 122 ～ 772 ～ 84

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided184150 ～ 1200--5 ～ 11-9 ～ 122 ～ 772 ～ 84

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided204150 ～ 1200--5 ～ 14-10 ～ 152 ～ 982 ～ 105

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided225150 ～ 1200--5 ～ 14-10 ～ 152 ～ 982 ～ 105

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided255150 ～ 1200--6 ～ 16-12 ～ 172 ～ 1122 ～ 119

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided285150 ～ 1200--7 ～ 19-14 ～ 202 ～ 1332 ～ 140

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided326200 ～ 1200--7 ～ 24-14 ～ 252 ～ 1682 ～ 175

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided366200 ～ 1200--9 ～ 24-17 ～ 252 ～ 1682 ～ 175

-

1 7 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided406200 ～ 1200--10 ～ 29-20 ～ 302 ～ 2032 ～ 210

-

1 18 Days 10[Right Screw] Right-hand ThreadEN 1.1191 Equiv.Not Provided508200 ～ 1200--13 ～ 39-25 ～ 402 ～ 2732 ～ 280

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided12280 ～ 100003 ～ 606 ～ 80 ～ 617 ～ 92 ～ 632 ～ 63

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided12280 ～ 10003 ～ 243 ～ 606 ～ 80 ～ 617 ～ 92 ～ 632 ～ 63

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided14380 ～ 100004 ～ 606 ～ 90 ～ 688 ～ 102 ～ 702 ～ 70

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided14380 ～ 10003 ～ 304 ～ 606 ～ 90 ～ 688 ～ 102 ～ 702 ～ 70

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided163100 ～ 120004 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided163100 ～ 12003 ～ 364 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided184150 ～ 120004 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided184150 ～ 12003 ～ 364 ～ 606 ～ 110 ～ 829 ～ 122 ～ 842 ～ 84

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided204150 ～ 120004 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided204150 ～ 12003 ～ 454 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided225150 ～ 120004 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

-

1 7 Days 10[Right Screw] Right-hand Screw with KeywayEN 1.1191 Equiv.Not Provided225150 ～ 12003 ～ 454 ～ 606 ～ 140 ～ 10310 ～ 152 ～ 1052 ～ 105

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Axis shape One End Double Stepped Type Type Lead Screw Shafts Type of axis Rolled

Configure

Clear all

107Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Screw Turn Direction

    • Right Screw
      • Right-hand Screw with Keyway
      • Right-hand Thread

    Clear

  • Material

    • EN 1.1191 Equiv.
    • EN 1.4305 Equiv.

    Clear

  • Surface Treatment

    • Not Provided
    • LTBC Plating
    • Black Oxide

    Clear

  • Thread Nominal D(φ)

    • 12
    • 14
    • 16
    • 18
    • 20
    • 22
    • 25
    • 28
    • 32
    • 36
    • 40
    • 50

    Clear

  • Pitch(mm)

    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Shaft Overall Length L(mm)

     [80-1200/1mm Unit(s)]

    Clear

  • B(mm)

    • 0

     [0-120/1mm Unit(s)]

    Clear

  • C(mm)

     [3-60/1mm Unit(s)]

    Clear

  • E(mm)

     [4-39/1mm Unit(s)]

    Clear

  • J(mm)

     [2-278/1mm Unit(s)]

    Clear

  • Q(mm)

    • 7
    • 8
    • 9
    • 10
    • 12
    • 14
    • 15
    • 16
    • 17
    • 20
    • 25
    • 30
    • 35
    • 40

    Clear

  • S(mm)

     [2-280/1mm Unit(s)]

    Clear

  • T(mm)

     [2-280/1mm Unit(s)]

    Clear

  • Type

    • MTSBRC
    • MTSBRD
    • MTSRC
    • MTSRD
    • MTSTRC
    • RMTSRC
    • RMTSRD

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 12 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.