• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Components / Stepped and Threaded for Straight Pins / Shouldered

Bushings for Inspection Components / Stepped and Threaded for Straight Pins / Shouldered

MISUMI

MISUMI

[Features] Bush which can be used in combination with a straight bolt with stepped external thread.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

[ ! ]1

[ ! ]2

[ ! ]2

■Shouldered (Round)

■Shouldered (Dowel Pin)

PH7
3.00+0.010
0
3.01 to 6.00+0.012
0
6.01 to 10.00+0.015
0
10.01 to 18.00+0.018
0
18.01 to 23.00+0.021
0
Dp6
8+0.024
+0.015
10
12+0.029
+0.018
16
20+0.035
+0.022
25
Dimension Tolerance of L and B
Dimension Range
Tolerance
(㎜)
Over
or less
0.5
3
±0.1
3
6
±0.1
6
30
±0.2
[ ! ]Compliant with JIS B 0405 Class m
(intermediate).
[!] 1. Press Fit Type has a 1 to 3 mm guide part (D - 0.03/ - 0.05).
[!] 2. When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5. [!] 3. No R for L ≤ 4. [!] 4. When P = M, I.D. of P dimension will have thread runout.
[!] For hole machining, please note that inner diameter shrinkage of press fit type is relatively large
[!] There is a relief groove for grinding on the bottom of the P dimension.
[M] Material[H] HardnessFixing MethodO.D. ToleranceType
RoundDowel Pin
P+0.03
+0.01		PH7P+0.03
+0.01		PH7
JIS−SKS93 Equivalent50 to 60HRCStandardD0
−0.02		KJBMTKJBHMTKJBKMTKJBKHMT
Press FitDp6KJBPMTKJBPHMT--
EN 1.4301 Equiv.[!]6-StandardD0
−0.02		KJBMTSKJBHMTS--
Press FitDp6KJBPMTSKJBPHMTS--
EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRCStandardD0
−0.02		KJBMTCKJBHMTC--

Specification Table

Part Number—P—M—L—B—T
   
Type D
KJBMT 12—P8.00—M5—L10—B10—T2
Part NumberPM (P ≥ M)LBTHR
TypeD
Shouldered
RoundDowel Pin
P+0.03
+0.01		PH7P+0.03
+0.01		PH70.01 mm IncrementsSelection1 mm Increments1 mm IncrementsSelection
KJBMTKJBHMTKJBKMTKJBKHMT8 3.00 to 6.0034   0
When L = 0,
specify P = 0.
3 to 25
When P ≤ 3.59
L ≤ P × 2.5
When P ≥ 3.6
L ≤ P × 3		5 to 25
(M ≤ B ≤ M × 3)
When using M3
(M ≤ B ≤ M × 2)		2
3
5		D+41.0
KJBPMTKJBPHMT  10 4.00 to 8.004568 D+42.0
    12 4.00 to 10.00456810D+42.0
KJBMTSKJBHMTS  16 8.00 to 14.005681012D+42.0
KJBPMTSKJBPHMTS  2010.00 to 18.005681012D+42.0
KJBMTCKJBHMTC  2515.00 to 23.005681012D+42.0
[ ! ] 6. For EN 1.4301 Equiv., there must be a 2 mm or greater wall thickness [(D - P)/2 ≥ 2].

Alterations

Part Number—P—M—L—B—T—(FC·NC, etc.)
KJBM12—P8.00—M5—L10—B10  —FC
AlterationsCodeSpec.
Groove Alterations
(for Adhesive Reservoir)		FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + B ≥ 10 for Straight Type,
L + B ≥ 15 for Shouldered Type

[NG] Combination with alteration NC is not available
Groove Alterations
(For retaining)		NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + B ≥ 10 for Straight Type,
L + B ≥ 15 for Shouldered Type

[NG] Combination with alteration FC is not available
AlterationsCodeSpec.
Bore I.D. R
C Chamfered		RNAdds C Chamfering (0.5 or less) to R.
Bore I.D. R
Square Corner		CRNReplaces R with square corner.
[ ! ] Edge may be burred.
[NG] Combination with TKC is not available
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating).
　

Shoulder Thickness ToleranceTKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered Type only
[NG] Combination with alteration CRN is not available
Flats
Machining		HTAdds a flat on bushing.
[ ! ] Applicable to Round Type only
[ ! ] No flat on shoulder part.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KJBHMT8-P0-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMT8-P0-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT8-P0-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
KJBHMT8-P0-M[3,​4]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT8-P[3-6/0.01]-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMT8-P[3-6/0.01]-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT8-P[3-6/0.01]-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
KJBHMT8-P[3-6/0.01]-M[3,​4]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT10-P0-M[4,​5,​6,​8]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT10-P0-M[4,​5,​6,​8]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT10-P[4-8/0.01]-M[4,​5,​6,​8]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT10-P[4-8/0.01]-M[4,​5,​6,​8]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT12-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT12-P0-M[4,​5,​6,​8,​10]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT12-P[4-10/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT12-P[4-10/0.01]-M[4,​5,​6,​8,​10]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT16-P[8-14/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT20-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT20-P0-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT25-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT25-P0-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMT25-P[15-23/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMT25-P[15-23/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC8-P0-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMTC8-P0-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC8-P0-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
KJBHMTC8-P0-M[3,​4]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC8-P[3-6/0.01]-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMTC8-P[3-6/0.01]-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC8-P[3-6/0.01]-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
KJBHMTC8-P[3-6/0.01]-M[3,​4]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC10-P0-M[4,​5,​6,​8]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC10-P0-M[4,​5,​6,​8]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC10-P[4-8/0.01]-M[4,​5,​6,​8]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC10-P[4-8/0.01]-M[4,​5,​6,​8]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC12-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC12-P0-M[4,​5,​6,​8,​10]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC12-P[4-10/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC12-P[4-10/0.01]-M[4,​5,​6,​8,​10]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC16-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC16-P0-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC16-P[8-14/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC16-P[8-14/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC20-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC20-P0-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC25-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC25-P0-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTC25-P[15-23/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTC25-P[15-23/0.01]-M[5,​6,​8,​10,​12]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTS8-P0-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMTS8-P0-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTS8-P0-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
KJBHMTS8-P0-M[3,​4]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHMTS8-P[3-6/0.01]-M[3,​4]-L0-B[1,​5,​6]-T[2,​3,​5]
KJBHMTS8-P[3-6/0.01]-M[3,​4]-L0-B[5-25/1]-T[2,​3,​5]
KJBHMTS8-P[3-6/0.01]-M[3,​4]-L[3-25/1]-B[1,​5,​6]-T[2,​3,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBasic Shape Outer Diameter Tolerance Material Hardness Material Hardness Details Type I.D. Tolerance Bushing Dia. D
(Ø) 		I.D. P
(Ø) 		B
(mm) 		L
(mm) 		Screw Dia. Selection (Coarse) [M]
(mm) 		Shoulder Thickness T
(mm)

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7801 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7805 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7801 ～ 63 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7805 ～ 253 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH783 ～ 61 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH783 ～ 65 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH783 ～ 61 ～ 63 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH783 ～ 65 ～ 253 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH71005 ～ 2504 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH71005 ～ 253 ～ 254 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7104 ～ 85 ～ 2504 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7104 ～ 85 ～ 253 ～ 254 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH71205 ～ 2504 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH71205 ～ 253 ～ 254 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7124 ～ 105 ～ 2504 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7124 ～ 105 ～ 253 ～ 254 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH7168 ～ 145 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72005 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72005 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72010 ～ 185 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72010 ～ 185 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72505 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72505 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72515 ～ 235 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardSteelProvidedJIS-SKS9350~60HRCRound with Shoulder Standard TypeH72515 ～ 235 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7801 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7805 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7801 ～ 63 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7805 ～ 253 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH783 ～ 61 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH783 ～ 65 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH783 ～ 61 ～ 63 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH783 ～ 65 ～ 253 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71005 ～ 2504 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71005 ～ 253 ～ 254 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7104 ～ 85 ～ 2504 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7104 ～ 85 ～ 253 ～ 254 ～ 82 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71205 ～ 2504 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71205 ～ 253 ～ 254 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7124 ～ 105 ～ 2504 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7124 ～ 105 ～ 253 ～ 254 ～ 102 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71605 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH71605 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7168 ～ 145 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH7168 ～ 145 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72005 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72005 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72010 ～ 185 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72010 ～ 185 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72505 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72505 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72515 ～ 235 ～ 2505 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelProvidedEN 1.4037 Equiv.45~50HRCRound with Shoulder Standard TypeH72515 ～ 235 ～ 253 ～ 255 ～ 122 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH7801 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH7805 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH7801 ～ 63 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH7805 ～ 253 ～ 253 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH783 ～ 61 ～ 603 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH783 ～ 65 ～ 2503 ～ 42 ～ 5

-

1 9 Days 10ShoulderedStandardStainless SteelNot ProvidedEN 1.4301 Equiv.-Round with Shoulder Standard TypeH783 ～ 61 ～ 63 ～ 253 ～ 42 ～ 5

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Hole Selectable 1-Step Hole Shape Circular Shape With or w/o Tap Tapped
Surface Treatment Not Provided

Configure

Clear all

333Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Basic Shape

    • Straight
    • Shouldered

    Clear

  • Outer Diameter Tolerance

    • Standard
    • Press Fit

    Clear

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Hardness

    • Provided
    • Not Provided

    Clear

  • Material

    • EN 1.4037 Equiv.
    • EN 1.4301 Equiv.
    • JIS-SKS93

    Clear

  • Hardness Details

    • 45~50HRC
    • 50~60HRC

    Clear

  • Type

    • Dowel Pin Anti-rotation with Shoulder Standard Type
    • Round Straight Press Fit Type
    • Round with Shoulder Press Fit Type
    • Round with Shoulder Standard Type

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • I.D. P(Ø)

    • 0

     [3-23/0.01Ø Unit(s)]

    Clear

  • B(mm)

    • 1
    • 5
    • 6

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

    • 0

     [3-25/1mm Unit(s)]

    Clear

  • Screw Dia. Selection (Coarse) [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Shoulder Thickness T(mm)

    • 2
    • 3
    • 5

    Clear

  • Type

    • KJBHMT
    • KJBHMTC
    • KJBHMTS
    • KJBKHMT
    • KJBKMT
    • KJBMT
    • KJBMTC
    • KJBMTS
    • KJBPHMT
    • KJBPHMTS
    • KJBPMT
    • KJBPMTS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.