Bushings for Inspection Components / Stepped and Threaded for Taper Pins
[Features] Socket that can be used in combination with a tapered pin with stepped external thread.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Dimensional Drawing
[ ! ]1
[ ! ]2
[ ! ]2
[ ! ]3
[ ! ]3
■Straight (Round)
■Straight (Dowel Pin) [!] 4
| S | H7 |
| 3 | +0.010 0 |
| 4 to 6 | +0.012 0 |
| 7 to 10 | +0.015 0 |
| 11 to 18 | +0.018 0 |
| 19 | +0.021 0 |
| D | p6 |
| 8 | +0.024 +0.015 |
| 10 | |
| 12 | +0.029 +0.018 |
| 16 | |
| 20 | +0.035 +0.022 |
| 25 |
Dimension Tolerance of L, L1, and B
[ ! ]Compliant with JIS B 0405 Class m
(intermediate).
Dimension Range | Tolerance (㎜) | |
Over | or less | |
| 0.5 | 3 | ±0.1 |
| 3 | 6 | ±0.1 |
| 6 | 30 | ±0.2 |
(intermediate).
[!] 1. Press Fit Type has a 1 to 3 mm guide part (D - 0.03/ - 0.05).
[!] 2. When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5. [!] 3. When S = M, I.D. of S dimension will have thread runout.
[!] For hole machining, please note that inner diameter shrinkage of press fit type is relatively large
[!] 2. When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5. [!] 3. When S = M, I.D. of S dimension will have thread runout.
[!] For hole machining, please note that inner diameter shrinkage of press fit type is relatively large
| [M] Material | [H] Hardness | [S] Surface Treatment | Fixing Method | O.D. Tolerance | Type | ||
| Round | Dowel Pin | ||||||
| S+0.03 +0.01 | SH7 | S+0.03 +0.01 | |||||
| JIS−SKS93 Equivalent | 50 to 60HRC | — | Standard | D0 −0.02 | KJBW | KJBHW | KJBKW |
| Press Fit | Dp6 | KJBPW | KJBPHW | — | |||
| JIS−SKS93 Equivalent | 50 to 60HRC | Electroless Nickel Plating | Standard | D0 −0.02 | KJBWM | KJBHWM | — |
Specification Table
| Part Number | — | P | — | S | — | M | — | L | — | L1 | — | B | ||
| Type | D | |||||||||||||
| KJBW | 10 | — | P8.00 | — | S5 | — | M4 | — | L8 | — | 4 | — | B10 | |
| Part Number | P | S (S ≤ P-1) | M | L | L1 | B | R | Specifications | ||||||||||||
| Type | D | Round | Dowel Pin | |||||||||||||||||
| Straight | S+0.03 +0.01 | SH7 | S+0.03 +0.01 | |||||||||||||||||
| Round | Dowel Pin | KJBW KJBPW | KJBWM | KJBHW KJBPHW | KJBHWM | KJBKW | ||||||||||||||
| S+0.03 +0.01 | SH7 | S+0.03 +0.01 | 0.01 mm Increments | 1 mm Increments | Selection | 1 mm Increments | 1 mm Increments | 1 mm Increments | ||||||||||||
| KJBW | KJBHW | KJBKW | 8 | 4.00 to 6.00 | 3 to 5 | 3 | 4 | 3 to 25 (L ≤ P × 2.5) | 3 to 25 (L+L1 ≤ S × 2.5) | 5 to 25 (M ≤ B ≤ M × 3) For M3 (D8) (M ≤ B ≤ M × 2) When S = M L1+B ≤ M × 3 | 1.0 | ● | ● | ● | ● | — | ||||
| 10 | 5.00 to 8.00 | 4 to 7 | 4 | 5 | 6 | 3 to 25 (L ≤ P × 3) No R for 3, 4 | 3 ≤ L1 < 25−L (L+L1 ≤ S × 3) | 2.0 | ● | ● | ● | ● | — | |||||||
| KJBPW | KJBPHW | 12 | 5.00 to 10.00 | 4 to 9 | 4 | 5 | 6 | 8 | 2.0 | ● | ● | ● | ● | ● | ||||||
| 16 | 8.00 to 14.00 | 4 to 13 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||||
| KJBWM | KJBHWM | 20 | 10.00 to 18.00 | 6 to 17 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||
| 25 | 15.00 to 23.00 | 8 to 19 | 4 | 5 | 6 | 8 | 10 | 12 | 2.0 | ● | ● | ● | ● | ● | ||||||
Alterations
| Part Number | — | P | — | S | — | M | — | L | — | L1 | — | B | — | T | — | (FC·PKC·NC, etc.) |
| KJBW12 | — | P8.00 | — | S6 | — | M5 | — | L10 | — | 4 | — | B10 | — | FC |
| Alterations | Code | Spec. | |
| Groove Alterations (for Adhesive Reservoir) |  | FC | Adds an adhesive reservoir groove. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable when L + L1 + B ≥ 10 for Straight Type, |
| Groove Alterations (For retaining) |  | NC | Adds groove for retaining. " ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more. [ ! ] Applicable when L + L1 + B ≥ 10 for Straight Type, |
| Bore I.D. R C Chamfered |  | RN | Adds C Chamfering (0.5 or less) to R. |
| Alterations | Code | Spec. | |
| Bore I.D. R Square Corner |  | CRN | Replaces R with square corner. [ ! ] Edge may be burred. [NG] Combination with TKC is not available |
| Additional Surface Treatment (Black Oxide) | STC | Adds black oxide surface treatment. [ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating). | |
| P Dimension Tolerance |  | PKC | Changes P dimension tolerance to H7. |
| Shoulder Thickness Tolerance |  | TKC | Changes shoulder thickness tolerance to ±0.01. [ ! ] Applicable to Shouldered Type only [NG] Combination with alteration CRN is not available |
| Flats Machining |  | HT | Adds a flat on bushing. [ ! ] Applicable to Round Type only [ ! ] No flat on shoulder part. |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | RoHS | Outer Diameter Tolerance | Surface Treatment | Type | I.D. Tolerance | Bushing Dia. D (Ø) | I.D. P (Ø) | B (mm) | L (mm) | L1 (mm) | S (mm) | Screw Dia. Selection (Coarse) [M] (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | H7 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 7 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | H7 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 7 Days | 10 | Standard | Not Provided | Dowel Pin Anti-rotation Straight Standard Type | +0.03/+0.01 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Dowel Pin Anti-rotation Straight Standard Type | +0.03/+0.01 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Dowel Pin Anti-rotation Straight Standard Type | +0.03/+0.01 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Dowel Pin Anti-rotation Straight Standard Type | +0.03/+0.01 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Dowel Pin Anti-rotation Straight Standard Type | +0.03/+0.01 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | H7 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Press Fit | Not Provided | Round Straight Press Fit Type | +0.03/+0.01 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Not Provided | Round, Straight, Standard Type | +0.03/+0.01 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 8 | 4 ～ 6 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 3 ～ 5 | 3 ～ 4 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 10 | 5 ～ 8 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 7 | 4 ～ 6 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 12 | 5 ～ 10 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 9 | 4 ～ 8 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 16 | 8 ～ 14 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 4 ～ 13 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 20 | 10 ～ 18 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 6 ～ 17 | 4 ～ 12 | ||
| 1 | 9 Days | 10 | Standard | Electroless Nickel Plating | Round, Straight, Standard Type | +0.03/+0.01 | 25 | 15 ～ 23 | 5 ～ 25 | 3 ～ 25 | 3 ～ 22 | 8 ～ 19 | 4 ～ 12 |
Loading...
Basic information
| Basic Shape | Straight | Hole Selectable | 2-Step | Hole Shape | Circular Shape |
|---|---|---|---|---|---|
| With or w/o Tap | Tapped | Material | Steel | Hardness | Provided |
| Material | JIS-SKS93 | Hardness Details | 50~60HRC |
Configure
Basic Attributes
-
Outer Diameter Tolerance
- Standard
- Press Fit
-
Surface Treatment
- Not Provided
- Electroless Nickel Plating
-
Type
- Dowel Pin Anti-rotation Straight Standard Type
- Round Straight Press Fit Type
- Round, Straight, Standard Type
-
I.D. Tolerance
- +0.03/+0.01
- H7
-
Bushing Dia. D(Ø)
- 8
- 10
- 12
- 16
- 20
- 25
-
I.D. P(Ø)
-
B(mm)
-
L(mm)
-
L1(mm)
-
S(mm)
-
Screw Dia. Selection (Coarse) [M](mm)
-
Type
- KJBHW
- KJBHWM
- KJBKW
- KJBPHW
- KJBPW
- KJBW
- KJBWM
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
stopper bolts / hexagon socket at head / regular thread / hard rubber protective head / stainless steel / A57
MISUMI Standard Price : 14.01 € Shipping Days: Same day
![[Precision] X-Axis / Cross Roller](http://content.misumi-ec.com/image/upload/f_auto,t_product_recommend_a/v1/p/jp/product/series/110300196460/110300196460_001.jpg)
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.