• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Components / Stepped and Threaded for Taper Pins / Shouldered

Bushings for Inspection Components / Stepped and Threaded for Taper Pins / Shouldered

MISUMI

MISUMI

[Features] Bushing that can be used in combination with a tapered pin with stepped male thread.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

[ ! ]1

[ ! ]2

[ ! ]2

[ ! ]3

[ ! ]3

■Shouldered (Round)

■Shouldered (Dowel Pin)

SH7
3+0.010
0
4 to 6+0.012
0
7 to 10+0.015
0
11 to 18+0.018
0
19+0.021
0
Dp6
8+0.024
+0.015
10
12+0.029
+0.018
16
20+0.035
+0.022
25
Dimension Tolerance of L, L1, and B
Dimension Range
Tolerance
(㎜)
Over
or less
0.53±0.1
36±0.1
630±0.2
[ ! ]Compliant with JIS B 0405 Class m
(intermediate).
[!] 1. Press Fit Type has a 1 to 3 mm guide part (D - 0.03/ - 0.05).
[!] 2. When wall is 2 mm or less ((D - P)/2 ≤ 2), R is 0.5. [!] 3. When S = M, I.D. of S dimension will have thread runout.
[!] For hole machining, please note that inner diameter shrinkage of press fit type is relatively large
[M] Material[H] HardnessFixing MethodO.D. ToleranceType
RoundDowel Pin
S+0.03
+0.01		SH7S+0.03
+0.01		SH7
JIS−SKS93 Equivalent50 to 60HRCStandardD0
−0.02		KJBTWKJBHTWKJBKTWKJBKHTW
Press FitDp6KJBPTWKJBPHTW——

Specification Table

Part Number—P—S—M—L—L1—B—T
   
Type D
KJBTW 10—P8.00—S5—M4—L8—4—B10—T2
Part NumberPS (S ≤ P-1)MLL1BTHR
TypeD
Shouldered
RoundDowel Pin
S+0.03
+0.01		SH7S+0.03
+0.01		SH70.01 mm Increments1 mm IncrementsSelection1 mm Increments1 mm Increments1 mm IncrementsSelection
KJBTWKJBHTWKJBKTWKJBKHTW8 4.00 to 6.003 to 534    3 to 25
(L ≤ P × 2.5)		3 to 25
(L+L1 ≤ S × 2.5)		5 to 25
(M ≤ B ≤ M × 3)
For M3 (D8)
(M ≤ B ≤ M × 2)
When S = M
L1+B ≤ M × 3		2
3
5		D+41.0
10 5.00 to 8.004 to 7456   3 to 25
(L ≤ P × 3)
No R for 3, 4		3 ≤ L1 < 25−L
(L+L1 ≤ S × 3)		D+42.0
KJBPTWKJBPHTW  12 5.00 to 10.004 to 94568  D+42.0
16 8.00 to 14.004 to 1345681012D+42.0
    2010.00 to 18.006 to 1745681012D+42.0
2515.00 to 23.008 to 1945681012D+42.0

Alterations

Part Number—P—S—M—L—L1—B—T—(FC·PKC·NC, etc.)
KJBW12—P8.00—S6—M5—L10—4—B10  —FC
AlterationsCodeSpec.
Groove Alterations
(for Adhesive Reservoir)		FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + L1 + B ≥ 10 for Straight Type,
L + L1 + B ≥ 15 for Shouldered Type

[NG] Combination with alteration NC is not available
Groove Alterations
(For retaining)		NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + L1 + B ≥ 10 for Straight Type,
L + L1 + B ≥ 15 for Shouldered Type

[NG] Combination with alteration FC is not available
Bore I.D. R
C Chamfered		RNAdds C Chamfering (0.5 or less) to R.
AlterationsCodeSpec.
Bore I.D. R
Square Corner		CRNReplaces R with square corner.
[ ! ] Edge may be burred.
[NG] Combination with TKC is not available
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating).
　

P Dimension TolerancePKCChanges P dimension tolerance to H7.
Shoulder Thickness ToleranceTKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered Type only
[NG] Combination with alteration CRN is not available
Flats
Machining		HTAdds a flat on bushing.
[ ! ] Applicable to Round Type only
[ ! ] No flat on shoulder part.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJBHTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBHTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBHTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBHTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBHTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBHTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKHTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBKTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPHTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBPTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW8-P[4-6/0.01]-S[3-5/1]-M[3,​4]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW10-P[5-8/0.01]-S[4-7/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW12-P[5-10/0.01]-S[4-9/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW16-P[8-14/0.01]-S[4-13/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW20-P[10-18/0.01]-S[6-17/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
KJBTW25-P[15-23/0.01]-S[8-19/1]-M[4,​5,​6,​8,​10,​12]-L[3-25/1]-[3-22/1]-B[5-25/1]-T[2,​3,​5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSOuter Diameter Tolerance Type I.D. Tolerance Bushing Dia. D
(Ø) 		I.D. P
(Ø) 		B
(mm) 		L
(mm) 		L1
(mm) 		S
(mm) 		Screw Dia. Selection (Coarse) [M]
(mm) 		Shoulder Thickness T
(mm)
1 9 Days 10StandardRound with Shoulder Standard TypeH784 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10StandardRound with Shoulder Standard TypeH7105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard TypeH7125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard TypeH7168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard TypeH72010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard TypeH72515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH784 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH7105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 62 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH7125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 82 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH7168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH72010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard TypeH72515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.0184 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.01105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 62 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.01125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 82 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.01168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.012010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10StandardDowel Pin Anti-rotation with Shoulder Standard Type+0.03/+0.012515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH784 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH7105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 62 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH7125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 82 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH7168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH72010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit TypeH72515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.0184 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.01105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 62 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.01125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 82 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.01168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.012010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10Press FitRound with Shoulder Press Fit Type+0.03/+0.012515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.0184 ～ 65 ～ 253 ～ 253 ～ 223 ～ 53 ～ 42 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.01105 ～ 85 ～ 253 ～ 253 ～ 224 ～ 74 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.01125 ～ 105 ～ 253 ～ 253 ～ 224 ～ 94 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.01168 ～ 145 ～ 253 ～ 253 ～ 224 ～ 134 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.012010 ～ 185 ～ 253 ～ 253 ～ 226 ～ 174 ～ 122 ～ 5
1 9 Days 10StandardRound with Shoulder Standard Type+0.03/+0.012515 ～ 235 ～ 253 ～ 253 ～ 228 ～ 194 ～ 122 ～ 5

Loading...

  1. 1
 

Basic information

Basic Shape Shouldered Hole Selectable 2-Step Hole Shape Circular Shape
With or w/o Tap Tapped Material Steel Surface Treatment Not Provided
Hardness Provided Material JIS-SKS93 Hardness Details 50~60HRC

Configure

Clear all

36Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Outer Diameter Tolerance

    • Standard
    • Press Fit

    Clear

  • Type

    • Dowel Pin Anti-rotation with Shoulder Standard Type
    • Round with Shoulder Press Fit Type
    • Round with Shoulder Standard Type

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • I.D. P(Ø)

     [4-23/0.01Ø Unit(s)]

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [3-25/1mm Unit(s)]

    Clear

  • L1(mm)

     [3-22/1mm Unit(s)]

    Clear

  • S(mm)

     [3-19/1mm Unit(s)]

    Clear

  • Screw Dia. Selection (Coarse) [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Shoulder Thickness T(mm)

    • 2
    • 3
    • 5

    Clear

  • Type

    • KJBHTW
    • KJBKHTW
    • KJBKTW
    • KJBPHTW
    • KJBPTW
    • KJBTW

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.