• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Components / D-Shape / Shouldered

Bushings for Inspection Components / D-Shape / Shouldered

MISUMI

MISUMI

[Features] Bushing which can be used in combination with a stepped dowel pin.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

■Shouldered

[M] Material[H] Hardness[S] Surface TreatmentType
P+0.03
+0.01F+0.05
       0		PH7F+0.03
       0
JIS−SKS93 Equivalent50 to 60HRC-KJBSTKKJBHSTK
JIS−SKS93 Equivalent50 to 60HRCElectroless Nickel Plating——
EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRC-KJBSTKCKJBHSTKC

Specification Table

Part Number—P—F—L—T
KJBSTK12—P8.00—F3.0—L10—T3
PH7
3.00+0.010
0
3.01 to 6.00+0.012
0
6.01 to 10.00+0.015
0
10.01 to 18.00+0.018
0
18.01 to 21.00+0.021
0
Part NumberP
0.01 mm Increments		F (F < P/2)
0.1 mm Increments		L
1 mm Increments		T
Selection		H
TypeD
Shouldered
P+0.03
+0.01F+0.05
       0		PH7F+0.03
       0
KJBSTK





KJBSTKC		KJBHSTK





KJBHSTKC		83.00 to 5.000.3 to 2.45 to 252 3 5
T ≤ L-2		D+4
103.00 to 7.000.3 to 3.0D+4
123.00 to 9.000.5 to 4.0D+4
164.00 to 13.000.5 to 6.0D+4
206.00 to 17.001.0 to 8.0D+4
258.00 to 21.002.0 to 10.0D+4

Alterations

Part Number—P—F—L—T—(FC·NC ... etc.)
KJBSK12—P8.00—F2.0—L10  —FC
AlterationsCodeSpec.
Groove (for Adhesive Reservoir)
FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 10 for Straight Type,
L ≥ 15 for Shouldered Type

[NG] Combination with alteration NC is not available
Groove (for Retaining)
NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable only when L ≥ 10 for Straight Type,
L ≥ 15 for Shouldered Type

[NG] Combination with alteration FC is not available
AlterationsCodeSpec.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating).
　

Shoulder Thickness Tolerance
TKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered Type only
[NG] Combination with alteration LKC is not available
L Dimension Tolerance
LKCChanges L dimension tolerance to 0 -0.05.
[NG] Combination with TKC is not available

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJBHSTK8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTK10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTK12-P[3-9/0.01]-F[0.1-4/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTK16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTK20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTK25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC12-P[3-9/0.01]-F[0.5-4/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,​3,​5]
KJBHSTKC25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK12-P[3-9/0.01]-F[0.1-4/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTK25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC8-P[3-5/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC10-P[3-7/0.01]-F[0.3-3/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC12-P[3-9/0.01]-F[0.5-4/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC16-P[4-13/0.01]-F[0.5-6/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC20-P[6-17/0.01]-F[1-8/0.1]-L[5-25/1]-T[2,​3,​5]
KJBSTKC25-P[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-T[2,​3,​5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Material Hardness Details I.D. Tolerance Bushing Dia. D
(Ø) 		I.D. P
(Ø) 		Overall Length L
(mm) 		F
(mm) 		Shoulder Thickness T
(mm)
1 9 Days 10SteelJIS-SKS9350~60HRCH783 ～ 55 ～ 250.3 ～ 32 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRCH7103 ～ 75 ～ 250.3 ～ 32 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRCH7123 ～ 95 ～ 250.1 ～ 42 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRCH7164 ～ 135 ～ 250.5 ～ 62 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRCH7206 ～ 175 ～ 251 ～ 82 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRCH7258 ～ 215 ～ 252 ～ 102 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH783 ～ 55 ～ 250.3 ～ 32 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH7103 ～ 75 ～ 250.3 ～ 32 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH7123 ～ 95 ～ 250.5 ～ 42 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH7164 ～ 135 ～ 250.5 ～ 62 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH7206 ～ 175 ～ 251 ～ 82 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRCH7258 ～ 215 ～ 252 ～ 102 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.0183 ～ 55 ～ 250.3 ～ 32 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.01103 ～ 75 ～ 250.3 ～ 32 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.01123 ～ 95 ～ 250.1 ～ 42 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.01164 ～ 135 ～ 250.5 ～ 62 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.01206 ～ 175 ～ 251 ～ 82 ～ 5
1 9 Days 10SteelJIS-SKS9350~60HRC+0.03/+0.01258 ～ 215 ～ 252 ～ 102 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.0183 ～ 55 ～ 250.3 ～ 32 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.01103 ～ 75 ～ 250.3 ～ 32 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.01123 ～ 95 ～ 250.5 ～ 42 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.01164 ～ 135 ～ 250.5 ～ 62 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.01206 ～ 175 ～ 251 ～ 82 ～ 5
1 9 Days 10Stainless SteelEN 1.4037 Equiv.45~50HRC+0.03/+0.01258 ～ 215 ～ 252 ～ 102 ～ 5

Loading...

  1. 1
 

Basic information

Basic Shape Shouldered Hole Selectable Straight Hole Shape D Cut (D-Shape)
With or w/o Tap Not Tapped Outer Diameter Tolerance Standard Surface Treatment Not Provided
Hardness Provided Type Shouldered Type

Configure

Clear all

24Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Material

    • EN 1.4037 Equiv.
    • JIS-SKS93

    Clear

  • Hardness Details

    • 45~50HRC
    • 50~60HRC

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • I.D. P(Ø)

     [3-21/0.01Ø Unit(s)]

    Clear

  • Overall Length L(mm)

     [5-25/1mm Unit(s)]

    Clear

  • F(mm)

     [0.1-10/0.1mm Unit(s)]

    Clear

  • Shoulder Thickness T(mm)

    • 2
    • 3
    • 5

    Clear

  • Type

    • KJBHSTK
    • KJBHSTKC
    • KJBSTK
    • KJBSTKC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.