• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Components / Oval / Shouldered

Bushings for Inspection Components / Oval / Shouldered

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Bushing for Inspection Components - Oval Shape, With Shoulder: Related Image

[ ! ]1

[ ! ]2

■Shouldered (Dowel Pin)

■Shouldered (D Cut)

[M] Material[H] HardnessType
Dowel PinD Cut
P+0.03
+0.01
W+0.03
+0.01		PH7WH7P+0.03
+0.01
W+0.03
+0.01		PH7WH7
JIS−SKS93 Equivalent50 to 60HRCKJBSTCKJBHSTCKJBSTCDKJBHSTCD
EN 1.4301 Equiv.—KJBSTCSKJBHSTCS——
EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRCKJBSTCCKJBHSTCCKJBSTCDCKJBHSTCDC

Specification Table

Part Number P—W—L—T
   —
Type D 
KJBSTC 12—P9.50—W4.50 —L15—T2
P, WH7
3.00+0.010
0
3.01 to 6.00+0.012
0
6.01 to 10.00+0.015
0
10.01 to 18.00+0.018
0
18.01 to 27.00+0.021
0
[!] Some combinations are unavailable.
Part NumberP
0.01 mm Increments		W
0.01 mm Increments		L
1 mm Increments		RT
Selection		H
TypeD
Shouldered
Dowel PinD Cut
P+0.03
+0.01
W+0.03
+0.01		PH7WH7P+0.03
+0.01
W+0.03
+0.01		PH7WH7
KJBSTC

KJBSTCS

KJBSTCC		KJBHSTC

KJBHSTCS

KJBHSTCC		KJBSTCD



KJBSTCDC		KJBHSTCD



KJBHSTCDC		8 4.00 to 6.00P > W
(W ≥ 3.00)		10 to 202.02 3 5
T ≤ L-2		D+4
10 4.00 to 8.002.0D+4
12 4.00 to 10.002.0D+4
16 6.00 to 14.002.0D+4
2010.00 to 18.002.0D+4
2514.00 to 22.002.0D+4
[!] 1. When the wall is 2 mm or less (D - P)/2 ≤ 2}, R is 0.5.
[!] 2. For Straight Type, there must be a 1 mm or greater wall thickness between dowel hole and slotted hole (( (D - W)/2) - 2 ≥ 1).

Alterations

Part Number—P—W—L—T—(FC·NC, etc.)
KJBHSC20—P15.00—W12.00—L20  —NC
AlterationsCodeSpec.
Groove Alterations (for Adhesive Reservoir)
FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L ≥ 8 for Straight Type,
L ≥ 15 for Shouldered Type

[NG] Combination with alteration NC is not available
Groove Alterations (For retaining)
NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L ≥ 8 for Straight Type,
L ≥ 15 for Shouldered Type

[NG] Combination with alteration FC is not available
AlterationsCodeSpec.
Radius R C Chamfered
RNAdds C Chamfering (0.1 or less) to R.
Shoulder Thickness
Tolerance		TKCChanges shoulder thickness tolerance to ±0.01.
[ ! ] Applicable to Shouldered Type only
L Dimension Tolerance
LKCChanges L dimension tolerance to 0 -0.05.
[ ! ] Applicable only when L ≤ 19

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJBHSTC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCD25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCDC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBHSTCS25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC10-P[4-8/0.01]-W[3-8/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC12-P[4-10/0.01]-W[3-10/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC16-P[6-14/0.01]-W[3-14/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC20-P[10-18/0.01]-W[3-18/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTC25-P[14-22/0.01]-W[3-22/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCD25-P[15-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCDC25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS8-P[4-6/0.01]-W[3-5.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS10-P[4-8/0.01]-W[3-7.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS12-P[4-10/0.01]-W[3-9.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS16-P[6-14/0.01]-W[3-13.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS20-P[10-18/0.01]-W[3-17.99/0.01]-L[10-20/1]-T[2,​3,​5]
KJBSTCS25-P[14-22/0.01]-W[3-21.99/0.01]-L[10-20/1]-T[2,​3,​5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Material Hardness Details Type I.D. Tolerance Bushing Dia. D
(Ø) 		L P T W
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH7810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH71010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH71210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH71610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH72010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with ShoulderH72510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH7810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH71010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH71210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH71610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH72010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with ShoulderH72510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH7810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH71010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH71210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH71610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH72010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with ShoulderH72510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH7810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH71010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH71210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH71610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH72010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with ShoulderH72510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH7810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH71010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH71210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH71610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH72010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with ShoulderH72510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.01810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011010 ～ 204 ～ 82 ～ 53 ～ 8
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011210 ～ 204 ～ 102 ～ 53 ～ 10
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011610 ～ 206 ～ 142 ～ 53 ～ 14
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.012010 ～ 2010 ～ 182 ～ 53 ～ 18
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.012510 ～ 2014 ～ 222 ～ 53 ～ 22
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.01810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.011610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.012010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCDowel Pin Anti-rotation with Shoulder+0.03/+0.012510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.01810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.011010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.011210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.011610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.012010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10SteelProvidedJIS-SKS9350~60HRCD-Cut with Shoulder+0.03/+0.012510 ～ 2015 ～ 222 ～ 53 ～ 21.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.01810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.011010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.011210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.011610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.012010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelProvidedEN 1.4037 Equiv.45~50HRCD-Cut with Shoulder+0.03/+0.012510 ～ 2014 ～ 222 ～ 53 ～ 21.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.01810 ～ 204 ～ 62 ～ 53 ～ 5.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.011010 ～ 204 ～ 82 ～ 53 ～ 7.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.011210 ～ 204 ～ 102 ～ 53 ～ 9.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.011610 ～ 206 ～ 142 ～ 53 ～ 13.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.012010 ～ 2010 ～ 182 ～ 53 ～ 17.99
1 9 Days 10Stainless SteelNot ProvidedEN 1.4301 Equiv.-Dowel Pin Anti-rotation with Shoulder+0.03/+0.012510 ～ 2014 ～ 222 ～ 53 ～ 21.99

Loading...

  1. 1
 

Basic information

Basic Shape Shouldered Hole Selectable Straight Hole Shape Oval
With or w/o Tap Not Tapped Outer Diameter Tolerance Standard Surface Treatment Not Provided

Configure

Clear all

60Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Hardness

    • Provided
    • Not Provided

    Clear

  • Material

    • EN 1.4037 Equiv.
    • EN 1.4301 Equiv.
    • JIS-SKS93

    Clear

  • Hardness Details

    • 45~50HRC
    • 50~60HRC

    Clear

  • Type

    • D-Cut with Shoulder
    • Dowel Pin Anti-rotation with Shoulder

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • L

     [10-20/1]

    Clear

  • P

     [4-22/0.01]

    Clear

  • T

    • 2
    • 3
    • 5

    Clear

  • W

     [3-22/0.01]

    Clear

  • Type

    • KJBHSTC
    • KJBHSTCC
    • KJBHSTCD
    • KJBHSTCDC
    • KJBHSTCS
    • KJBSTC
    • KJBSTCC
    • KJBSTCD
    • KJBSTCDC
    • KJBSTCS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.