• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

5 Series / slot width 6 / 20x60mm

5 Series / slot width 6 / 20x60mm
  • Volume Discount

MISUMI

MISUMI


  • Order quantities extended (D-JIT)

(i)Remark

  • Cutting is free for this product. Please specify the length you prefer.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

HFS (Standard Type)
NFS (Economy Type)
HFS (Standard Type)
NFS (Economy Type)

* No tolerance is specified for fixed length extrusions
5 Series

Product Specifications

Slot Details
(Common to All Series)

Slot Bottom Details
(HFS, CAF, HFSY Series)

 
(NFS, NFSB, NFSF, NFST Series)

Enlarged View of A

Enlarged View of A

[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
■The 5 Series
is an aluminum extrusion with a 6 mm slot width. Applicable to M5 bolts.

Configurable Length Extrusion Specification Table

Part Number—L
HFS5−2060—800
KHFS5−2080—4000
 
TypeMaterialSurface TreatmentPart NumberL 0.5 mm Increments
(Tolerance ±0.5 mm)		Mass kg/mSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeHFS5－206050 to 40001.264641.97 × 10415.98 × 104
HFSEN AW-6061-T5 Equiv.Clear AnodizeHFS5－208050 to 40001.646052.56 × 10436 × 104
NFSEN AW-6063-T5 Equiv.Clear AnodizeNFS5－206050 to 40001.264641.97 × 10415.98 × 104
NFSEN AW-6063-T5 Equiv.Clear AnodizeNFS5－208050 to 40001.646052.56 × 10436 × 104
[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.

Fixed Length Extrusion (Effective Length 4,000 mm) Specification Table

[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
TypeMaterialSurface TreatmentPart NumberLmm
(No tolerance regulation)		Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS5－206040004641.97 × 10415.98 × 104
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS5－208040006052.56 × 10436 × 104
NFSEN AW-6063-T5 Equiv.Clear AnodizeKNFS5－206040004641.97 × 10415.98 × 104
NFSEN AW-6063-T5 Equiv.Clear AnodizeKNFS5－208040006052.56 × 10436 × 104
[ ! ] An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.

Alterations

[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.
TypeAlterationsAlteration CodesApp. ExampleContents
> End TappingEnd Tapping
(Center Hole)		LTP/RTP/TPW
LHP/RHP/HPW		End Tapping (Center Hole)Adds tapped holes on extrusion ends.
Blind Joints which require this alteration
(Screw Joint / Simple Joint)
End Tapping
(4 Side Holes)		LSP/RSP/SPWEnd Tapping (4 Side Holes)Adds tapped holes on extrusion corner ends.
> Cutting Method ChangeHigh Precision CutSCHigh Precision CutApplies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5).
* Only applicable to L ≤ 1,500
45-Degree CutL□T45/R□T4545-Degree CutCuts with 45-degree angle.
> Drill Wrench HoleWrench Hole in Fixed PositionLWP/RWPWrench Hole in Fixed PositionWrench access hole(s) for Blind Joints are drilled.
The hole location will be aligned with the mating extrusion’s tapped hole location.
Blind Joints which require this alteration
(Screw Joint / Single Joint / Tapping Joint)
Extrusion End Cap
The hole position moves by thickness		FL/FRHole Position Change for Extrusion End Cap ThicknessOffsets the wrench access hole for the thickness of Extrusion End Cap (3 mm).
The extrusion end cap will be flat with the adjacent extrusion surface.
Wrench Hole in Specified PositionAH/BH/AV/BVWrench Hole in Specified PositionAdds a wrench hole in a desired position from the left end.
Use for Blind Jointing in beam sections, etc.
> CounterboringCounterbores in Specified PositionZ6/XA100Counterbores in Specified PositionAdds a counterbored hole in a desired position from the left end.
Can be used for connecting extrusions or installing tables, etc.
> Blind
Joints
Dedicated Holes		D HoleLDH/RDHBlind Joint Dedicated Holes (D Hole)Adds required holes for Single Joint connections.
(Single Joints)
S HoleLSHBlind Joint Dedicated Holes (S Hole)Adds required holes for Pre-Assembly. Insertion Double Joint connections.
(Pre-Assembly Insertion Double Joints)
M HoleLMHBlind Joint Dedicated Holes (M Hole)Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections.
(Post-Assembly Insertion Double Joint / Center Joint)
L HoleJLPBlind Joint Dedicated Holes (L Hole)Adds required holes for Parallel Joint connections.
(Parallel Joints)
> Other MachiningHFSR End TappingLTS/RTS/TSWHFSR End TappingNecessary alteration to use Ends Protection Plates for HFSR series.
End Face C ChamferingCWEnd Face C ChamferingAdds C Chamfering on extrusion ends.
LabelingZZZLabelingAdds a sticker with catalog No. etc. on the aluminum extrusions.
Although number of characters are limited, customer's own serial number or unit number can be labeled.

List of Applicable Extrusion End Cap
Extrusion Part Number
Applicable Extrusion End Cap
Type
Color
Thickness
Part Number
Qty. Used
HFS5－2060
NFS5－2060

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
2.5
HFC5-2060-B
1
Light Gray
2.5
HFC5-2060-S
1
HFS5－2080
NFS5－2080

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
2.5
HFC5-2040-B
2
Light Gray
2.5
HFC5-2040-S
2

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
HFS5-2060-[50-4000/0.5]
HFS5-2080-[50-4000/0.5]
KHFS5-2060-4000
KHFS5-2080-4000
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSExtrusion Size Number of Extrusion Slots Extrusion Size: Thickness (T)
(mm) 		L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm) 		Overall Length L
(mm)

-

1 5 Days 1020x601 Slot x 3 Slots60Configuration-50 ～ 4000

-

1 5 Days 1020x801 Slot x 4 Slots80Configuration-50 ～ 4000

84.66 €

1 Available 5 Days 1020x601 Slot x 3 Slots60Stationary4000-

127.30 €

1 Available 5 Days 1020x801 Slot x 4 Slots80Stationary4000-

Loading...

  1. 1
 

Basic information

Standard Extrusion Size(mm) 20 Extrusion Series 5 Series Extrusion Type Rectangle
Extrusion Type HFS (Standard) Surface Treatment Clear Anodize Number of Grooved Surfaces 4-Side Slot
Surface Milled Not Provided Material EN AC-51400-T5 Equiv. Extrusion Size: Width (A)(mm) 20

Configure

Clear all

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Extrusion Size

    • 20x60
    • 20x80

    Clear

  • Number of Extrusion Slots

    • 1 Slot x 3 Slots
    • 1 Slot x 4 Slots

    Clear

  • Extrusion Size: Thickness (T)(mm)

    • 60
    • 80

    Clear

  • L Dimension Fixed, Specified

    • Configuration
    • Stationary

    Clear

  • Overall Length L (Effective Length)(mm)

    • 4000

    Clear

  • Overall Length L(mm)

     [50-4000/0.5mm Unit(s)]

    Clear

  • Type

    • HFS5-2060
    • HFS5-2080
    • KHFS5-2060
    • KHFS5-2080

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 5 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.