• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

6 Series / slot width 8 / 30x30mm

6 Series / slot width 8 / 30x30mm
  • Volume Discount

MISUMI

MISUMI


  • Order quantities extended (D-JIT)

(i)Remark

  • Cutting is free for this product. Please specify the length you prefer.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

HFS (Standard Type) HFSL (Lightweight Standard Type)
NFSL (Lightweight Economy Type) EFS (Lightweight Type)
NEFS (Economy Type) GNFS (High Rigidity Type)
GFS (High Rigidity Type)
Aluminum Extrusion - 6 Series, Square, 30 × 30 mm, 1 Slot, 4-Side Slots: Related Image
* No tolerance is specified for fixed length extrusions
6 Series
Aluminum Extrusion - 6 Series, Rectangle, 30 × 60 mm, 2 Slots, 4-Side Slot 1 Slot, 4-Side Slots: Related Image

Slot Details
(Common to
   All Series)

Slot Bottom Details
(HFS·CAF
   Series)

 
(GFS
   Series)

 
(EFS
   Series)

 
(NEFS·NEFSB·NFSL
   ·GNFS Series)

T Slot Dimension

Enlarged View of A

Enlarged View of A

Enlarged View of A

Enlarged View of A


■The 6 Series has a groove width of 8 mm and is applicable to M6 screws.

[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] If end tap is specified, it will be machined in the red circle.

Type Overview

■Type Comparison Overview
NFSL/HFSL/NFS (NEFS)/EFS
Light and economical, but inferior in rigidity HFS/GNFS/GFS
Heavy and higher price, but superior in rigidity

Part Number Display Method

Part Number—L
HFS6−3030
KHFS6－3030
KHFS6−3030		—
—
—		800
1000
4000

Specification Table

Configurable Length Extrusions (Alterations: Possible)

TypeMaterialSurface TreatmentPart NumberL 0.5 mm Increments
(Tolerance ±0.5 mm)		Mass kg/mSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeHFS6－303050 to 40000.93332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeHFSB6－303050 to 40000.93332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Clear CoatingCAF6－303050 to 40000.93332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Baked-on Finish (Yellow)*1HFSY6－303050 to 40000.93332.83 × 1042.83 × 104
HFSLEN AW-6061-T5 Equiv.Clear AnodizeHFSL6－303050 to 40000.762802.68 × 1042.68 × 104
HFSLEN AW-6061-T5 Equiv.Black AnodizeHFSLB6－303050 to 40000.762802.68 × 1042.68 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeEFS6－303050 to 40000.82962.85 × 1042.85 × 104
EFSEN AW-6061-T5 Equiv.Black AnodizeEFSB6－303050 to 40000.82962.85 × 1042.85 × 104
GNFSEN AW-6063-T6 Equiv.Clear AnodizeGNFS6－303050 to 40001.023773.47 × 1043.47 × 104
GFSEN AW-6061-T6 Equiv.Clear AnodizeGFS6－303050 to 40001.023773.47 × 1043.47 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeNEFS6－303050 to 40000.82962.85 × 1042.85 × 104
NEFSEN AW-6063-T5 Equiv.Black AnodizeNEFSB6－303050 to 40000.82962.85 × 1042.85 × 104
NFSLEN AW-6063-T5 Equiv.Clear AnodizeNFSL6－303050 to 40000.762802.68 × 1042.68 × 104
[ ! ]*1 The color of HFSY6 is D22-80 V (Japan Paint Manufacturers Association, Munsell Value Reference 2.5Y8/12).
[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.

Fixed Length Extrusion (Effective Length 4,000 mm, 1,000 mm) Specification Table (Alteration: Not possible)

[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
TypeMaterialSurface TreatmentPart NumberLmm
(No tolerance regulation) * 2		Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS6－303040003332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS6－303010003332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeKHFSB6－303040003332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Clear CoatingKCAF6－303040003332.83 × 1042.83 × 104
HFSEN AW-6061-T5 Equiv.Baked-on Finish (Yellow)*1KHFSY6－303040003332.83 × 1042.83 × 104
HFSLEN AW-6061-T5 Equiv.Clear AnodizeKHFSL6－303040002802.68 × 1042.68 × 104
HFSLEN AW-6061-T5 Equiv.Black AnodizeKHFSLB6－303040002802.68 × 1042.68 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeKEFS6－303040002962.85 × 1042.85 × 104
EFSEN AW-6061-T5 Equiv.Black AnodizeKEFSB6－303040002962.85 × 1042.85 × 104
GNFSEN AW-6063-T6 Equiv.Clear AnodizeKGNFS6－303040003773.47 × 1043.47 × 104
GFSEN AW-6061-T6 Equiv.Clear AnodizeKGFS6－303040003773.47 × 1043.47 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeKNEFS6－303040002962.85 × 1042.85 × 104
NEFSEN AW-6063-T5 Equiv.Black AnodizeKNEFSB6－303040002962.85 × 1042.85 × 104
NFSLEN AW-6063-T5 Equiv.Clear AnodizeKNFSL6－303040002802.68 × 1042.68 × 104
[ ! ] * 1 The color of HFSY6 is D22-80 V (Japan Paint Manufacturers Association, Munsell Value Reference 2.5Y8/12).
[ ! ]*2 An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.

[!] Recommended heat resistance temperature is up to 70°C. If the temperature remains at 100°C or higher, bending will occur due to the load.
However, temporary high temperatures up to 100°C, such as water vapor, are acceptable.

Color Image

 
Clear Anodize
Clear Coating (Gloss)
Black Anodize
Baked-on Finish (Yellow)
End Face Photo
[ ! ] The color is an image.
[ ! ] Both ends are not anodized or painted.
[!] Clear coating is applied over clear anodized. The surface is glossy.
[ ! ] No color number or color standard is provided for black anodize and clear anodize.

Features

6 Series Applications

Standard Aluminum Extrusions for various use such as medium coverings, small equipment bases, conveyor frames, etc.
Can be used as you desire with wide variety of products.

 

Usable in combination with different slot width extrusions.

Extrusions with different slot width can be combined when integrating frames and coverings.
6 Series, 5 Series, 8 Series Slot Width Mixed Extrusions and Assembly Brackets for Different Extrusion Sizes are available.
Utilize these components to assemble an extrusion frame as you desire.

Selection Support Information

■Extrusion Connection Method
The extrusion connection methods are roughly classified into the following two categories.
  
 
Brackets
Blind Joint
  
Connection Examples
  
Characteristics
·Connect outside the extrusion
·Can be moved to any position
·Inferior in appearance		·Connect inside the extrusion
·Superior in appearance
·Machining is required on extrusions
■Tapping alteration on ends (6 Series□30)
Center Part
  
Size/Position
Left Side
Right Side
Both Sides
Cross Section View
  
M8 Depth 24
LTP
RTP
TPW
  
M5 Depth 10
(Heli-Coil Inserted)
LHP
RHP
HPW
  
Tap Position
[ ! ] For other alterations, see "Alterations" below.

Corner Part (Standard types such as HFS only.)
Size/Position
Left Side
Right Side
Both Sides
Cross Section View
M5 Depth 10
LSP
RSP
SPW
Tap Position
■How to calculate aluminum extrusions load capacity (deflection)
[ ! ] The load capacity is a load where the deflection of the extrusion is within 1 mm per 1,000 mm of length.
Deflection exceeding this will not cause breakage, but it should be considered the maximum practical deflection. (The allowable deflection is proportional to the length. Example: 0.5 mm for 500 mm, 2 mm for 2,000 mm)

Alterations (Available only for configured length, not available for fixed length)

[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.
TypeAlterationsAlteration CodesApp. ExampleContents
> End TappingEnd Tapping
(Center Hole)		LTP/RTP/TPW
LHP/RHP/HPW		End Tapping (Center Hole)Adds tapped holes on extrusion ends.
Blind Joints which require this alteration
(Screw Joint / Simple Joint)
End Tapping
(4 Side Holes)		LSP/RSP/SPWEnd Tapping (4 Side Holes)Adds tapped holes on extrusion corner ends.
> Cutting Method ChangeHigh Precision CutSCHigh Precision CutApplies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5).
* Only applicable to L ≤ 1,500
45-Degree CutL□T45/R□T4545-Degree CutCuts with 45-degree angle.
> Drill Wrench HoleWrench Hole in Fixed PositionLWP/RWPWrench Hole in Fixed PositionWrench access hole(s) for Blind Joints are drilled.
The hole location will be aligned with the mating extrusion’s tapped hole location.
Blind Joints which require this alteration
(Screw Joint / Single Joint / Tapping Joint)
Extrusion End Cap
The hole position moves by thickness		FL/FRHole Position Change for Extrusion End Cap ThicknessOffsets the wrench access hole for the thickness of Extrusion End Cap (3 mm).
The extrusion end cap will be flat with the adjacent extrusion surface.
Wrench Hole in Specified PositionAH/BH/AV/BVWrench Hole in Specified PositionAdds a wrench hole in a desired position from the left end.
Use for Blind Jointing in beam sections, etc.
> CounterboringCounterbores in Specified PositionZ6/XA100Counterbores in Specified PositionAdds a counterbored hole in a desired position from the left end.
Can be used for connecting extrusions or installing tables, etc.
> Blind
Joints
Dedicated Holes		D HoleLDH/RDHBlind Joint Dedicated Holes (D Hole)Adds required holes for Single Joint connections.
(Single Joints)
S HoleLSHBlind Joint Dedicated Holes (S Hole)Adds required holes for Pre-Assembly. Insertion Double Joint connections.
(Pre-Assembly Insertion Double Joints)
M HoleLMHBlind Joint Dedicated Holes (M Hole)Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections.
(Post-Assembly Insertion Double Joint / Center Joint)
L HoleJLPBlind Joint Dedicated Holes (L Hole)Adds required holes for Parallel Joint connections.
(Parallel Joints)
> Other MachiningGNFS Series
GFS Series
End Tapping		LTS/RTS/TSWGNFS Series GFS Series End TappingAdds tapped holes on extrusion ends. This process is required for using extrusion end cap of the high rigidity plate type.
(Plates for High Rigidity Type)
HFSR End TappingLTS/RTS/TSWHFSR End TappingNecessary alteration to use Ends Protection Plates for HFSR series.
End Face C ChamferingCWEnd Face C ChamferingAdds C Chamfering on extrusion ends.
LabelingZZZLabelingAdds a sticker with catalog No. etc. on the aluminum extrusions.
Although number of characters are limited, customer's own serial number or unit number can be labeled.
List of Applicable Extrusion End Cap
Extrusion Part Number
Applicable Extrusion End Cap
Type
Color
Thickness
Part Number
Qty. Used
HFS6－3030
HFSB6－3030
CAF6－3030
HFSY6－3030
HFSL6－3030
HFSLB6－3030
EFS6－3030
EFSB6－3030
NEFS6－3030
NEFSB6－3030
NFSL6－3030

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
3
HFC6-3030-B
1
Light Gray
3
HFC6-3030-S
1
End Cap Mounting (Long Leg Type)
Black
3
HFCL6-3030-B
1
Light Gray
3
HFCL6-3030-S
1
Screw Mounting
Black
3
HFCB6-3030-B
1
Light Gray
3
HFCB6-3030-S
1
Yellow
3
HFCB6-3030-Y
1
GNFS6－3030
GFS6－3030

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting (For High Rigidity)
Black
3
GFC6-3030-B
1
Light Gray
3
GFC6-3030-S
1
Screw Mounted
(Plates for High Rigidity Type)

Specific alterations are required for installation.
Silver
2
HFCD6-3030
1

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
GFS6-3030-[50-4000/0.5]
HFS6-3030-[50-4000/0.5]
HFSB6-3030-[50-4000/0.5]
HFSY6-3030-[50-4000/0.5]
KEFS6-3030-4000
KGFS6-3030-4000
KHFS6-3030-1000
KHFS6-3030-4000
KHFSB6-3030-4000
KHFSY6-3030-4000
KNEFS6-3030-4000
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSExtrusion Type Surface Treatment Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm) 		Overall Length L
(mm)

-

1 5 Days 10GFS (High Rigidity)Clear AnodizeEN AW-6061-T6 Equiv.Configuration-50 ～ 4000

-

1 3 Days -HFS (Standard)Clear AnodizeEN AC-51400-T5 Equiv.Configuration-50 ～ 4000

-

1 3 Days 10HFS (Standard)Black AnodizeEN AC-51400-T5 Equiv.Configuration-50 ～ 4000

-

1 5 Days 10HFS (Standard)Baked Paint (Yellow)EN AC-51400-T5 Equiv.Configuration-50 ～ 4000

37.82 €

1 Available 5 Days 10EFS (Lightweight)Clear AnodizeEN AC-51400-T5 Equiv.Stationary4000-

90.23 €

1 Available 5 Days 10GFS (High Rigidity)Clear AnodizeEN AW-6061-T6 Equiv.Stationary4000-

12.81 €

1 Available 4 Days -HFS (Standard)Clear AnodizeEN AC-51400-T5 Equiv.Stationary1000-

42.73 €

1 Available 3 Days -HFS (Standard)Clear AnodizeEN AC-51400-T5 Equiv.Stationary4000-

52.33 €

1 Available 3 Days 10HFS (Standard)Black AnodizeEN AC-51400-T5 Equiv.Stationary4000-

106.33 €

1 Available 5 Days 10HFS (Standard)Baked Paint (Yellow)EN AC-51400-T5 Equiv.Stationary4000-

34.01 €

1 Available 5 Days 10NEFS (Economy Type)Clear AnodizeEN AW-6063-T5 Equiv.Stationary4000-

Loading...

  1. 1
 

Basic information

Standard Extrusion Size(mm) 30 Extrusion Size 30x30 Extrusion Series 6 Series
Extrusion Type Square Number of Extrusion Slots 1 Slot x 1 Slot Number of Grooved Surfaces 4-Side Slot
Surface Milled Not Provided Extrusion Size: Width (A)(mm) 30 Extrusion Size: Thickness (T)(mm) 30

Configure

Clear all

11Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Extrusion Type

    • HFS (Standard)
    • EFS (Lightweight)
    • GFS (High Rigidity)
    • NEFS (Economy Type)

    Clear

  • Surface Treatment

    • Clear Anodize
    • Black Anodize
    • Baked Paint (Yellow)

    Clear

  • Material

    • EN AC-51400-T5 Equiv.
    • EN AW-6063-T5 Equiv.
    • EN AW-6061-T6 Equiv.

    Clear

  • L Dimension Fixed, Specified

    • Configuration
    • Stationary

    Clear

  • Overall Length L (Effective Length)(mm)

    • 1000
    • 4000

    Clear

  • Overall Length L(mm)

     [50-4000/0.5mm Unit(s)]

    Clear

  • Type

    • GFS6-3030
    • HFS6-3030
    • HFSB6-3030
    • HFSY6-3030
    • KEFS6-3030
    • KGFS6-3030
    • KHFS6-3030-1000
    • KHFS6-3030-4000
    • KHFSB6-3030
    • KHFSY6-3030
    • KNEFS6-3030

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 3 Days or Less
    • 4 Days or Less
    • 5 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.