• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

8 Series / slot width 10 / 80x160mm

8 Series / slot width 10 / 80x160mm
  • Volume Discount

MISUMI

MISUMI


(i)Remark

  • Cutting is free for this product. Please specify the length you prefer.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing



HFS (Standard Type)
NEFS (Economy Type)
EFS (Lightweight Type)
 8 Series
Slot Details (Common to NFS, HFS, CAF, GNFS, GFS Series)
Slot Details (Common to EFS, NEFS□, NFSL Series)
Slot Bottom Details
Slot Bottom Details
(HFS, CAF Series)
(GFS Series)
(GNFS Series)
(EFS Series)
(NEFS, NEFSB, NFSL Series)
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A


■The 8 Series
is an aluminum extrusion with a 10 mm slot width. Applicable to M8 bolts.
[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.

Configurable Length Extrusion Specification Table

Part Number—L
HFS8−80160—800
KHFS8−80160—4000
 
TypeMaterialSurface TreatmentPart NumberL 0.5 mm Increments
(Tolerance ±0.5 mm)		Mass kg/mSectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeHFS8－8016050 to 400010.513891295 × 1041001 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeHFSB8－8016050 to 400010.513891295 × 1041001 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeEFS8－8016050 to 40009.833643304.4 × 1041007 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeNEFS8－8016050 to 40009.833643304.4 × 1041007 × 104
[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.

Fixed Length Extrusion (Effective Length 4,000 mm) Specification Table

[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
TypeMaterialSurface TreatmentPart NumberLmm
(No tolerance regulation)		Sectional Area mm2Cross Sectional Moment of Inertia mm4
ℓxℓy
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS8－8016040003891295 × 1041001 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeKHFSB8－8016040003891295 × 1041001 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeKEFS8－8016040003643304.4 × 1041006 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeKNEFS8－8016040003643304.4 × 1041007 × 104
[ ! ] An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.

Alterations

[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.
TypeAlterationsAlteration CodesApp. ExampleContents
> End TappingEnd Tapping
(Center Hole)		LTP/RTP/TPW
LHP/RHP/HPW		End Tapping (Center Hole)Adds tapped holes on extrusion ends.
Blind Joints which require this alteration
(Screw Joint / Simple Joint)
End Tapping
(4 Side Holes)		LSP/RSP/SPWEnd Tapping (4 Side Holes)Adds tapped holes on extrusion corner ends.
> Cutting Method ChangeHigh Precision CutSCHigh Precision CutApplies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5).
* Only applicable to L ≤ 1,500
45-Degree CutL□T45/R□T4545-Degree CutCuts with 45-degree angle.
> Drill Wrench HoleWrench Hole in Fixed PositionLWP/RWPWrench Hole in Fixed PositionWrench access hole(s) for Blind Joints are drilled.
The hole location will be aligned with the mating extrusion’s tapped hole location.
Blind Joints which require this alteration
(Screw Joint / Single Joint / Tapping Joint)
Extrusion End Cap
The hole position moves by thickness		FL/FRHole Position Change for Extrusion End Cap ThicknessOffsets the wrench access hole for the thickness of Extrusion End Cap (3 mm).
The extrusion end cap will be flat with the adjacent extrusion surface.
Wrench Hole in Specified PositionAH/BH/AV/BVWrench Hole in Specified PositionAdds a wrench hole in a desired position from the left end.
Use for Blind Jointing in beam sections, etc.
> CounterboringCounterbores in Specified PositionZ6/XA100Counterbores in Specified PositionAdds a counterbored hole in a desired position from the left end.
Can be used for connecting extrusions or installing tables, etc.
> Blind
Joints
Dedicated Holes		D HoleLDH/RDHBlind Joint Dedicated Holes (D Hole)Adds required holes for Single Joint connections.
(Single Joints)
S HoleLSHBlind Joint Dedicated Holes (S Hole)Adds required holes for Pre-Assembly. Insertion Double Joint connections.
(Pre-Assembly Insertion Double Joints)
M HoleLMHBlind Joint Dedicated Holes (M Hole)Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections.
(Post-Assembly Insertion Double Joint / Center Joint)
L HoleJLPBlind Joint Dedicated Holes (L Hole)Adds required holes for Parallel Joint connections.
(Parallel Joints)
> Other MachiningGNFS Series
GFS Series
End Tapping		LTS/RTS/TSWGNFS Series GFS Series End TappingAdds tapped holes on extrusion ends. This process is required for using extrusion end cap of the high rigidity plate type.
(Plates for High Rigidity Type)
End Face C ChamferingCWEnd Face C ChamferingAdds C Chamfering on extrusion ends.
LabelingZZZLabelingAdds a sticker with catalog No. etc. on the aluminum extrusions.
Although number of characters are limited, customer's own serial number or unit number can be labeled.
List of Applicable Extrusion End Cap
Extrusion Part Number
Applicable Extrusion End Cap
Type
Color
Thickness
Part Number
Qty. Used
HFS8－80160
HFSB8－80160
EFS8－80160
NEFS8－80160

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
3
HFC8-8080-B
2
Light Gray
3
HFC8-8080-S
2
Screw Mounting
Black
3
HFCB8-8080-B
2
Light Gray
3
HFCB8-8080-S
2
Yellow
3
HFCB8-8080-Y
2

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
HFS8-80160-[50-4000/0.5]
HFSB8-80160-[50-4000/0.5]
KHFS8-80160-4000
KHFSB8-80160-4000
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSSurface Treatment L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm) 		Overall Length L
(mm)

-

1 5 Days 10Clear AnodizeConfiguration-50 ～ 4000

-

1 5 Days 10Black AnodizeConfiguration-50 ～ 4000

762.32 €

1 Available 5 Days 10Clear AnodizeStationary4000-

984.82 €

1 Available 5 Days 10Black AnodizeStationary4000-

Loading...

  1. 1
 

Basic information

Standard Extrusion Size(mm) 80 Extrusion Size 80x160 Extrusion Series 8 Series
Extrusion Type Rectangle Number of Extrusion Slots 2 Slots x 4 Slots Extrusion Type HFS (Standard)
Number of Grooved Surfaces 4-Side Slot Surface Milled Not Provided Material EN AC-51400-T5 Equiv.
Extrusion Size: Width (A)(mm) 80 Extrusion Size: Thickness (T)(mm) 160

Configure

Clear all

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Surface Treatment

    • Clear Anodize
    • Black Anodize

    Clear

  • L Dimension Fixed, Specified

    • Configuration
    • Stationary

    Clear

  • Overall Length L (Effective Length)(mm)

    • 4000

    Clear

  • Overall Length L(mm)

     [50-4000/0.5mm Unit(s)]

    Clear

  • Type

    • HFS8-80160
    • HFSB8-80160
    • KHFS8-80160
    • KHFSB8-80160

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 5 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.