8 Series / slot width 10 / 40x40mm
- Volume Discount
(i)Remark
- Cutting is free for this product. Please specify the length you prefer.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
Dimensional Drawing
NFS (Economy Type)
HFS (Standard Type)
HFS (Standard Type)
| 8 Series |
 |
Slot Details (Common to NFS, HFS, CAF, GNFS, GFS Series)
Slot Details (Common to EFS, NEFS□, NFSL Series)
Slot Bottom Details
Slot Bottom Details
(HFS, CAF Series)
(GFS Series)
(GNFS Series)
(EFS Series)
(NEFS, NEFSB, NFSL Series)
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A
[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
■The 8 Series
is an aluminum extrusion with a 10 mm slot width. Applicable to M8 bolts.
is an aluminum extrusion with a 10 mm slot width. Applicable to M8 bolts.
Specification Table
| Part Number | — | L |
| HFSR8−4040 | — | 800 |
| KHFSR8−4040 | — | 4000 |
■ Configurable Length Extrusions
[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.
| Type | Material | Surface Treatment | Part Number | L 0.5 mm Increments | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | HFSR8－4040 | 50 to 4000 | 1.53 | 564 | 7.79 × 104 | 7.79 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Clear Anodize | NFSR8－4040 | 50 to 4000 | 1.53 | 564 | 7.79 × 104 | 7.79 × 104 |
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.
■ Fixed Length Extrusion (Effective Length 4,000 mm)
[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
[ ! ] An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.
[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
| Type | Material | Surface Treatment | Part Number | Lmm | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| HFS | EN AW-6061-T5 Equiv. | Clear Anodize | KHFSR8－4040 | 4000 | 564 | 7.79 × 104 | 7.79 × 104 |
| NFS | EN AW-6063-T5 Equiv. | Clear Anodize | KNFSR8－4040 | 4000 | 564 | 7.79 × 104 | 7.79 × 104 |
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.
Alterations
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.Some alterations are not applicable depending on types and sizes.
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > End Tapping | End Tapping (Center Hole) | LTP/RTP/TPW LHP/RHP/HPW |  | Adds tapped holes on extrusion ends. Blind Joints which require this alteration (Screw Joint / Simple Joint) |
| End Tapping (4 Side Holes) | LSP/RSP/SPW |  | Adds tapped holes on extrusion corner ends. | |
| > Cutting Method Change | High Precision Cut | SC |  | Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500 |
| 45-Degree Cut | L□T45/R□T45 |  | Cuts with 45-degree angle. | |
| > Drill Wrench Hole | Wrench Hole in Fixed Position | LWP/RWP |  | Wrench access hole(s) for Blind Joints are drilled. The hole location will be aligned with the mating extrusion’s tapped hole location. Blind Joints which require this alteration (Screw Joint / Single Joint / Tapping Joint) |
| Extrusion End Cap The hole position moves by thickness | FL/FR |  | Offsets the wrench access hole for the thickness of Extrusion End Cap (3 mm). The extrusion end cap will be flat with the adjacent extrusion surface. | |
| Wrench Hole in Specified Position | AH/BH/AV/BV |  | Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc. | |
| > Counterboring | Counterbores in Specified Position | Z6/XA100 |  | Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc. |
| > Blind Joints Dedicated Holes | D Hole | LDH/RDH |  | Adds required holes for Single Joint connections. (Single Joints) |
| S Hole | LSH |  | Adds required holes for Pre-Assembly. Insertion Double Joint connections. (Pre-Assembly Insertion Double Joints) | |
| M Hole | LMH |  | Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections. (Post-Assembly Insertion Double Joint / Center Joint) | |
| L Hole | JLP |  | Adds required holes for Parallel Joint connections. (Parallel Joints) | |
| > Other Machining | GNFS Series GFS Series End Tapping | LTS/RTS/TSW |  | Adds tapped holes on extrusion ends. This process is required for using extrusion end cap of the high rigidity plate type. (Plates for High Rigidity Type) |
| End Face C Chamfering | CW |  | Adds C Chamfering on extrusion ends. | |
| Labeling | ZZZ |  | Adds a sticker with catalog No. etc. on the aluminum extrusions. Although number of characters are limited, customer's own serial number or unit number can be labeled. |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| HFSR8-4040-[50-4000/0.5] |
| KHFSR8-4040-4000 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | L Dimension Fixed, Specified | Overall Length L (Effective Length) (mm) | Overall Length L (mm) | |
|---|---|---|---|---|---|---|---|---|
- | 1 | 5 Days | 10 | Configuration | - | 50 ～ 4000 | ||
114.31 € | 1 | Available | 5 Days | 10 | Stationary | 4000 | - |
Loading...
Basic information
| Standard Extrusion Size(mm) | 40 | Extrusion Series | 8 Series | Extrusion Type | Shape R |
|---|---|---|---|---|---|
| Extrusion Type | HFS (Standard) | Surface Treatment | Clear Anodize | Surface Milled | Not Provided |
| Material | EN AC-51400-T5 Equiv. | Extrusion Size: Width (A)(mm) | 40 | Extrusion Size: Thickness (T)(mm) | 40 |
Configure
Basic Attributes
-
L Dimension Fixed, Specified
- Configuration
- Stationary
-
Overall Length L (Effective Length)(mm)
- 4000
-
Overall Length L(mm)
-
Type
- HFSR8-4040
- KHFSR8-4040
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
8 Series (Groove Width 10 mm), 1-Row Groove, Reversing Bracket With Protrusion
MISUMI Standard Price : 1.04 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.