• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

8-50 Series / slot width 10 / 50x50mm

8-50 Series / slot width 10 / 50x50mm
  • Volume Discount

MISUMI

MISUMI


  • Order quantities extended (D-JIT)

(i)Remark

  • Cutting is free for this product. Please specify the length you prefer.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

NEFS (Economy Type) HFS (Standard Type) GNFS (High Rigidity Type)  
EFS (Standard Type) GFS (High Rigidity Type) 


* No tolerance is specified for fixed length extrusions
8-45 Series
 
 
Slot Details (Common to HFS, CAF, GNFS, NFSL Series)
Slot Details (Common to EFS and NEFS Series)
Slot Bottom Details
Slot Bottom Details
(HFS·CAF
Series)
(GFS Series)
(NFSL·GNFS
Series)
(EFS Series)
(NEFS Series)
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A
Enlarged View of A

* 5.5 for Light Type (HFSL, HFSLF, HFSLT, NFSL).
■The 8-45 Series has a
groove width of 10 mm and is applicable to M8 screws.

[ ! ] Cut surface and altered parts are not surface treated.
[ ! ] If end tap is specified, it will be machined in the red circle.

Type Overview

■Type Comparison Overview
NFSL/HFSL/NFS (NEFS)/EFS
Light and economical, but inferior in rigidity HFS/GNFS/GFS
Heavy and higher price, but superior in rigidity

Configurable Length Extrusion Specification Table (Alterations: Possible)

Part Number—L
HFS8−5050—800
KHFS8−5050—4000
 
TypeMaterialSurface TreatmentPart NumberL 0.5 mm Increments
(Tolerance ±0.5 mm)		Mass kg/mSectional Area mm2Cross Sectional Moment of Inertia mm4
?x?y
HFSEN AW-6061-T5 Equiv.Clear AnodizeHFS8－505050 to 40003.43115026.64 × 10426.64 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeHFSB8－505050 to 40003.43115026.64 × 10426.64 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeEFS8－505050 to 40002.84105326.98 × 10426.98 × 104
EFSEN AW-6061-T5 Equiv.Black AnodizeEFSB8－505050 to 40002.84105326.98 × 10426.98 × 104
GNFSEN AW-6063-T6 Equiv.Clear AnodizeGNFS8－505050 to 40004.4163338.16 × 10438.16 × 104
GFSEN AW-6061-T6 Equiv.Clear AnodizeGFS8－505050 to 40004.4163338.16 × 10438.16 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeNEFS8－505050 to 40002.84105326.98 × 10426.98 × 104
NEFSEN AW-6063-T5 Equiv.Black AnodizeNEFSB8－505050 to 40002.84105326.98 × 10426.98 × 104
[ ! ] Extrusions without anodizing are also available.
[ ! ] Applicable to 6,000 mm depending on products.
[ ! ] Not applicable to some extrusions.

Fixed Length Extrusion (Effective Length 4,000 mm) Specification Table (Alteration: Not possible)

[ ! ] Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
TypeMaterialSurface TreatmentPart NumberLmm
(No tolerance regulation) *2 		Sectional Area mm2Cross Sectional Moment of Inertia mm4
?x?y
HFSEN AW-6061-T5 Equiv.Clear AnodizeKHFS8－50504000115026.64 × 10426.64 × 104
HFSEN AW-6061-T5 Equiv.Black AnodizeKHFSB8－50504000115026.64 × 10426.64 × 104
EFSEN AW-6061-T5 Equiv.Clear AnodizeKEFS8－50504000105326.98 × 10426.98 × 104
EFSEN AW-6061-T5 Equiv.Black AnodizeKEFSB8－50504000105326.98 × 10426.98 × 104
GNFSEN AW-6063-T6 Equiv.Clear AnodizeKGNFS8－50504000163338.16 × 10438.16 × 104
GFSEN AW-6061-T6 Equiv.Clear AnodizeKGFS8－50504000163338.16 × 10438.16 × 104
NEFSEN AW-6063-T5 Equiv.Clear AnodizeKNEFS8－50504000105326.98 × 10426.98 × 104
NEFSEN AW-6063-T5 Equiv.Black AnodizeKNEFSB8－50504000105326.98 × 10426.98 × 104
[ ! ] An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
[ ! ]*2 An effective Length of 4,000 mm indicates the extrusion with 4,000 mm or more effective length.
The actual length with extra lengths on ends is more than 4000 mm (several tens of mm).
Fixed Length Extrusions need to be cut by users thus the exact length cannot be specified.

[!] Recommended heat resistance temperature is up to 70°C. If the temperature remains at 100°C or higher, bending will occur due to the load.
However, temporary high temperatures up to 100°C, such as water vapor, are acceptable.

Selection Support Information

■Extrusion Connection Method
The extrusion connection methods are roughly classified into the following two categories.
 
Brackets
Blind Joint
Connection Examples
Characteristics
·Connect outside the extrusion
·Can be moved to any position
·Inferior in appearance		·Connect inside the extrusion
·Superior in appearance
·Machining is required on extrusions
■Tapping alteration on ends (8-45 Series□50)
Center part
Size/Position
Left Side
Right Side
Both Sides
Cross Section View
M12 Depth 18
(Heli-coil is inserted to ø12.5)
LTP
RTP
TPW
M10 Depth 18
(Heli-Coil Inserted)
LHP
RHP
HPW
Tap Position
[ ! ] For other alterations, see "Alterations" below.
■How to calculate aluminum extrusions load capacity (deflection)
[ ! ] The load capacity is a load where the deflection of the extrusion is within 1 mm per 1,000 mm of length.
Deflection exceeding this will not cause breakage, but it should be considered the maximum practical deflection. (The allowable deflection is proportional to the length. Example: 0.5 mm for 500 mm, 2 mm for 2,000 mm)

Alterations (Available only for configured length, not available for fixed length)

[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.
Some alterations are not applicable depending on types and sizes.
TypeAlterationsAlteration CodesApp. ExampleContents
> End TappingEnd Tapping
(Center Hole)		LTP/RTP/TPW
LHP/RHP/HPW		End Tapping (Center Hole)Adds tapped holes on extrusion ends.
Blind Joints which require this alteration
(Screw Joint / Simple Joint)
End Tapping
(4 Side Holes)		LSP/RSP/SPWEnd Tapping (4 Side Holes)Adds tapped holes on extrusion corner ends.
> Cutting Method ChangeHigh Precision CutSCHigh Precision CutApplies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5).
* Only applicable to L ≤ 1,500
45-Degree CutL□T45/R□T4545-Degree CutCuts with 45-degree angle.
> Drill Wrench HoleWrench Hole in Fixed PositionLWP/RWPWrench Hole in Fixed PositionWrench access hole(s) for Blind Joints are drilled.
The hole location will be aligned with the mating extrusion’s tapped hole location.
Blind Joints which require this alteration
(Screw Joint / Single Joint / Tapping Joint)
Extrusion End Cap
The hole position moves by thickness		FL/FRHole Position Change for Extrusion End Cap ThicknessOffsets the wrench access hole for the thickness of Extrusion End Cap (3 mm).
The extrusion end cap will be flat with the adjacent extrusion surface.
Wrench Hole in Specified PositionAH/BH/AV/BVWrench Hole in Specified PositionAdds a wrench hole in a desired position from the left end.
Use for Blind Jointing in beam sections, etc.
> CounterboringCounterbores in Specified PositionZ6/XA100Counterbores in Specified PositionAdds a counterbored hole in a desired position from the left end.
Can be used for connecting extrusions or installing tables, etc.
> Blind
Joints
Dedicated Holes		D HoleLDH/RDHBlind Joint Dedicated Holes (D Hole)Adds required holes for Single Joint connections.
(Single Joints)
S HoleLSHBlind Joint Dedicated Holes (S Hole)Adds required holes for Pre-Assembly. Insertion Double Joint connections.
(Pre-Assembly Insertion Double Joints)
M HoleLMHBlind Joint Dedicated Holes (M Hole)Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections.
(Post-Assembly Insertion Double Joint / Center Joint)
L HoleJLPBlind Joint Dedicated Holes (L Hole)Adds required holes for Parallel Joint connections.
(Parallel Joints)
> Other MachiningGNFS Series
GFS Series
End Tapping		LTS/RTS/TSWGNFS Series GFS Series End TappingAdds tapped holes on extrusion ends. This process is required for using extrusion end cap of the high rigidity plate type.
(Plates for High Rigidity Type)
End Face C ChamferingCWEnd Face C ChamferingAdds C Chamfering on extrusion ends.
LabelingZZZLabelingAdds a sticker with catalog No. etc. on the aluminum extrusions.
Although number of characters are limited, customer's own serial number or unit number can be labeled.
List of Applicable Extrusion End Cap
Extrusion Part Number
Applicable Extrusion End Cap
Type
Color
Thickness
Part Number
Qty. Used
HFS8－5050
HFSB8－5050
EFS8－5050
EFSB8－5050
NEFS8－5050
NEFSB8－5050

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
3
HFC8-5050-B
1
Light Gray
3
HFC8-5050-S
1
Screw Mounting
Black
3
HFCB8-5050-B
1
Light Gray
3
HFCB8-5050-S
1
Yellow
3
HFCB8-5050-Y
1
GNFS8－5050
GFS8－5050

Same for Fixed Length Extrusions (Part number starting with K).
　
End Cap Mounting
Black
3
GFC8-5050-B
1
Light Gray
3
GFC8-5050-S
1
Screw Mounted
(Plates for High Rigidity Type)

Specific alterations are required for installation.
Silver
2
HFCD8-5050
1

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
GFS8-5050-[50-4000/0.5]
HFS8-5050-[50-4000/0.5]
HFSB8-5050-[50-4000/0.5]
KGFS8-5050-4000
KHFS8-5050-4000
KHFSB8-5050-4000
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSExtrusion Type Surface Treatment Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm) 		Overall Length L
(mm)

-

1 5 Days 10GFS (High Rigidity)Clear AnodizeEN AW-6061-T6 Equiv.Configuration-50 ～ 4000

-

1 3 Days 10HFS (Standard)Clear AnodizeEN AC-51400-T5 Equiv.Configuration-50 ～ 4000

-

1 5 Days 10HFS (Standard)Black AnodizeEN AC-51400-T5 Equiv.Configuration-50 ～ 4000

397.29 €

1 Available 5 Days 10GFS (High Rigidity)Clear AnodizeEN AW-6061-T6 Equiv.Stationary4000-

156.17 €

1 Available 3 Days 10HFS (Standard)Clear AnodizeEN AC-51400-T5 Equiv.Stationary4000-

260.33 €

1 Available 5 Days 10HFS (Standard)Black AnodizeEN AC-51400-T5 Equiv.Stationary4000-

Loading...

  1. 1
 

Basic information

Standard Extrusion Size(mm) 50 Extrusion Size 50x50 Extrusion Series 8-45 Series
Extrusion Type Square Number of Extrusion Slots 1 Slot x 1 Slot Number of Grooved Surfaces 4-Side Slot
Surface Milled Not Provided Extrusion Size: Width (A)(mm) 50 Extrusion Size: Thickness (T)(mm) 50

Configure

Clear all

6Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Extrusion Type

    • HFS (Standard)
    • GFS (High Rigidity)

    Clear

  • Surface Treatment

    • Clear Anodize
    • Black Anodize

    Clear

  • Material

    • EN AC-51400-T5 Equiv.
    • EN AW-6061-T6 Equiv.

    Clear

  • L Dimension Fixed, Specified

    • Configuration
    • Stationary

    Clear

  • Overall Length L (Effective Length)(mm)

    • 4000

    Clear

  • Overall Length L(mm)

     [50-4000/0.5mm Unit(s)]

    Clear

  • Type

    • GFS8-5050
    • HFS8-5050
    • HFSB8-5050
    • KGFS8-5050
    • KHFS8-5050
    • KHFSB8-5050

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 3 Days or Less
    • 5 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.