Aluminum Extrusion 8-45 Series, Square, Parallel Chamfering, 45 × 45, 50 × 50, 60 × 60, 90 × 90
(i)Remark
- Cutting is free for this product. Please specify the length you prefer.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
Dimensional Drawing
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
is an aluminum extrusion with a 10 mm slot width. Applicable to M8 bolts.
Specification Table
| Part Number | — | L |
| HFSP8−6060 | — | 600 |
| Part Number | L 0.5 mm Increments | Extrusion Series | T | A | |
| HFSP8 | 4545 | 100 to 3000 | HFS8−45 | 44 | 45 |
| 5050 | 49 | 50 | |||
| 10050 | 100 | ||||
| 50100 | 99 | 50 | |||
| 6060 | 59 | 60 | |||
| 9045 | 44 | 90 | |||
| 4590 | 89 | 45 | |||
| 9090 | 90 | ||||
| 909045 | |||||
| GFSP8 | 4545 | GFS8−45 | 44 | 45 | |
| 5050 | 49 | 50 | |||
| 10050 | 100 | ||||
| 50100 | 99 | 50 | |||
| 6060 | 59 | 60 | |||
| 9045 | 44 | 90 | |||
| 4590 | 89 | 45 | |||
| 9090 | 90 | ||||
Alterations
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.Some alterations are not applicable depending on types and sizes.
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > Counterboring | Counterbores in Specified Position | Z6/XA100 |  | Adds a counterbored hole in a desired position from the left end. Can be used for connecting extrusions or installing tables, etc. |
| > Drill Wrench Hole | Wrench Hole in Specified Position | AH/BH/AV/BV |  | Adds a wrench hole in a desired position from the left end. Use for Blind Jointing in beam sections, etc. |
| > Cutting Method Change | High Precision Cut | SC |  | Applies High Precision Cut with an overall length tolerance of L±0.2 (Standard = L±0.5). * Only applicable to L ≤ 1,500 |
| Alterations | Counterboring | Wrench Hole | High Precision Cut | ||||||||||||
| Code | Z Selection | XA | XB | XC | XD | XE | D Selection | AV | BV | CV | DV | EV | SC | ||
| Spec. | Z | d | d1 | Distance from the Left End Plane mm | D | Distance from the Left End Plane mm | 1,500 mm or less | ||||||||
| Hole Size Specifications of Hole Position | 6 | 6.5 | 11 | 7 or more(L−7) | 8 | 7 or more(L−7) | L Dim. ±0.2 | ||||||||
| 8 | 9 | 14 | |||||||||||||
* 1 When the cross section is rectangle (vertical), counterboring is not available for extrusions exceeding 60 mm in the length direction.
* 2 When the cross section is L-shaped, counterboring is not available for extrusions exceeding 60 mm in longitudinal direction, except for the lower portion.
[ ! ] When the cross section is L-shaped, select distance from left end by positioning the lower section on the right side.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| GFSP8-4545-[100-3000/0.5] |
| GFSP8-5050-[100-3000/0.5] |
| GFSP8-6060-[100-3000/0.5] |
| HFSP8-4545-[100-3000/0.5] |
| HFSP8-5050-[100-3000/0.5] |
| HFSP8-6060-[100-3000/0.5] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Standard Extrusion Size (mm) | Extrusion Size | Number of Extrusion Slots | Extrusion Type | Material | Extrusion Size: Width (A) (mm) | Extrusion Size: Thickness (T) (mm) | Overall Length L (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 10 | 45 | 45x45 | 1 Slot x 1 Slot | GFS (High Rigidity) | EN AW-6061-T6 Equiv. | 45 | 44 | 100 ～ 3000 | ||
| 1 | 7 Days | 10 | 50 | 50x50 | 1 Slot x 1 Slot | GFS (High Rigidity) | EN AW-6061-T6 Equiv. | 50 | 49 | 100 ～ 3000 | ||
| 1 | 7 Days | 10 | 60 | 60x60 | 1 Slot x 1 Slot | GFS (High Rigidity) | EN AW-6061-T6 Equiv. | 60 | 59 | 100 ～ 3000 | ||
| 1 | 7 Days | 10 | 45 | 45x45 | 1 Slot x 1 Slot | HFS (Standard) | EN AC-51400-T5 Equiv. | 45 | 44 | 100 ～ 3000 | ||
| 1 | 7 Days | 10 | 50 | 50x50 | 1 Slot x 1 Slot | HFS (Standard) | EN AC-51400-T5 Equiv. | 50 | 49 | 100 ～ 3000 | ||
| 1 | 7 Days | 10 | 60 | 60x60 | 1 Slot x 1 Slot | HFS (Standard) | EN AC-51400-T5 Equiv. | 60 | 59 | 100 ～ 3000 |
Loading...
App. Example
[!] Being extruded sections, products can twist. Supporting overall length of extrusion for use is recommended.
in reference plane,then slide the frame
to fixing position,passing screw heads
through frame slot.
and tighten the screw.
Basic information
| Extrusion Series | 8-45 Series | Extrusion Type | Square | Surface Treatment | Clear Anodize |
|---|---|---|---|---|---|
| Number of Grooved Surfaces | 4-Side Slot | Surface Milled | Provided | L Dimension Fixed, Specified | Configuration |
Configure
Basic Attributes
-
Standard Extrusion Size(mm)
-
Extrusion Size
-
Extrusion Type
- HFS (Standard)
- GFS (High Rigidity)
-
Material
- EN AC-51400-T5 Equiv.
- EN AW-6061-T6 Equiv.
-
Extrusion Size: Width (A)(mm)
-
Extrusion Size: Thickness (T)(mm)
-
Overall Length L(mm)
-
Type
- GFSP8-4545
- GFSP8-5050
- GFSP8-6060
- GFSP8-9090
- HFSP8-4545
- HFSP8-5050
- HFSP8-6060
- HFSP8-9090
-
Number of Extrusion Slots
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
8-45 Series (Groove Width 10 mm), 1-Row Groove, Reversing Bracket With Protrusion
MISUMI Standard Price : 1.12 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.