Metal Pushers / Tapped
[Features] A metal slider with a flat or spherical tip.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Flat | Sphere |
 | |
| Type | [M] Material | [S] Surface Treatment | [H] Hardness | |
| Flat | Sphere | |||
| Tapped | Tapped | |||
| KPHF | KPHR | EN 1.1191 Equiv. | Black Oxide | Induction Hardened and Tempered HRC45 to 50 |
| KPHFS | KPHRS | EN 1.4037 Equiv. | — | |
Specification Table
| Part Number | — | L | — | M |
| KPHF10 | — | 20 | — | 5 |
■Tapped Type " ! " KPHFS and KPHRS (EN 1.4037 Equiv.) may discolor due to Hardening.
[!] M × 2.5 + 5 ≤ L is required for Tapped Type. [!] 8S, 10S, 12, 12S, 14S, and 18S are fine thread pitch.
[ ! ] 12M is course thread pitch.
| Part Number | L 1 mm Increments | M Selection | ℓ | W | ||||||||||||||
| Type | D | Flat | Sphere | |||||||||||||||
| Flat KPHF KPHFS Sphere KPHR KPHRS | 6 | 15 to 50 | 17 to 50 | 3 | 8 | 5 | ||||||||||||
| 8 | 17 to 50 | 20 to 50 | 3 | 4 | 8 | 7 | ||||||||||||
| 10 | 19 to 50 | 23 to 50 | 3 | 4 | 5 | 8 | 8 | |||||||||||
| 12 | 21 to 100 | 26 to 100 | 4 | 5 | 6 | 10 | 10 | |||||||||||
| 15 | 23 to 100 | 30 to 100 | 5 | 6 | 8S | 8 | 10 | 14 | ||||||||||
| 16 | 10 | 14 | ||||||||||||||||
| 18 | 26 to 100 | 34 to 100 | 6 | 8S | 8 | 10S | 10 | 12S | 12 | 12M | 10 | 17 | ||||||
| 20 | 28 to 100 | 37 to 100 | 8S | 8 | 10S | 10 | 12S | 12 | 12M | 10 | 17 | |||||||
| 30 | 36 to 100 | 50 to 100 | 10S | 10 | 12S | 12 | 12M | 14S | 18S | 15 | 27 | |||||||
| 40 | 41 to 150 | 60 to 100 | 10S | 10 | 12S | 12 | 12M | 14S | 18S | 20 | 37 | |||||||
[ ! ] 12M is course thread pitch.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | RoHS | O.D. D (Ø) | Material | Tip Shape | L (mm) | Thread Dia. (Coarse) [M] | Thread Dia. (Coarse; "12" is Fine Thread Pitch.) [M] (mm) | Thread Dia. (Fine) [M] | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 10 | 6 | EN 1.1191 Equiv. | Flat Type | 15 ～ 50 | - | 3 | - | ||
| 1 | 7 Days | 10 | 8 | EN 1.1191 Equiv. | Flat Type | 17 ～ 50 | - | 3 ～ 4 | - | ||
| 1 | 7 Days | 10 | 10 | EN 1.1191 Equiv. | Flat Type | 19 ～ 50 | - | 3 ～ 5 | - | ||
| 1 | 12 Days | 10 | 12 | EN 1.1191 Equiv. | Flat Type | 21 ～ 100 | - | 4 ～ 6 | - | ||
| 1 | 7 Days | 10 | 15 | EN 1.1191 Equiv. | Flat Type | 23 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 16 | EN 1.1191 Equiv. | Flat Type | 23 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 18 | EN 1.1191 Equiv. | Flat Type | 26 ～ 100 | M12 [12M] | 6 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 20 | EN 1.1191 Equiv. | Flat Type | 28 ～ 100 | M12 [12M] | 8 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 30 | EN 1.1191 Equiv. | Flat Type | 36 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 40 | EN 1.1191 Equiv. | Flat Type | 41 ～ 150 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 6 | EN 1.4031 Equiv. | Flat Type | 15 ～ 50 | - | 3 | - | ||
| 1 | 7 Days | 10 | 8 | EN 1.4031 Equiv. | Flat Type | 17 ～ 50 | - | 3 ～ 4 | - | ||
| 1 | 7 Days | 10 | 10 | EN 1.4031 Equiv. | Flat Type | 19 ～ 50 | - | 3 ～ 5 | - | ||
| 1 | 7 Days | 10 | 12 | EN 1.4031 Equiv. | Flat Type | 21 ～ 100 | - | 4 ～ 6 | - | ||
| 1 | 7 Days | 10 | 15 | EN 1.4031 Equiv. | Flat Type | 23 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 16 | EN 1.4031 Equiv. | Flat Type | 23 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 18 | EN 1.4031 Equiv. | Flat Type | 26 ～ 100 | M12 [12M] | 6 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 20 | EN 1.4031 Equiv. | Flat Type | 28 ～ 100 | M12 [12M] | 8 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 30 | EN 1.4031 Equiv. | Flat Type | 36 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 40 | EN 1.4031 Equiv. | Flat Type | 41 ～ 150 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 6 | EN 1.1191 Equiv. | Spherical Type | 17 ～ 50 | - | 3 | - | ||
| 1 | 7 Days | 10 | 8 | EN 1.1191 Equiv. | Spherical Type | 20 ～ 50 | - | 3 ～ 4 | - | ||
| 1 | 7 Days | 10 | 10 | EN 1.1191 Equiv. | Spherical Type | 23 ～ 50 | - | 3 ～ 5 | - | ||
| 1 | 12 Days | 10 | 12 | EN 1.1191 Equiv. | Spherical Type | 26 ～ 100 | - | 4 ～ 6 | - | ||
| 1 | 7 Days | 10 | 15 | EN 1.1191 Equiv. | Spherical Type | 30 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 16 | EN 1.1191 Equiv. | Spherical Type | 30 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 18 | EN 1.1191 Equiv. | Spherical Type | 34 ～ 100 | M12 [12M] | 6 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 20 | EN 1.1191 Equiv. | Spherical Type | 37 ～ 100 | M12 [12M] | 8 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 30 | EN 1.1191 Equiv. | Spherical Type | 50 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 40 | EN 1.1191 Equiv. | Spherical Type | 60 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 6 | EN 1.4031 Equiv. | Spherical Type | 17 ～ 50 | - | 3 | - | ||
| 1 | 12 Days | 10 | 8 | EN 1.4031 Equiv. | Spherical Type | 20 ～ 50 | - | 3 ～ 4 | - | ||
| 1 | 7 Days | 10 | 10 | EN 1.4031 Equiv. | Spherical Type | 23 ～ 50 | - | 3 ～ 5 | - | ||
| 1 | 7 Days | 10 | 12 | EN 1.4031 Equiv. | Spherical Type | 26 ～ 100 | - | 4 ～ 6 | - | ||
| 1 | 7 Days | 10 | 15 | EN 1.4031 Equiv. | Spherical Type | 30 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 16 | EN 1.4031 Equiv. | Spherical Type | 30 ～ 100 | - | 5 ～ 8 | M8 [8S] | ||
| 1 | 7 Days | 10 | 18 | EN 1.4031 Equiv. | Spherical Type | 34 ～ 100 | M12 [12M] | 6 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 20 | EN 1.4031 Equiv. | Spherical Type | 37 ～ 100 | M12 [12M] | 8 ～ 12 | M8 [8S] / M10 [10S] / M12 [12S] | ||
| 1 | 7 Days | 10 | 30 | EN 1.4031 Equiv. | Spherical Type | 50 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] | ||
| 1 | 7 Days | 10 | 40 | EN 1.4031 Equiv. | Spherical Type | 60 ～ 100 | M12 [12M] | 10 ～ 12 | M10 [10S] / M12 [12S] / M14 [14S] / M18 [18S] |
Loading...
Basic information
| Shape | Tapped |
|---|
Configure
Basic Attributes
-
O.D. D(Ø)
-
Material
- EN 1.1191 Equiv.
- EN 1.4031 Equiv.
-
Tip Shape
- Flat Type
- Spherical Type
-
L(mm)
-
Thread Dia. (Coarse) [M]
- M12 [12M]
-
Thread Dia. (Coarse; "12" is Fine Thread Pitch.) [M](mm)
-
Thread Dia. (Fine) [M]
- M8 [8S]
- M10 [10S]
- M12 [12S]
- M14 [14S]
- M18 [18S]
-
Type
- KPHF
- KPHFS
- KPHR
- KPHRS
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.