• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Sheet Metal Mounting Plate / Bracket - Custom Dimensions Type - JTBAS

Sheet Metal Mounting Plate / Bracket - Custom Dimensions Type - JTBAS

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

JTBAS
[ ! ] Orientation of Slotted Holes can be changed. Please be careful about the dimensions. (Refer to the "Alterations" section.)
[ ! ] Green colored parameters can be omitted. If the parameter setting is omitted, the holes will be evenly distributed about the center.
[ ! ] For details on specifications and machining limits, see >>Here
■Hole Type Selection Chart
Hole TypeBolt HoleTapped Hole (Coarse)Through Hole with Tolerance
CodeN・NAMADA
形状図

[ ! ]

[ ! ]For d dimension, see "N, NA Machining Dimension Table"
on lower section of specification chart.		  
Part Number[ M ] Material[ S ] Surface Treatment
TypeMaterial Symbol
JTBASSP　T0.8~3.2
　T4.5~6.0
　T9.0		: EN 1.0330 Equiv.
: EN 1.0320 Equiv. (hot coiled)
: EN 1.0038 Equiv.(Black)		—
SPBBlack Oxide
SPUTrivalent Chromate (Clear)
SPKTrivalent Chromate (Black)
AMEN AW−5052 Equiv.—
AMWAnodize (Clear)
AMBAnodize (Black)
SUD　T0.8~6.0
　 T9.0		: EN 1.4301 Equiv. (Passivated 2B)
: EN 1.4301 Equiv.(No.1)　		—

Specification Table

Part Number－A－B－T－X－Y－G－Hole Specification (1)
Code / Nominal Dia.		－K L－S W－Hole Specification (2)
Code / Nominal Dia.
   －
Type—Material Symbol 
JTBAS－SP－A120－B80－T2.3－X25－Y20－G40－N8－K20－L70－S20－W40－MA4
Part Number1 mm IncrementsSelectionXYGHole Specification (1)KLSWHole Specification (2)
TypeMaterial SymbolABTCode / Specify MethodCode / Specify Method
JTBASSP
SPB
SPU
SPK		15
～
300		15
～
300		0.8 ・ 1.0 ・ 1.2 ・ 1.6 ・ 2.3
3.2 ・ 4.5 ・ 6.0 ・ 9.0		Configurable
0.1 mm Increments		N
(Bolt Hole)
0・3・4・5
6・8・10
(Select)
 [ ! ]		Configurable
0.1 mm Increments

[ ! ]K≤N×10		NA
(Bolt Hole)
0・3・4・5
6・8・10
(Select)
 [ ! ]		MA
  (Tapped Holes)
0・3・4・5
6・8・10
(Select)
 [ ! ]		DA
(Through Hole)
3 to 30
(0.5 mm Increments)
 [ ! ]
AM
AMW
AMB		1.0 ・ 1.5 ・ 2.0 ・ 3.0 ・ 4.0 ・ 5.0
SUD0.8 ・ 1.0 ・ 1.2 ・ 1.5 ・ 2.0
3.0 ・ 4.0 ・ 5.0 ・ 6.0 ・ 9.0
[ ! ] DA hole is not available for T9.0.
[ ! ] If the specified hole location is close to the edges, the hole may be deformed but will be machined as specified if within machining limits.
[ ! ] N, NA machining dimensions
N, NA Specified ValueThrough Hole Dia. (d)
0(No Hole)
33.5
44.5
55.5
66.5
89
1011
[ ! ] Hole Machining Table
TN・NA(Bolt Hole)MA(Tapped Holes)
0.80・3・4・5・6・8・100
1.0、1.20・3
1.5、1.60・3・4
2.0、2.30・3・4・5・6
3.0、3.20・3・4・5・6・8
4.0～6.00・3・4・5・6・8・10
9.00・5・6・8・100・5・6・8・10
[ ! ] T = 1.0 is not applicable for tapped holes to AM, AMW, or AMB

 

Alteration

Alteration
Slotted Hole Angle Change
Corner cut
Code
RC
CC
Spec.
Slotted holes are changed as shown above.
[!] Note the dimensional relationship
Specifying Method
Add RC to the end of a Part Number.
(Example) ... -RC		CC = 1 mm Increments
1 ≤ CC ≤ 10
 
Specifying Method
Add CC to the end of a Part Number.
(Example) ... -CC5
  ■Specifications, Machining Limits
[ ! ]1. See the diagram below for tolerances
<Standard Machined Dimension Tolerances>
ProductDimension Range
(A, B Dimension)		6 or lessOver 6, and
30 or less		Over 30, and
120 or less		Over 120, and
400 or less
Sheet Metal (No Bending)Tolerance（a・b）±0.1±0.2±0.3±0.5
*For sheet metals, Class B Tolerance stipulated in JIS B 0408, General dimensional tolerances for parts formed by press working from sheet metal is used.
[ ! ]2. Burr height 0.1 or less
[ ! ]3. In case of the thin plates, the tap ridges may be crushed, so please be careful when tightening.
[ ! ]4. When changing to a specification without holes, anodizing with T4 or more may cause a hang hole to be formed as shown in the figure below.
関連画像
[ ! ]5. Slotted holes may be shaped as shown below depending on dimensions.
         (The function as a mounting hole is not affected.) 

[ ! ]6. There are machining limits for thickness between hole and hole or between hole and end face. (Example: "b" on the drawing below)

関連画像
Tb
EN 1.0330 Equiv.
EN 1.0320 Equiv.
(hot coiled)
EN 1.0038 Equiv.		  
EN AW−5052 Equiv.EN 1.4301 Equiv.
  
0.8ー0.81
1.01.01.01
1.2ー1.21
1.61.51.51
2.32.02.01.5
3.23.03.01.5
4.54.04.02
ー5.05.02.5
6.0ー6.02.5
9.0ー9.04
[ ! ] The hole may be deformed if specified at the limit value shown above.
■Appearance per Material (Surface Treatment) and Machining Method
 NoneBlack OxideTrivalent Chromate (Clear)Trivalent Chromate (Black)
SPSPBSPUSPK
EN 1.0330 Equiv.
T0.8～3.2		関連画像関連画像関連画像関連画像
EN 1.0320 Equiv. (hot coiled)
T4.5～6.0		関連画像関連画像関連画像関連画像
EN 1.0038 Equiv.
（Black）
T9.0		関連画像関連画像関連画像関連画像
 NoneAnodize (Clear)Anodize (Black)
AMAMWAMB
EN AW−5052 Equiv.関連画像関連画像関連画像
 None
SUD
EN 1.4301 Equiv. (Passivated 2B)
T0.8～6.0		関連画像
EN 1.4301 Equiv.（No.1）
T9.0		関連画像

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
JTBAS-AM-A[15-300/1]-B[15-300/1]-T[1.5,​2,​3,​4,​5]
JTBAS-AMB-A[15-300/1]-B[15-300/1]-T[1.5,​2,​3,​4,​5]
JTBAS-AMW-A[15-300/1]-B[15-300/1]-T[1.5,​2,​3,​4,​5]
JTBAS-SP-A[15-300/1]-B[15-300/1]-T[1.6,​2.3,​3.2,​4.5,​6]
JTBAS-SPB-A[15-300/1]-B[15-300/1]-T[1.6,​2.3,​3.2,​4.5,​6]
JTBAS-SPK-A[15-300/1]-B[15-300/1]-T[1.6,​2.3,​3.2,​4.5,​6]
JTBAS-SPU-A[15-300/1]-B[15-300/1]-T[1.6,​2.3,​3.2,​4.5,​6]
JTBAS-SUD-A[15-300/1]-B[15-300/1]-T[1,​1.5,​2,​3,​4,​5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment A
(mm) 		B
(mm) 		T
(mm)
1 7 Days 10EN AW-5052 Equiv.Not Provided15 ～ 30015 ～ 3001.5 ～ 5
1 9 Days 10EN AW-5052 Equiv.Black Anodize15 ～ 30015 ～ 3001.5 ～ 5
1 9 Days 10EN AW-5052 Equiv.Clear Anodize15 ～ 30015 ～ 3001.5 ～ 5
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Not Provided15 ～ 30015 ～ 3001.6 ～ 6
1 9 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Black Oxide15 ～ 30015 ～ 3001.6 ～ 6
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (Black) 15 ～ 30015 ～ 3001.6 ～ 6
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (White)15 ～ 30015 ～ 3001.6 ～ 6
1 7 Days 10EN 1.4301 Equiv. (2B)Not Provided15 ～ 30015 ～ 3001 ～ 5

Loading...

  1. 1
 

Basic information

Type Sheet Metal Part Mounting Hole N/A Slotted Hole Yes
Side Hole N/A Hole Position Free Dimension Number Of Holes 4
Type Dimension Configurable Type Type JTBAS

Configure

Clear all

8Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • EN AW-5052 Equiv.
    • EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))
    • EN 1.4301 Equiv. (2B)

    Clear

  • Surface Treatment

    • Black Anodize
    • Black Oxide
    • Clear Anodize
    • Not Provided
    • Trivalent Chromate (Black)
    • Trivalent Chromate (White)

    Clear

  • A(mm)

     [15-300/1mm Unit(s)]

    Clear

  • B(mm)

     [15-300/1mm Unit(s)]

    Clear

  • T(mm)

    • 1
    • 1.5
    • 1.6
    • 2
    • 2.3
    • 3
    • 3.2
    • 4
    • 4.5
    • 5
    • 6

    Clear

  • Type

    • JTBAS-AM
    • JTBAS-AMB
    • JTBAS-AMW
    • JTBAS-SP
    • JTBAS-SPB
    • JTBAS-SPK
    • JTBAS-SPU
    • JTBAS-SUD

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.