• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

L-Shaped Sheet Metal Mounting Plate / Bracket -Hole Position Center Distribution Type- FSDAS

L-Shaped Sheet Metal Mounting Plate / Bracket -Hole Position Center Distribution Type- FSDAS

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

FSDAS 

(Common Dimension)

[ ! ] For details on specifications and machining limits, see here
■Hole Type Selection Chart
Hole TypeBolt HoleTapped Hole (Coarse)
CodeN・NAM・MA
Shape DiagramＬ型板金　取付板・ブラケット－センター振り分けタイプ－ FSDAS:関連画像
[ ! ] For the d dimensions, refer to the "N, NA Machining Dimension Table"
   section below the Specifications Table.		 
Part Number[ M ] Material[ S ] Surface Treatment
TypeMaterial Symbol
FSDASSPT0.8 to 3.2
T4.5 to 6.0
T9.0		: EN 1.0330 Equiv.
: EN 1.0320 Equiv. (hot coiled)
: EN 1.0038 Equiv.(Black)		－
SPUTrivalent Chromate (Clear)
SPKTrivalent Chromate (Black)
AMEN AW−5052 Equiv.－
AMWAnodize (Clear)
AMBAnodize (Black)
SUDT0.8 to 6.0
T9.0		: EN 1.4301 Equiv. (Passivated 2B)
: EN 1.4301 Equiv.(No.1)		－

Specification Table

Part Number－T－A－B－L－X－H－F－Hole Specification①
Code / Nominal Dia.		－V S－Hole Specification②
Code / Nominal Dia.
   －
Type－Material Symbol 
FSDAS－SPU－T3.2－A30－B30－L30－X25－H15－F10－M5－V15－S15－MA5
Part NumberSelection1 mm IncrementsXHFHole Specification①VSHole Specification②
TypeMaterial SymbolTABLCode / Specify MethodCode / Specify Method
FSDASSP
SPU
SPK		0.8 ・ 1.0 ・ 1.2 ・ 1.6 ・ 2.3
3.2 ・ 4.5 ・ 6.0 ・ 9.0		20
to
200		15
to
100
[ ! ]		15
to
100
[ ! ]		1 mm
Increments		N
(Bolt Hole)*
3・4・5
6・8・10
(Select)
[ ! ]		M
(Tapped Hole)
3・4・5
6・8・10
(Select)
[ ! ]		1 mm
Increments 		NA
(Bolt Hole)*
3・4・5
6・8・10
(Select)
[ ! ]		MA
(Tapped Hole)
3・4・5
6・8・10
(Select)
[ ! ]
AM
AMW
AMB		1.0 ・ 1.5 ・ 2.0 ・ 3.0 ・ 4.0 ・ 5.0
SUD0.8 ・ 1.0 ・ 1.2 ・ 1.5 ・ 2.0
3.0 ・ 4.0 ・ 5.0 ・ 6.0 ・ 9.0
[ ! ] For T6.0, B≧20, L≧20
[ ! ] For T9.0, B≧32, L≧20
[ ! ] Holes may deform if the hole locations are too close to the ends and bends, but they will be machined as specified if they are within the machining limits.
[ ! ] N, NA machining dimension table
N・NA Specified ValueThrough Hole Dia.(d)
33.5
44.5
55.5
66.5
89
1011
[ ! ] Hole Machining Table
TN・NA (Bolt Hole)M・MA (Tapped Holes)
0.83・4・5・6・8・10Not Possible
1.0、1.23
1.5、1.63・4
2.0、2.33・4・5・6
3.0、3.23・4・5・6・8
4.0 to 6.03・4・5・6・8・10
9.05・6・8・105・6・8・10
[ ! ] T = 1.0 is not applicable to AM, AMW, or AMB

 

Specifications, Machining Limits

[ ! ] 1. Burr height 0.1 or less
[ ! ] 2. Bend angle tolerance ±1°
[ ! ] 3. In case of the thin plates, the tap ridges may be crushed, so please be careful when tightening.
[ ! ] 4. There are machining limits for sections b, f, g below.
Tf (Distance between the hole and the bend)b
(Distance between the hole and the end face)		g
EN 1.0330 Equiv.
EN 1.0320 Equiv. (hot coiled)
EN 1.0038 Equiv.		EN AW−5052 Equiv.EN 1.4301 Equiv.Through HoleTapped HoleSlotted Hole parallel to Hole Bending with Tolerance
L BendZ, Convex BendL BendZ, Convex Bend
0.8ー0.823ーー3.515
1.01.01.02335.53.515.5
1.2ー1.22335.53.515.5
1.61.51.523.536416
2.32.02.024.53751.57
3.23.03.026.53971.59
4.54.04.037.54118(9)211
ー5.05.0314416152.518
6.0ー6.0314416152.518
9.0ー9.020ー20.5ー20420
[ ! ] Slotted hole f parallel to T4.0 and T4.5 will be (9).
[ ! ] The hole may be deformed if specified at the limit value shown above.
[ ! ] 5. There will be some scratches left by press brake. Use r, e, d dimension for reference only.
TR after BendingBrake Scratches
PositionDepth
EN 1.0330 Equiv.
EN 1.0320 Equiv. (hot coiled)
EN 1.0038 Equiv.		EN AW−5052 Equiv.EN 1.4301 Equiv.（r）（e）（d）
0.8ー0.80.850.1
1.01.01.0150.1
1.2ー1.21.250.1
1.61.51.51.560.1
2.32.02.02.07.50.1
3.23.03.03.010.50.2
4.54.04.04.013.50.3
ー5.05.05.0170.5
6.0ー6.06.0170.5
9.0ー9.09.0270.8
[ ! ] If the bend and hole are close to each other, r may be smaller.
[ ! ] 6. Bending causes biting and bulging.
[ ! ] 7. Since it is manufactured with minimum bending R, there is a possibility of breakage if it is used in an environment where stress is concentrated, such as impact.
■Appearance per Material (Surface Treatment) and Machining Method
 N/ABlack OxideTrivalent Chromate (White)Trivalent Chromate (Black)
SPSPBSPUSPK
EN 1.0330 Equiv.
T0.8 to 3.2
EN 1.0320 Equiv. (hot coiled)
T4.5 to 6.0
EN 1.0038 Equiv.
(Black)
T9.0
 N/AAnodize (Clear)Anodize (Black)
AMAMWAMB
EN AW−5052 Equiv.
 N/A
SUD
EN 1.4301 Equiv. (Passivated 2B)
T0.8 to 6.0
EN 1.4301 Equiv.（No.1）
T9.0

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
FSDAS-AM-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AM-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-AM-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AM-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-AMB-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AMB-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-AMB-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AMB-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-AMW-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AMW-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-AMW-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-AMW-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SP-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SP-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SP-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SP-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SPK-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SPK-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SPK-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SPK-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SPU-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SPU-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SPU-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SPU-T[2.3,​3.2,​4.5]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SUD-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SUD-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-M[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
FSDAS-SUD-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-MA[3,​4,​5,​6,​8,​10]
FSDAS-SUD-T[2,​3,​4]-A[20-200/1]-B[15-100/1]-L[15-100/1]-X[0-100/1]-H[0-200/1]-F[0-200/1]-N[3,​4,​5,​6,​8,​10]-V[0-100/1]-S[0-100/1]-NA[3,​4,​5,​6,​8,​10]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment External Dimension A
(mm) 		External Dimension B
(mm) 		External Dimension L
(mm) 		F
(mm) 		H
(mm) 		Hole Configurable 1, Screw Through Hole Nominal Dia. Selection [N] Hole Configurable 1, Tapped Hole [M]
(mm) 		Hole Configurable 2, Screw Through Hole Nominal Dia. Selection [NA] Hole Configurable 2, Tapped Hole [MA]
(mm) 		Plate Thickness t
(mm) 		S
(mm) 		V
(mm) 		X
(mm)
1 7 Days 10EN AW-5052 Equiv.Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN AW-5052 Equiv.Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN AW-5052 Equiv.Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN AW-5052 Equiv.Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Black Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Black Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Black Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Black Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Clear Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Clear Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Clear Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 9 Days 10EN AW-5052 Equiv.Clear Anodize20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (Black) 20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (Black) 20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (Black) 20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (Black) 20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (White)20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (White)20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (White)20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))Trivalent Chromate (White)20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2.3 ～ 4.50 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.4301 Equiv. (2B)Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 10-3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.4301 Equiv. (2B)Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 200-3 ～ 103 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.4301 Equiv. (2B)Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10--3 ～ 102 ～ 40 ～ 1000 ～ 1000 ～ 100
1 7 Days 10EN 1.4301 Equiv. (2B)Not Provided20 ～ 20015 ～ 10015 ～ 1000 ～ 2000 ～ 2003 ～ 10-3 ～ 10-2 ～ 40 ～ 1000 ～ 1000 ～ 100

Loading...

  1. 1
 

Basic information

Type Sheet Metal Part Mounting Hole N/A Slotted Hole N/A
Hole Position Center Allocation Number of Front Holes 2 Number of Bottom Holes 2
Type FSDAS Type Center Symmetrical Type

Configure

Clear all

28Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • EN AW-5052 Equiv.
    • EN 1.0330 Equiv. (EN 1.0320 Equiv. (hot-rolled))
    • EN 1.4301 Equiv. (2B)

    Clear

  • Surface Treatment

    • Black Anodize
    • Clear Anodize
    • Not Provided
    • Trivalent Chromate (Black)
    • Trivalent Chromate (White)

    Clear

  • External Dimension A(mm)

     [20-200/1mm Unit(s)]

    Clear

  • External Dimension B(mm)

     [15-100/1mm Unit(s)]

    Clear

  • External Dimension L(mm)

     [15-100/1mm Unit(s)]

    Clear

  • F(mm)

     [0-200/1mm Unit(s)]

    Clear

  • H(mm)

     [0-200/1mm Unit(s)]

    Clear

  • Hole Configurable 1, Screw Through Hole Nominal Dia. Selection [N]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Hole Configurable 1, Tapped Hole [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Hole Configurable 2, Screw Through Hole Nominal Dia. Selection [NA]

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Hole Configurable 2, Tapped Hole [MA](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Plate Thickness t(mm)

    • 2
    • 2.3
    • 3
    • 3.2
    • 4
    • 4.5

    Clear

  • S(mm)

     [0-100/1mm Unit(s)]

    Clear

  • V(mm)

     [0-100/1mm Unit(s)]

    Clear

  • X(mm)

     [0-100/1mm Unit(s)]

    Clear

  • Type

    • FSDAS-AM
    • FSDAS-AMB
    • FSDAS-AMW
    • FSDAS-SP
    • FSDAS-SPK
    • FSDAS-SPU
    • FSDAS-SUD

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.