EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Welded Mounting Plate / Bracket -L-Shaped Type- WAS

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Dimensional Drawing

WAS (Single Gusset Type)

[ ! ] T Dim. Tolerance
T Dim. tolerances for A, B, L dimensions per 100 mm

Material	T Tolerance
EN 1.0038 Equiv.	±0.5/100
EN AW−5052 Equiv.	±0.5/100
EN 1.4301 Equiv.	±0.65/100

[!] Gusset thickness will be as shown in below chart.

T	8·10	14·17	20
t	6	9 (10)	12

Both ends of gusset thickness (t) are (

) and t (10) indicates the gusset thickness for EN AW−5052 Equiv.

[ ! ] Hole pitch dimension tolerance conforms to JIS B 0405 Class m.

[ ! ] C0.2 to C0.5, unless otherwise specified

Mounting Type (Front Machining)	Cylinder Mounting Type (Front Machining)	Motor Mounting Type (Front Machining)
Front Config.B	Front Config.C	Front Config.M


2 Bottom Holes (Single Gusset Type)	4 Bottom Holes (Single Gusset Type)	Slotted Bottom Holes (Single Gusset Type) (Single Gusset Type)
Bottom Config.D	Bottom Config.F	Bottom Config.N

[ ! ] Note for weld bead and hole interferences
[ ! ] Joints are welded.

Weld Bead

Material	Bead Length [f]
EN 1.0038 Equiv.	5 to 10
EN AW−5052 Equiv.	10 to 15
EN 1.4301 Equiv.	5 to 10

■Hole Type Selection Chart

Hole Type

Tapped Hole

Bolt Hole

Counterbored Holes

Counterbored Holes (Back)

Code

M·MA

N・NA

ZB·ZBA

Shape Diagram

Machining
Specifications

Effective Tap Length
Max. M, MA × 2

Dimensions	Screw Nominal Size
Dimensions	3	4	5	6	8	10	12	16
d, h	3.5	4.5	5.5	6.5	9	11	14	18
d₁	6.5	8	9.5	11	14	18	20	26

[ ! ] For the Blank Type with no holes, if the material symbol [ABW] or [ABB] is specified, the material may have [plating wire marks] and [plating color variations] as shown on the right.

[ ! ] For the Blank Type with no holes, if the material symbol [SBM] is specified, the material may have [plating wire hanger holes] as shown on the right.
　

* A ø3 hole may be present on (*) area.

Part Number					Material	Surface Treatment
	Type			Material Symbol
Blank Type Single Gusset WAS	2 Bottom Hole Type Single Gusset WASBD WASCD WASMD	4 Bottom Hole Type Single Gusset WASBF WASCF WASMF	Slotted Bottom Holes (Single Gusset Type) WASBN WASCN WASMN	SB	EN 1.0038 Equiv.	—
				SBB		Black Oxide
				SBM		Electroless Nickel Plating
				AB	EN AW−5052 Equiv.	—
				ABW		Anodize (Clear)
				ABB		Anodize (Black)
				SUB	EN 1.4301 Equiv.	—

Shot Blasted

Specification Table

Part Number

—

Hole Specification
Code / Nominal Dia.

—

Hole Specification
Code / Nominal Dia.

—

Type

Front Config.

Bottom Config.

—

Material Symbol

WAS

—

T10

—

A150

—

B60

—

L80

—

Y120

WAS

—

SBB

—

T10

—

A150

—

B60

—

L80

—

Y120

—

H50

—

F50

—

G50

—

V60

—

S20

—

NA6

[ ! ] Please make sure that all are half-size characters.

Part Number

T Selection

External dimensions configurable 1 mm Increments

Hole Specification

Type

Front Config.

Bottom Config.

Material Symbol

Code

Nominal Dia.

Code

Nominal Dia.

Single Gusset
WAS

Mounting Type
B
Cylinder Mounting Type
C
Motor Mounting Type
M

Single Gusset
D (2 Hole Mounting Type)
F (4 Hole Mounting Type)
N (Slotted Hole Mounting Type)

SB
SBB
SBM
AB
ABW
ABB
SUB

(8)
10
14
17
20
(8) Applies to EN 1.0038 Equiv. only

50 to 300

40 to 150

40 to 200

30 to 290
Y > T × 2
When A > 150

Y ≥ A/2

0.1 mm Increments

3 to 30 (0.5 mm Increments)
31 to 100 (1 mm Increments)

M
N

Z

ZB

0
(No Hole)
3
4
5
6
8
10
12
16

0.1 mm Increments

MA
NA

ZBA

0
(No Hole)
3
4
5
6
8
10
12

0.1 mm Increments
K ≤ NA × 5

For the machining dimensions, see Hole Type Selection Chart
[Type Selection Method]
Select Gusset shape. (Single or Double)·····Example shown is with Single Gusset. WAS
Select front hole shape. ·······················Example shows Mounting Type. B
Select bottom mounting hole qty. or hole type. ····Example shows 2 Hole Mounting Type. D

Alteration

Alterations	Corner Cut Change	Gusset Position Change	Slotted Bottom Hole Angle Change	D hole position change	D Hole tolerance change	Back side milling alteration
Alterations		Single Gusset
Code	CC	RBC	RC	HDC	DC	FC
Spec.	CC = 1 mm Increments [ ! ]3 ≤ CC ≤ 30 Specifying Method Add CC to the end of a Part Number. Example: ... -CC10	RBC = 1 mm Increments [ ! ]2 ≤ RBC ≤ L－2 (Single Gusset Type) [ ! ] RBC ≤ L/2 - t - 2 (Double Gusset Type) Specifying Method Add RBC at the end of the type designation (Example) ... -RBC5	NA slotted hole is rotated 90° about the center. 　 Specifying Method Add RC to the end of a Part Number. (Example) ... -RC	E dimension specification is rotated 180°. 　 Specifying Method Add HDC at the end of the type designation (Example) ... -HDC	Center hole D is changed to a precision hole (H7). DC = 1 mm Increments [ ! ]3 ≤ DC ≤ 100 Specifying Method Specify by replacing dim. D with DC (Example) ... -DC20	Backside is milled. [ ! ] Milling is to end 10 mm away from the gusset. Specifying Method Add FC at the end of the type designation (Example) ... -FC

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
WAS-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-AB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-ABW-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T8-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SBM-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WAS-SUB-T20-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T10-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-Z[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T14-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-ZB[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-M[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-ZBA[0,3,4,5,6,8,10,12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-MA[0,3,4,5,6,8,10,12]
WASBD-AB-T17-A[50-300/1]-B[40-150/1]-L[40-200/1]-Y[30-290/1]-H[0-300/0.1]-F[0-200/0.1]-G[0-300/0.1]-N[0,3,4,5,6,8,10,12,16]-V[0-200/0.1]-S[0-150/0.1]-NA[0,3,4,5,6,8,10,12]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Part Mounting Hole	Slotted Hole	Number of Front Holes	Number of Bottom Holes	Front Shape	Bottom Surface Shape	Type	Material	Surface Treatment	Plate Thickness T	D Hole tolerance change (H7) [DC] (Hole Dia. Configurable) (mm)	E (mm)	External Dimension A (mm)	External Dimension B (mm)	External Dimension L (mm)	F (mm)	G (mm)	H (mm)	Hole Configurable 1, Counterbored Hole (Back) [ZB]	Hole Configurable 1, Counterbored Hole (Front) [Z]	Hole Configurable 1, Screw Through Hole Nominal Dia. Selection [N]	Hole Configurable 1, Tapped Hole [M] (mm)	Hole Configurable 2, Counterbored Hole (Back) [ZBA]	Hole Configurable 2, Screw Through Hole Nominal Dia. Selection [NA]	Hole Configurable 2, Tapped Hole [MA] (mm)	K (mm)	Q (mm)	S (mm)	Through Hole Dia. D (mm)	V (mm)	W (mm)	Y (mm)
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Not Provided	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Black Anodize	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Black Anodize	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Black Anodize	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Black Anodize	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Clear Anodize	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Clear Anodize	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Clear Anodize	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN AW-5052 Equiv.	Clear Anodize	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Not Provided	8	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Not Provided	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Black Oxide	8	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Black Oxide	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Black Oxide	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Black Oxide	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Black Oxide	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Electroless Nickel Plating	8	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Electroless Nickel Plating	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Electroless Nickel Plating	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Electroless Nickel Plating	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	12 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.0038 Equiv.	Electroless Nickel Plating	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.4301 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.4301 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.4301 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	0	0	No Hole	No Hole	WAS	EN 1.4301 Equiv.	Not Provided	20	-	-	50 ～ 300	40 ～ 150	40 ～ 200	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	10	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	0 ～ 16	-	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	14	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	0 ～ 16	-	-	-	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	-	0 ～ 16	0 ～ 12	-	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	-	0 ～ 12	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290
-	1	9 Days	10	N/A	N/A	4	2	4-Hole	2-Hole	WASBD	EN AW-5052 Equiv.	Not Provided	17	-	-	50 ～ 300	40 ～ 150	40 ～ 200	0 ～ 200	0 ～ 300	0 ～ 300	-	-	0 ～ 16	-	-	0 ～ 12	-	-	-	0 ～ 150	-	0 ～ 200	-	30 ～ 290

1
2
3
4
5
Next >>

App. Example

Welded Mounting Plates, Brackets - L-Shaped Type: Related Image

Products homepage

Basic information

Type	Welded	Rib Type	Single Rib	Type	Welding Type

Configure

6,107Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Part Mounting Hole
- Yes
- N/A
Clear
Slotted Hole
- Yes
- N/A
Clear
Number of Front Holes
- 0
- 4
- 5
Clear
Number of Bottom Holes
- 0
- 2
- 4
Clear
Front Shape
- 4-Hole
- Center Hole + 4 Holes
- Center Hole + 4 Holes (PCD)
- No Hole
Clear
Bottom Surface Shape
- 2-Hole
- 4-Hole
- 4-Slotted Hole
- No Hole
Clear
Type
- WAS
- WASBD
- WASBF
- WASBN
- WASCD
- WASCF
- WASCN
- WASMD
- WASMF
- WASMN
Clear
Material
- EN AW-5052 Equiv.
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
Clear
Surface Treatment
- Black Anodize
- Black Oxide
- Clear Anodize
- Electroless Nickel Plating
- Not Provided
Clear
Plate Thickness T
- 8
- 10
- 14
- 17
- 20
Clear
D Hole tolerance change (H7) [DC] (Hole Dia. Configurable)(mm)
[3-100/1mm Unit(s)]
Clear
E(mm)
[0-150/0.1mm Unit(s)]
Clear
External Dimension A(mm)
[50-300/1mm Unit(s)]
Clear
External Dimension B(mm)
[40-150/1mm Unit(s)]
Clear
External Dimension L(mm)
[40-200/1mm Unit(s)]
Clear
F(mm)
[0-200/0.1mm Unit(s)]
Clear
G(mm)
[0-300/0.1mm Unit(s)]
Clear
H(mm)
[0-300/0.1mm Unit(s)]
Clear
Hole Configurable 1, Counterbored Hole (Back) [ZB]
0

3

4

5

6

8

10

12

16
Clear
Hole Configurable 1, Counterbored Hole (Front) [Z]
0

3

4

5

6

8

10

12

16
Clear
Hole Configurable 1, Screw Through Hole Nominal Dia. Selection [N]
0

3

4

5

6

8

10

12

16
Clear
Hole Configurable 1, Tapped Hole [M](mm)
0

3

4

5

6

8

10

12

16
Clear
Hole Configurable 2, Counterbored Hole (Back) [ZBA]
0

3

4

5

6

8

10

12
Clear
Hole Configurable 2, Screw Through Hole Nominal Dia. Selection [NA]
0

3

4

5

6

8

10

12
Clear
Hole Configurable 2, Tapped Hole [MA](mm)
0

3

4

5

6

8

10

12
Clear
K(mm)
[4-80/0.1mm Unit(s)]
Clear
Q(mm)
[0-200/0.1mm Unit(s)]
Clear
S(mm)
[0-150/0.1mm Unit(s)]
Clear
Through Hole Dia. D(mm)
[3-30/0.5mm Unit(s)][31-100/1mm Unit(s)]
Clear
V(mm)
[0-200/0.1mm Unit(s)]
Clear
W(mm)
[0-150/0.1mm Unit(s)]
Clear
Y(mm)
[30-290/1mm Unit(s)]
Clear
Type
- WAS-AB
- WAS-ABB
- WAS-ABW
- WAS-SB
- WAS-SBB
- WAS-SBM
- WAS-SUB
- WASBD-AB
- WASBD-ABB
- WASBD-ABW
- WASBD-SB
- WASBD-SBB
- WASBD-SBM
- WASBD-SUB
- WASBF-AB
- WASBF-ABB
- WASBF-ABW
- WASBF-SB
- WASBF-SBB
- WASBF-SBM
- WASBF-SUB
- WASBN-AB
- WASBN-ABB
- WASBN-ABW
- WASBN-SB
- WASBN-SBB
- WASBN-SBM
- WASBN-SUB
- WASCD-AB
- WASCD-ABB
- WASCD-ABW
- WASCD-SB
- WASCD-SBB
- WASCD-SBM
- WASCD-SUB
- WASCF-AB
- WASCF-ABB
- WASCF-ABW
- WASCF-SB
- WASCF-SBB
- WASCF-SBM
- WASCF-SUB
- WASCN-AB
- WASCN-ABB
- WASCN-ABW
- WASCN-SB
- WASCN-SBB
- WASCN-SBM
- WASCN-SUB
- WASMD-AB
- WASMD-ABB
- WASMD-ABW
- WASMD-SB
- WASMD-SBB
- WASMD-SBM
- WASMD-SUB
- WASMF-AB
- WASMF-ABB
- WASMF-ABW
- WASMF-SB
- WASMF-SBB
- WASMF-SBM
- WASMF-SUB
- WASMN-AB
- WASMN-ABB
- WASMN-ABW
- WASMN-SB
- WASMN-SBB
- WASMN-SBM
- WASMN-SUB
Clear
Filter by CAD data type
- 2D
- 3D
Clear