• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Locators (Flat Surface) Two Hole Type

Locators (Flat Surface) Two Hole Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

[Features] Shape of mounting surface: flat, fixing holes: This is a 2-circle mounting block.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Receiving Piece (Flat) - 2-Hole Type: Related Image
[!]The shaded area is the hardened area.
[!]The chamfer on the workpiece receiving surface is C0.5. The other chamfers will be slight chamfering of approximately C0.3.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m.
Type[M] Material[ H ] Hardness
UKSFTEN 1.0038 Equiv.—
UKNFTEN 1.1206 Equiv.—
UKCFTPartially hardened only at the tip 55HRC or higher
UKUFTEN 1.4301 Equiv.—

Specification Table

Part Number—L—H—W—A—N—F—P
UKSFT12—L46—H15—W30—A35—N7—F13—P7

 

Part NumberL Configurable
1 mm Increments		H Selection *1W Configurable *2
1 mm Increments		A Specification
0.01 mm Increments		N Selection
(Through Hole)		F Specification *3P Configurable *3
TypeT Selection
UKSFT
UKNFT
UKCFT
UKUFT		9
12
16
19
20		29 to 7010
12
15
20		17 to 5810 to 1007
9		Configurable
0.1 mm
Unit

* 1 H+1 ≤ A
* 2 When A ≤ 60, 10 ≤ L - W, and when A > 60, 12 ≤ L - W.
* 3 A minimum wall thickness of 1 mm is required around the hole machining.

Alterations

Alterations
Code		Alteration detailsApplicable conditionsOrdering example 
Change
hole
type		MTapped Hole
Receiving Piece (Flat) - 2-Hole Type: Related Image		Changed both through holes (N) to tapped holes.
·M6/M8
Ordering Code: N7→M6		-UKSFT12-L46-H15-W30-A35-M6-F13-P7

[ ! ] A minimum wall thickness of 1 mm is required around the holes machining for the alteration described on the left.

ZCounterbored Hole
Receiving Piece (Flat) - 2-Hole Type: Related Image		Changed both through holes (N) to counterbored holes.
·Z6/Z8
Ordering Code: N9→Z8
DimensionScrew Nominal Dia.
68
d·h79
d11114
[!]Only applicable to T = 16, 19, 20UKSFT16-L46-H15-W30-A35-Z6-F13-P7
ZGCounterbored Hole (For spring washer)
Receiving Piece (Flat) - 2-Hole Type: Related Image		Changed both through holes (N) to counterbored holes (for spring washers).
·ZG6/ZG8
Ordering Code: N9→ZG8
DimensionScrew Nominal Dia.
68
d79
d11114
h811
[!]Only applicable to T = 16, 19, 20UKSFT16-L46-H15-W30-A35-ZG6-F13-P7
Add
Hole
Type		MBTapped Hole
Tapped Hole on the bottom of the receiving surface.
·MB6/MB8
·J dimension = 0.1 mm Increments
Ordering Code: MB6-J33		[NG] Tapped holes cannot be added within the W dimension range.

[NG] Combination with LPH/K is not possible.		UKSFT12-L46-H15-W30-A35-N7-F13-P7-MB6-J38
KAdd dowel hole
Dowel hole on the bottom of the receiver.
·K6/K8
·E dimension = 0.1 mm Increments
Ordering Code: K6-E33		[NG] Tapped holes cannot be added within the W dimension range.

[NG] Combination with LPH/MB is not possible.		UKSFT12-L46-H15-W30-A35-N7-F13-P7-K6-E38
CA/
CB/
CC/
CD/
CT		Chamfer
Receiving Piece (Flat) - 2-Hole Type: Related Image		Chamfer the receiving surface or bottom surface.
·Chamfer Location: Please select the required location from CA/CB/CC/CD/CT.
·Chamfer width specified: Specify 1, 3, 5 or 10.
Ordering Code: CA5		-UKSFT12-L46-H15-W30-A35-N7-F13-P7-CA1-CC3 
LPHThrough hole machining for locating pin
Receiving Piece (Flat) - 2-Hole Type: Related Image		A through hole for locating pin has been added to the shaded area of ​​the diagram, which includes the receiving surface of the workpiece.
·LPH = ø6 to ø14 0.5 mm Increments
·X dimension = 0.1 mm increments
Ordering Code: LPH7-X38		[ ! ] If the height of the receiving surface is greater than (ø × 8), misalignment within 0.2 mm will occur.

[NG] Combination with MB/K is not possible.		UKSFT12-L46-H15-W30-A35-N7-F13-P7-LPH7-X38 
ZKCHeight accuracy
Receiving Piece (Flat) - 2-Hole Type: Related Image		Changed the A Dimension tolerance A to ±0.03.
Ordering Code: ZKC		-UKSFT12-L46-H15-W30-A35-N7-F13-P7-ZKC 
VKMarking (V Groove)
Receiving Piece (Flat) - 2-Hole Type: Related Image		Add a marking line V groove to the receiving surface.
·V groove is 0.5 mm wide and 0.2 mm deep
·They are evenly spaced across the length/width of the receiving surface.
Ordering Code: VK		[ ! ] The width tolerance is ±0.2 and the depth tolerance is ±0.1.UKSFT12-L46-H15-W30-A35-N7-F13-P7-VK 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
UKCFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M6-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N7-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKNFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M6-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N7-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSFT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M6-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N7-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKUFT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness
(HRC) 		T Dim. Selection
(mm) 		1.L Dim. Specification
(mm) 		2.H Dim. Selection
(mm) 		3.W Dim. Specification
(mm) 		4.A Dim. Specification
(mm) 		5.Mounting Hole (Through Hole)[N] 6.Mounting Hole (Tapped Hole)[M] 7.Mounting Hole (Counterbored Hole)[ZG] 7.Mounting Hole (Counterbored Hole)[Z] 8.Mounting Hole Dimension[F]
(mm) 		9.Mounting Hole Dimension[P]
(mm)

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 1007---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.1206 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.1206 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 1007---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 1007---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10EN 1.4301 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100-6 ～ 8--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 1007 ～ 9---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100---6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -EN 1.4301 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 100--6 ～ 8-8 ～ 43.54.5 ～ 35.5

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Receiving Surface Shape Flat Mounting Hole Two Holes Single Item / R/L Set Single Item

Configure

Clear all

64Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • EN 1.0038 Equiv.
    • EN 1.1206 Equiv.
    • EN 1.4301 Equiv.

    Clear

  • Hardness(HRC)

    • Only End Face Hardened 55HRC –
    • No Hardening

    Clear

  • T Dim. Selection(mm)

    • 9
    • 12
    • 16
    • 19
    • 20

    Clear

  • 1.L Dim. Specification(mm)

     [29-70/1mm Unit(s)]

    Clear

  • 2.H Dim. Selection(mm)

    • 10
    • 12
    • 15
    • 20

    Clear

  • 3.W Dim. Specification(mm)

     [17-48/1mm Unit(s)]

    Clear

  • 4.A Dim. Specification(mm)

     [10-100/0.01mm Unit(s)]

    Clear

  • 5.Mounting Hole (Through Hole)[N]

    • 7
    • 9

    Clear

  • 6.Mounting Hole (Tapped Hole)[M]

    • 6
    • 8

    Clear

  • 7.Mounting Hole (Counterbored Hole)[ZG]

    • 6
    • 8

    Clear

  • 7.Mounting Hole (Counterbored Hole)[Z]

    • 6
    • 8

    Clear

  • 8.Mounting Hole Dimension[F](mm)

     [8-43.5/0.1mm Unit(s)]

    Clear

  • 9.Mounting Hole Dimension[P](mm)

     [4.5-35.5/0.1mm Unit(s)]

    Clear

  • Type

    • UKCFT
    • UKNFT
    • UKSFT
    • UKUFT

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.