• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Locators (Horizontally Inclined) Two Hole Type

Locators (Horizontally Inclined) Two Hole Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

[Features] Shape of mounting surface: Cross slope, fixing holes: This is a 2-circle positioning block.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image
[!]Height dimensional accuracy is a program guarantee of machining to the standard.
[!]The shaded area is the hardened area.
[!]The chamfer on the workpiece receiving surface is C0.5. The other chamfers will be slight chamfering of approximately C0.3.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m.
Type[M] Material[ H ] Hardness
Single ItemR/L Set
UKSHTUKS2HTEN 1.0038 Equiv.—
UKCHTUKC2HTEN 1.1206 Equiv.Partially hardened only at the tip 55HRC or higher
UKUHTUKU2HTEN 1.4301 Equiv.—

Specification Table

Part Number—L—H—W—A—B—N—F—P
UKS2HT16—L46—H15—W30—A35—B31.2—N9—F13—P7

 

■ Single Item

Part NumberL Configurable
1 mm Increments		H Selection *1W Configurable *2
1 mm Increments		A Specification *3
0.01 mm Increments		B Specification *3
0.01 mm Increments		N Selection
(Through Hole)		F Specification *4P Configurable *4
TypeT Selection
UKSHT
UKCHT
UKUHT		9
12
16
19
20		29 to 7010
12
15
20		17 to 5810 to 1007
9		Configurable
0.1 mm
Unit

* 1 H+1 ≤ (Min. value of A, B)
* 2 When (max. values ​​of A and B) ≤ 60, 10 ≤ L-W; When (max. values ​​of A, B) > 60, 12 ≤ L-W.
* 3 (Max. value of A, B) - (Min. value of A, B) ≤ 21
* 4 A minimum wall thickness of 1 mm is required around the hole machining.
■ R/L Set

Part NumberL Configurable
1 mm Increments		H Selection *1W Configurable *2
1 mm Increments		A Specification *3
0.01 mm Increments		B Specification *3
0.01 mm Increments		N Selection
(Through Hole)		F Specification *4P Configurable *4
TypeT Selection
UKS2HT
UKC2HT
UKU2HT		9
12
16
19
20		29 to 7010
12
15
20		17 to 5810 to 1007
9		Configurable
0.1 mm
Unit

* 1 H+1 ≤ (Min. value of A, B)
* 2 When (max. values ​​of A and B) ≤ 60, 10 ≤ L-W; When (max. values ​​of A, B) > 60, 12 ≤ L-W.
* 3 (Max. value of A, B) - (Min. value of A, B) ≤ 21
* 4 A minimum wall thickness of 1 mm is required around the hole machining.

Alterations

Alterations
Code		Alteration detailsApplicable conditionsOrdering example 
Change
hole
type		MTapped Hole
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Changed both through holes (N) to tapped holes.
·M6/M8
Ordering Code: N7→M6		-UKS2HT16-L46-H15-W30-A35-B31.2-M8-F13-P7

[ ! ] A minimum wall thickness of 1 mm is required around the holes machining for the alteration described on the left.

ZCounterbored Hole
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Changed both through holes (N) to counterbored holes.
·Z6/Z8
Ordering Code: N9→Z8
DimensionScrew Nominal Dia.
68
d·h79
d11114
[!]Only applicable to T = 16, 19, 20UKSHT16-L46-H15-W30-A35-B31.2-Z6-F13-P7
ZGCounterbored Hole (For spring washer)
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Changed both through holes (N) to counterbored holes (for spring washers).
·ZG6/ZG8
Ordering Code: N9→ZG8
DimensionScrew Nominal Dia.
68
d79
d11114
h811
[!]Only applicable to T = 16, 19, 20UKSHT16-L46-H15-W30-A35-B31.2-ZG6-F13-P7
Add
Hole
Type		MBTapped Hole
Tapped Hole on the bottom of the receiving surface.
·MB6/MB8
·J dimension = 0.1 mm Increments
Ordering Code: MB6-J33		[NG] Tapped holes cannot be added within the W dimension range.

[NG] Combination with LPH/K is not possible.		UKS2HT16-L46-H15-W30-A35-B31.2-N9-F13-P7-MB6-J38
KAdd dowel hole
Dowel hole on the bottom of the receiver.
·K6/K8
·E dimension = 0.1 mm Increments
Ordering Code: K6-E33		[NG] Tapped holes cannot be added within the W dimension range.

[NG] Combination with LPH/MB is not possible.		UKS2HT16-L46-H15-W30-A35-B31.2-N9-F13-P7-K6-E38
CA/
CB/
CC/
CD/
CT		Chamfer
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Chamfer the receiving surface or bottom surface.
·Chamfer Location: Please select the required location from CA/CB/CC/CD/CT.
·Chamfer width specified: Specify 1, 3, 5 or 10.
Ordering Code: CA5		-UKSHT16-L46-H15-W30-A35-B31.2-N9-F13-P7-CA3-CC3 
LPHThrough hole machining for locating pin
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		A through hole for locating pin has been added to the shaded area of ​​the diagram, which includes the receiving surface of the workpiece.
·LPH = ø6 to ø14 0.5 mm Increments
·X dimension = 0.1 mm increments
Ordering Code: LPH7-X33		[ ! ] If the height of the receiving surface is greater than (ø × 8), misalignment within 0.2 mm will occur.

[NG] Combination with MB/K is not possible.		UKSHT16-L46-H15-W30-A35-B31.2-N9-F13-P7-LPH7-X38 
ZKCHeight accuracy
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Changed the tolerance of A and B dimensions to ±0.03.
Ordering Code: ZKC		-UKSHT16-L46-H15-W30-A35-B31.2-N9-F13-P7-ZKC 
MRReversed
You will receive the reversed type of specified part number.
Ordering Code: MR		[ ! ] Only the reversed type will be delivered.

[ ! ] The chamfer location is also on the reversed side.		UKSHT16-L46-H15-W30-A35-B31.2-N9-F13-P7-MR 
VKMarking (V Groove)
Receiving Piece (Horizontal Gradient) - 2-Hole Type: Related Image		Add a marking line V groove to the receiving surface.
·V groove is 0.5 mm wide and 0.2 mm deep
·They are evenly spaced across the length/width of the receiving surface.
Ordering Code: VK		[ ! ] The width tolerance is ±0.2 and the depth tolerance is ±0.1.UKS2HT16-L46-H15-W30-A35-B31.2-N9-F13-P7-VK 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
UKC2HT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKC2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKCHT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKS2HT20-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT9-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT12-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT16-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-M[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-N[7,​9]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-Z[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
UKSHT19-L[29-70/1]-H[10,​12,​15,​20]-W[17-48/1]-A[10-100/0.01]-B[10-100/0.01]-ZG[6,​8]-F[8-43.5/0.1]-P[4.5-35.5/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSSingle Item / R/L Set Material Hardness
(HRC) 		T Dim. Selection
(mm) 		1.L Dim. Specification
(mm) 		2.H Dim. Selection
(mm) 		3.W Dim. Specification
(mm) 		4.A Dim. Specification
(mm) 		5.B Dim. Specification
(mm) 		6.Mounting Hole (Through Hole)[N] 7.Mounting Hole (Tapped Hole)[M] 8.Mounting Hole (Counterbored Hole)[Z] 9.Mounting Hole Dimension[F]
(mm) 		9.Mounting Hole Dimension[P]
(mm)

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.1206 Equiv.Only End Face Hardened 55HRC –2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -R/L SetEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10R/L SetEN 1.0038 Equiv.No Hardening2029 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1229 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days -Single ItemEN 1.0038 Equiv.No Hardening1629 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100-6 ～ 8-8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 1007 ～ 9--8 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100--6 ～ 88 ～ 43.54.5 ～ 35.5

-

1 7 Days 10Single ItemEN 1.0038 Equiv.No Hardening1929 ～ 7010 ～ 2017 ～ 4810 ～ 10010 ～ 100---8 ～ 43.54.5 ～ 35.5

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Receiving Surface Shape Horizontally Inclined Mounting Hole Two Holes

Configure

Clear all

96Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Single Item / R/L Set

    • R/L Set
    • Single Item

    Clear

  • Material

    • EN 1.0038 Equiv.
    • EN 1.1206 Equiv.
    • EN 1.4301 Equiv.

    Clear

  • Hardness(HRC)

    • Only End Face Hardened 55HRC –
    • No Hardening

    Clear

  • T Dim. Selection(mm)

    • 9
    • 12
    • 16
    • 19
    • 20

    Clear

  • 1.L Dim. Specification(mm)

     [29-70/1mm Unit(s)]

    Clear

  • 2.H Dim. Selection(mm)

    • 10
    • 12
    • 15
    • 20

    Clear

  • 3.W Dim. Specification(mm)

     [17-48/1mm Unit(s)]

    Clear

  • 4.A Dim. Specification(mm)

     [10-100/0.01mm Unit(s)]

    Clear

  • 5.B Dim. Specification(mm)

     [10-100/0.01mm Unit(s)]

    Clear

  • 6.Mounting Hole (Through Hole)[N]

    • 7
    • 9

    Clear

  • 7.Mounting Hole (Tapped Hole)[M]

    • 6
    • 8

    Clear

  • 8.Mounting Hole (Counterbored Hole)[Z]

    • 6
    • 8

    Clear

  • 9.Mounting Hole Dimension[F](mm)

     [8-43.5/0.1mm Unit(s)]

    Clear

  • 9.Mounting Hole Dimension[P](mm)

     [4.5-35.5/0.1mm Unit(s)]

    Clear

  • Type

    • UKC2HT
    • UKCHT
    • UKS2HT
    • UKSHT
    • UKU2HT
    • UKUHT

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.