• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

[Clean & Pack] Rotary Shaft - Straight

[Clean & Pack] Rotary Shaft - Straight

MISUMI

MISUMI

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
·Degreasing (Anti-rust single packing)　　　　: Part Number SL-□□
·Precision cleaning (Degassing double packing)　　　　: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing): Part Number SHD-□□
Product Part NumberCleaning MethodPackaging TypeEffects Compared to Uncleaned ProductEnvironment (Standard)Possible applications
SL-□□DegreasingAnti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
SH-□□Precision cleaningDegassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000*)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□Electrolytic polishing + precision cleaningDegassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000*)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Remark

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[Clean & Pack]Rotary Shaft - Straight: Related Image
[ ! ] Surface roughness of Part D for h9 (Cold-drawn) is [Clean & Pack]Rotary Shaft - Straight: Related Image. Surface roughness for h7 (Ground) and g6 (Ground) is [Clean & Pack]Rotary Shaft - Straight: Related Image.
■Circularity and Straightness
[Clean & Pack]Rotary Shaft - Straight: Related Image
[ ! ] Straightness of size D2, D2.5 is 0.1/100.
[ ! ] Circularity and straightness of Part D are not applicable to h9 (Cold-drawn).
■Circularity of Part D
DCircularity
M
overor Less
12.50.006
3130.004
13200.005
20400.006
40500.007
■Straightness
DStraightness
K
2·2.50.1
3·40.03
50.02
6 or more0.01
■ L Dimension Tolerance
DimensionDimension
Tolerance
overor Less
1430±0.2
30120±0.3
120400±0.5
4001000±0.8
TypeBody MaterialCleaning Method
D Tolerance
(1) h9 (Cold-drawn)(2) h7 (Ground)(3) g6 (Ground)[M] MaterialCleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SL-SSFMRSL-SSFHRSL-SSFREN 1.4301 Equiv.DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-SSFMRSH-SSFHRSH-SSFRPrecision cleaningClass 1,000*Degassing double packingClass 10**
SHD-SSFMRSHD-SSFHRSHD-SSFRElectrolytic polishing + precision cleaning
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number
—
L
SL-SSFR15
—
150
SH-SSFR20
—
300
SHD-SSFR30
—
500
(1) h9 (Cold-drawn)
Part NumberL
0.1 mm Increments
TypeDh9
SL-SSFMR
SH-SSFMR
SHD-SSFMR
(D13, 17, 18 or 22 is not available for SSFMR)		3   0
−0.025		15.0 to 150.0
4   0
−0.030		15.0 to 200.0
515.0 to 250.0
615.0 to 500.0
8   015.0 to 500.0
10−0.03615.0 to 800.0
12   0
−0.043		15.0 to 800.0
1515.0 to 800.0
1615.0 to 800.0
20   0
−0.052		20.0 to 800.0
2520.0 to 800.0
3020.0 to 800.0
35   0
−0.062		70.0 to 800.0
4080.0 to 800.0
50100.0 to 800.0
(2) h7 (Ground)
Part NumberL
0.1 mm Increments
TypeDh7


SL-SSFHR
SH-SSFHR
SHD-SSFHR		3   015.0 to 150.0
−0.010
4   0
−0.012		15.0 to 200.0
515.0 to 250.0
615.0 to 500.0
8   015.0 to 500.0
10−0.01515.0 to 800.0
12   0
−0.018		15.0 to 800.0
1515.0 to 800.0
1720.0 to 800.0
20   0
−0.021		20.0 to 800.0
2520.0 to 800.0
3020.0 to 800.0
35   0
−0.025		70.0 to 800.0
4080.0 to 800.0
50100.0 to 800.0
(3) g6 (Ground)
Part NumberL
0.1 mm Increments
TypeDg6


SL-SSFR
SH-SSFR
SHD-SSFR		2−0.002
−0.008		15.0 to 50.0
2.515.0 to 50.0
315.0 to 150.0
4−0.004
−0.012		15.0 to 200.0
515.0 to 250.0
615.0 to 500.0
8−0.00515.0 to 500.0
10−0.01415.0 to 800.0
12−0.006
−0.017		15.0 to 800.0
1315.0 to 800.0
1515.0 to 800.0
1615.0 to 800.0
1720.0 to 800.0
1820.0 to 800.0
20−0.007
−0.020		20.0 to 800.0
2220.0 to 800.0
2520.0 to 800.0
3020.0 to 800.0
35−0.009
−0.025		70.0 to 800.0
4080.0 to 800.0
50100.0 to 800.0

Alterations

Part Number—L—(KC, WKC, FC, etc.)
SL-SSFMR30—250—KC20 － A10
Alterations
Code		Alteration DetailsApplicable ConditionsOrdering Example
KC
Keyway at one location
Rotary Shaft - Straight: Related Image
KC, A = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable		SL−SSFMR30−250−KC50−A10
WKCKeyways at two locations
Rotary Shaft - Straight: Related Image		WKC, C, K, E = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100
[NG] ø5 or less is not applicable		SL−SSFMR30−250−WKC5−C20−K5−E10
KZKeyway at one location (for 4th location)
Rotary Shaft - Straight: Related Image		KZ, Z = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Keyway length ≤ 100 [NG] ø5 or less is not applicable
[ ! ] Can be specified only when combined with both KC and WKC		SL−SSFMR30−250−KC5−A10−WKC20−C10
−K60−E10−KZ100−Z10
FCSet screw flat at one location
Rotary Shaft - Straight: Related Image		FC, G = 1 mm Increments
[ ! ] ø2·2.5 is not applicable [ ! ] G ≤ 70
* See here for H		SL−SSFMR30−250−FC10−G3
WFCSet screw flats at two locations
Rotary Shaft - Straight: Related Image		WFC, J, W, V = 1 mm Increments
[ ! ] ø2·2.5 is not applicable [ ! ] J·V ≤ 70
* See here for H		SL−SSFMR30−250−WFC10−J15−W10−V20
SFCSet Screw Flat, 2 Set Screw Flats (Angle Specified)
Rotary Shaft - Straight: Related Image		SFC, SG = 1 mm Increments AG = 15° Increments
[ ! ] ø2·2.5 is not applicable [ ! ] SG ≤ 70
* See here for H		SL−SSFMR30−250−SFC10−SG3−AG120
KWCSet Screw Flat, 2 Set Screw Flats on Both Ends
Rotary Shaft - Straight: Related Image		KWC = 1 mm Increments
[NG] ø6 or less, 13, 16, 17, 18 or 22 are not applicable
[NG] L > 680 is not applicable
* See here for W		SL−SSFMR30−250−KWC10
WCSet screw flat, chamfering depth configurable
Rotary Shaft - Straight: Related Image
WC = 0.1 mm Increments
[NG] ø6 or less, 13, 16, 17, 18 or 22 are not applicable
[NG] L > 680 is not applicable
[ ! ] WC can be specified only when KWC is specified
DWC
84.0 to 6.9
105.0 to 7.9
126.0 to 8.9
159.0 to 11.9
2013.0 to 15.9
2517.0 to 19.9
3022.0 to 24.9
3527.0 to 29.9
4032.0 to 34.9
5042.0 to 44.9
SL−SSFMR30−250−KWC10−WC22.0
TA·TBRetaining Ring Groove
Rotary Shaft - Straight: Related Image		TA, TB = 0.1 mm Increments
[ ! ]2 ≤ TA·TB ≤ 150
If both TA and TB are specified, this (retaining ring grooves on both ends) is available.		SL−SSFMR30−250−TA10
UCSlit Cam Groove
Rotary Shaft - Straight: Related Image		UC = 1 mm Increments
[NG] ø2·2.5, D13 or higher is not applicable
* See here for d·ℓ1		SL−SSFMR10−250−UC10
LKCL Dimension Tolerance Change
Rotary Shaft - Straight: Related Image		L < 500···L±0.05 L ≥ 500···L±0.1
[NG] L800 or more is not applicable		SL−SSFMR30−250−LKC
SCWrench Flats
Rotary Shaft - Straight: Related Image		SC = 1 mm Increments
[NG] D5 or less is not applicable
* See here for W·ℓ2		SL−SSFMR30−250−SC10
CDChange of Part D Chamfering
Rotary Shaft - Straight: Related Image
Change the size of Part D chamfering　
* Select CD from the table
[ ! ] Only values provided on the Applicable Dia. Table are applicable
Chamfering (CD)Applicable Dia. (D)
C2⌀6 to ⌀50
C3⌀8 to ⌀50
C4⌀10 to ⌀50
C5⌀12 to ⌀50
SL−SSFMR30−250−CD3
[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Keyway Dimensions
Shaft Dia.btr
Reference DimensionTolerance (N9)Reference DimensionTolerance
6 to 72   -0.004
   -0.029		1.2 +0.1
   0		0.08 to 0.16
8 to 1031.8
11 to 124    0
   -0.03		2.5
13 to 1753.00.16 to 0.25
18 to 2263.5
23 to 308    0
   -0.036		4.0 +0.2
   0
31 to 38105.00.25 to 0.4
39 to 4412    0
   -0.043		5.0
45 to 50145.5
 
[Clean & Pack]Rotary Shaft - Straight: Related Image
[ ! ] b ≤ A, E, C ≤ 100
[ ! ] If 3 keyways are required, use both KC and WKC.
[!] If 4 keyways are required, use KC, WKC, and KZ. (KZ is applicable only when combined with both KC and WKC)
[NG] Not applicable to D = 2 to 5.
[ ! ] The example below shows the keyway shape for the specs KC, WKC, K = 0, KC + A ≥ L and WKC + C + K + E > L.
[Clean & Pack]Rotary Shaft - Straight: Related Image
[ ! ] Although keyway(s) and set screw flats are added in the same plane, ±2 degree phase differential may occur.
[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.
[Clean & Pack]Rotary Shaft - Straight: Related Image
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
21.2 +0.06
    0		0.4 +0.05
    0		JIS E Type 1.2
2.51.50.5JIS E Type 1.5
32JIS E Type 2
430.7 +0.1
    0		JIS E Type 3
54 +0.075
    0		JIS E Type 4
65JIS E Type 5
760.9JIS E Type 6
87 +0.09
    0		JIS E Type 7
98JIS E Type 8
109.60/－0.091.15 +0.14
    0		JIS C Type 10
1110.5   0
  -0.11		JIS C Type 11
1211.5JIS C Type 12
1312.4JIS C Type 13
1413.4JIS C Type 14
1514.3JIS C Type 15
1615.2JIS C Type 16
1716.2JIS C Type 17
18171.35JIS C Type 18
1918JIS C Type 19
 
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
2019  0
 -0.21		1.35 +0.14
    0		JIS C Type 20
2120JIS C Type 21
2221JIS C Type 22
2322JIS C Type 23
2422.9JIS C Type 24
2523.9JIS C Type 25
2624.9JIS C Type 26
2826.61.65JIS C Type 28
2927.6JIS C Type 29
3028.6JIS C Type 30
3230.3  0
 -0.25		JIS C Type 32
3533JIS C Type 35
40381.9JIS C Type 40
4542.5JIS C Type 45
50472.2JIS C Type 50
 
[Clean & Pack]Rotary Shaft - Straight: Related Image
[ ! ]2 ≤ TA·TB ≤ 150
[ ! ] An applicable retaining ring is included in the retaining ring groove.
Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment


Alkaline warm pure water
 
 		        
Ultrasonic pure water cleaning
after cleaning with pure water
*3 times
Dry
 
 
Anti-rust single packing
 
 
·Precision cleaning (Part Number: SH-□□)
 

Working Environment: Class 1,000*

 

Working Environment: Class 10**


Hydrocarbon cleaning
Ro water cleaning

 
After high-pressure water jet cleaning (Ro water)
Wash with pure water (10 MΩ·cm)
 
Use pure water (13 MΩ·cm)

 
Use nitrogen blow


 
Conducted on a clean bench in a Class 10** clean environment

 
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment: Class 1,000*

 

Working Environment: Class 10**


Hydrocarbon cleaning
Ro water cleaning

 

 
Electrolytic polishing with an electrolytic polishing layer according to the material

 
After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)

 
Use warm pure water (13 MΩ·cm)

 

 
Use nitrogen blow


 

 
Conducted on a clean bench in a Class 10** clean environment
 
*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Packaging Example
For degreasing:
(Part Number: SL-□□)
For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Possible applications

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000*)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000*)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
SH-SSFHR3-[15-150/0.1]
SH-SSFHR4-[15-200/0.1]
SH-SSFHR5-[15-250/0.1]
SH-SSFHR6-[15-500/0.1]
SH-SSFHR8-[15-500/0.1]
SH-SSFHR10-[15-800/0.1]
SH-SSFHR12-[15-800/0.1]
SH-SSFHR15-[15-800/0.1]
SH-SSFHR17-[20-800/0.1]
SH-SSFHR20-[20-800/0.1]
SH-SSFHR25-[20-800/0.1]
SH-SSFHR30-[20-800/0.1]
SH-SSFHR35-[70-800/0.1]
SH-SSFHR40-[80-800/0.1]
SH-SSFHR50-[100-800/0.1]
SH-SSFMR3-[15-150/0.1]
SH-SSFMR4-[15-200/0.1]
SH-SSFMR5-[15-250/0.1]
SH-SSFMR6-[15-500/0.1]
SH-SSFMR8-[15-500/0.1]
SH-SSFMR10-[15-800/0.1]
SH-SSFMR12-[15-800/0.1]
SH-SSFMR15-[15-800/0.1]
SH-SSFMR16-[15-800/0.1]
SH-SSFMR20-[20-800/0.1]
SH-SSFMR25-[20-800/0.1]
SH-SSFMR30-[20-800/0.1]
SH-SSFMR35-[70-800/0.1]
SH-SSFMR40-[80-800/0.1]
SH-SSFMR50-[100-800/0.1]
SH-SSFR2-[15-50/0.1]
SH-SSFR2.5-[15-50/0.1]
SH-SSFR3-[15-150/0.1]
SH-SSFR4-[15-800/0.1]
SH-SSFR5-[15-250/0.1]
SH-SSFR6-[15-500/0.1]
SH-SSFR8-[15-500/0.1]
SH-SSFR10-[15-800/0.1]
SH-SSFR12-[15-800/0.1]
SH-SSFR13-[15-800/0.1]
SH-SSFR15-[15-800/0.1]
SH-SSFR16-[15-800/0.1]
SH-SSFR17-[20-800/0.1]
SH-SSFR18-[20-800/0.1]
SH-SSFR20-[20-800/0.1]
SH-SSFR22-[20-800/0.1]
SH-SSFR25-[20-800/0.1]
SH-SSFR30-[20-800/0.1]
SH-SSFR35-[70-800/0.1]
SH-SSFR40-[80-800/0.1]
SH-SSFR50-[100-800/0.1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
D Tolerance Shaft Dia. D
(mm) 		Length L
(mm) 		Cleaning Method
1 9 Days h7 (Ground)315 ～ 150Precision Cleaning
1 9 Days h7 (Ground)415 ～ 200Precision Cleaning
1 9 Days h7 (Ground)515 ～ 250Precision Cleaning
1 9 Days h7 (Ground)615 ～ 500Precision Cleaning
1 9 Days h7 (Ground)815 ～ 500Precision Cleaning
1 9 Days h7 (Ground)1015 ～ 800Precision Cleaning
1 9 Days h7 (Ground)1215 ～ 800Precision Cleaning
1 9 Days h7 (Ground)1515 ～ 800Precision Cleaning
1 9 Days h7 (Ground)1720 ～ 800Precision Cleaning
1 9 Days h7 (Ground)2020 ～ 800Precision Cleaning
1 9 Days h7 (Ground)2520 ～ 800Precision Cleaning
1 9 Days h7 (Ground)3020 ～ 800Precision Cleaning
1 9 Days h7 (Ground)3570 ～ 800Precision Cleaning
1 9 Days h7 (Ground)4080 ～ 800Precision Cleaning
1 9 Days h7 (Ground)50100 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)315 ～ 150Precision Cleaning
1 9 Days h9 (Cold-drawn)415 ～ 200Precision Cleaning
1 9 Days h9 (Cold-drawn)515 ～ 250Precision Cleaning
1 9 Days h9 (Cold-drawn)615 ～ 500Precision Cleaning
1 9 Days h9 (Cold-drawn)815 ～ 500Precision Cleaning
1 9 Days h9 (Cold-drawn)1015 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)1215 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)1515 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)1615 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)2020 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)2520 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)3020 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)3570 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)4080 ～ 800Precision Cleaning
1 9 Days h9 (Cold-drawn)50100 ～ 800Precision Cleaning
1 9 Days g6 (Ground)215 ～ 50Precision Cleaning
1 9 Days g6 (Ground)2.515 ～ 50Precision Cleaning
1 9 Days g6 (Ground)315 ～ 150Precision Cleaning
1 9 Days g6 (Ground)415 ～ 800Precision Cleaning
1 9 Days g6 (Ground)515 ～ 250Precision Cleaning
1 9 Days g6 (Ground)615 ～ 500Precision Cleaning
1 9 Days g6 (Ground)815 ～ 500Precision Cleaning
1 9 Days g6 (Ground)1015 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1215 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1315 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1515 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1615 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1720 ～ 800Precision Cleaning
1 9 Days g6 (Ground)1820 ～ 800Precision Cleaning
1 9 Days g6 (Ground)2020 ～ 800Precision Cleaning
1 9 Days g6 (Ground)2220 ～ 800Precision Cleaning
1 9 Days g6 (Ground)2520 ～ 800Precision Cleaning
1 9 Days g6 (Ground)3020 ～ 800Precision Cleaning
1 10 Days g6 (Ground)3570 ～ 800Precision Cleaning
1 10 Days g6 (Ground)4080 ～ 800Precision Cleaning
1 10 Days g6 (Ground)50100 ～ 800Precision Cleaning

Loading...

  1. 1

Basic information

Basic Shape Straight Environmentally friendly RoHS Compliant (10 Substances) End Shape (Left) Straight
Characteristics/Applications Clean Washed End Shape (Right) Straight Material EN 1.4301 Equiv.
Hardness No Hardened Surface Treatment NA Material Details EN 1.4301 Equiv.
Keyway Keyway Option (Alteration) Wrench Flats Wrench flats option (alteration)

Configure

Clear all

51Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • D Tolerance

    • h9 (Cold-drawn)
    • h7 (Ground)
    • g6 (Ground)

    Clear

  • Shaft Dia. D(mm)

    • 2
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Length L(mm)

     [15-800/0.1mm Unit(s)]

    Clear

  • Type

    • SH-SSFHR
    • SH-SSFMR
    • SH-SSFR
    • SHD-SSFHR
    • SHD-SSFMR
    • SHD-SSFR
    • SL-SSFHR
    • SL-SSFMR
    • SL-SSFR

    Clear

  • Cleaning Method

    • Degreasing
    • Precision Cleaning
    • Electrolytic Polishing + Precision Cleaning

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 10 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.