Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Remark

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers

O.D. D

ø10 or Less 0 0.5 mm
ø12 or More 0 -0.8 mm

Free Length L

50 or Less ±1.5 mm
55 or More ±2.5 mm

Closed Ends (Both Ends Not Ground*)

Closed Ends (Both Ends Ground)

Type				Body Material	Cleaning Method
Max. Deflection (Fmax.)				Body Material	Cleaning Method
F = L × 70%	F = L × 75%	F = L × 60%	F = L × 45%	[M] Material	Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-UV	SL-UY	SL-UR	SL-UF	EN 1.4301 Equiv. (WPB) (Spring constant ±10%)	Degreasing	General environment	Anti-rust packing	General environment
SH-UV	SH-UY	SH-UR	SH-UF		Precision cleaning	Class 1,000*	Degassing double packing	Class 10**
SHD-UV	SHD-UY	SHD-UR	SHD-UF		Electrolytic polishing + precision cleaning	Class 1,000*	Degassing double packing	Class 10**

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[!] Maximum deflection differs from above for some sizes. See the specification table for details.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.

Specification Table

Part Number

SL-UY4-25

SH-UR13-60

SHD-UF8-70

■UV: Fmax. (allowable deflection) = L × Fa%

Part Number			d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UV SH-UV SHD-UV	3−	5	0.15	1.1	4	0.18 {0.018}	70
		10	0.18	2.5	7	0.35 {0.036}
		15	0.18	2.5	11	0.53 {0.054}
		20	0.20	3.3	14	0.70 {0.071}
		25	0.23	6.2	18	0.88 {0.089}
		30	0.23	6.2	21	1.05 {0.107}
	4−	5	0.18	1.2	4	0.18 {0.018}
		10	0.20	1.7	7	0.35 {0.036}
		15	0.23	3.0	11	0.53 {0.054}
		20	0.23	3.0	14	0.70 {0.071}
		25	0.26	4.9	18	0.88 {0.089}
		30	0.26	4.9	21	1.05 {0.107}
	5−	5	0.20	1.2	4	0.18 {0.018}
		10	0.23	1.8	7	0.35 {0.036}
		15	0.26	2.9	11	0.53 {0.054}
		20	0.29	4.5	14	0.70 {0.071}
		25	0.29	4.5	18	0.88 {0.089}
		30	0.29	4.5	21	1.05 {0.107}
	6−	10	0.26	2.0	7	0.35 {0.036}
		15	0.30	3.3	11	0.53 {0.054}
		20	0.30	3.3	14	0.70 {0.071}
		25	0.35	6.5	18	0.88 {0.089}
		30	0.35	6.5	21	1.05 {0.107}
		35	0.35	6.5	25	1.23 {0.125}
		40	0.35	6.5	28	1.40 {0.143}
	8−	10	0.30	1.9	7	0.35 {0.036}
		15	0.35	3.2	11	0.53 {0.054}
		20	0.35	3.2	14	0.70 {0.071}
		25	0.40	5.6	18	0.88 {0.089}
		30	0.40	5.6	21	1.05 {0.107}
		35	0.40	5.6	25	1.23 {0.125}
		40	0.45	9.3	28	1.40 {0.143}
		45	0.45	9.3	32	1.58 {0.161}
		50	0.45	9.3	35	1.75 {0.179}
	10−	10	0.35	2.2	7	0.35 {0.036}
		15	0.40	3.4	11	0.53 {0.054}
		20	0.40	3.4	14	0.70 {0.071}
		25	0.45	5.4	18	0.88 {0.090}
		30	0.45	5.4	21	1.05 {0.107}
		35	0.50	8.4	25	1.23 {0.125}
		40	0.50	8.4	28	1.40 {0.143}
		45	0.55	12.8	32	1.58 {0.161}
		50	0.55	12.8	35	1.75 {0.179}

[!] Both ends of UV, UY Type springs are not ground. [!] Usage Count: 1 million times

■UY: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	2-5	0.13	1.5	3	0.15 {0.015}	60
	10	0.13	1.5	6	0.29 {0.03}
	15	0.15	2.7	9	0.44 {0.045}
	20	0.15	2.7	12	0.59 {0.06}
	25	0.18	6.3	15	0.74 {0.075}
	30	0.18	6.3	18	0.88 {0.09}
	3-5	0.16	0.92	3.75	0.37 {0.0375}	75
	10	0.2	2	7.5	0.74 {0.075}
	15	0.23	3.45	11.25	1.10 {0.1125}
	20	0.23	3.45	15	1.47 {0.15}
	25	0.26	6.24	15	1.47 {0.15}	60
	30	0.26	6.24	18	1.77 {0.18}	60
	4-5	0.2	1.05	3.75	0.37 {0.0375}	75
	10	0.23	1.84	7.5	0.74 {0.075}
	15	0.26	2.86	11.25	1.10 {0.1125}
	20	0.29	4.64	15	1.47 {0.15}
	25	0.3	5.4	18.75	1.84 {0.1875}
	30	0.3	5.4	22.5	2.26 {0.23}
	5-5	0.23	1.15	3.75	0.37 {0.0375}	75
	10	0.26	1.82	7.5	0.74 {0.075}
	15	0.3	3.15	11.25	1.10 {0.1125}
	20	0.3	3.15	15	1.47 {0.15}
	25	0.32	4.16	18.75	1.84 {0.1875}
	30	0.32	4.16	22.5	2.26 {0.23}
	35	0.35	6	26.25	2.55 {0.26}
	40	0.35	6	30	2.94 {0.3}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UY SH-UY SHD-UY	6-5	0.26	1.24	3.5	0.34 {0.035}	70
	10	0.3	2.1	7.5	0.74 {0.075}	75
	15	0.32	2.64	11.25	1.10 {0.1125}
	20	0.35	3.85	15	1.47 {0.15}
	25	0.38	5.32	18.75	1.84 {0.1875}
	30	0.4	6.8	22.5	2.21 {0.225}
	35	0.4	6.8	26.25	2.55 {0.26}
	40	0.4	6.8	30	2.94 {0.3}
	8-10	0.35	2.19	7.5	0.74 {0.075}	75
	15	0.4	3.4	11.25	1.10 {0.1125}
	20	0.4	3.4	15	1.47 {0.15}
	25	0.45	5.4	18.75	1.84 {0.1875}
	30	0.45	5.4	22.5	2.21 {0.225}
	35	0.5	8.3	26.25	2.55 {0.26}
	40	0.5	8.3	30	2.94 {0.3}
	45	0.5	8.3	33.75	3.33 {0.34}
	50	0.55	12.7	35	3.43 {0.35}	70
	10-10	0.5	3.25	6	1.18 {0.12}	60
	15	0.5	3.25	11.25	2.21 {0.225}	75
	20	0.55	4.4	15	2.94 {0.3}
	25	0.55	4.4	18.75	3.68 {0.375}
	30	0.6	6.15	22.5	4.41 {0.45}
	35	0.6	6.3	26.25	5.10 {0.52}
	40	0.6	6.3	30	5.88 {0.6}
	45	0.65	8.45	33.75	6.62 {0.675}
	50	0.65	8.45	37.5	7.35 {0.75}
	12-15	0.55	3.3	11.25	2.206 {0.225}	75
	20	0.55	3.3	15	2.942 {0.3}
	25	0.6	4.2	18.75	3.68 {0.375}
	30	0.65	5.53	22.5	4.41 {0.45}
	35	0.65	5.53	26.25	5.15 {0.525}
	40	0.7	7.35	30	5.88 {0.6}
	45	0.7	7.35	33.75	6.62 {0.675}
	50	0.7	7.35	37.5	7.35 {0.75}
	60	0.8	13.6	45	8.83 {0.9}
	70	0.8	13.6	52.5	10.30 {1.05}
	80	0.8	13.6	60	11.77 {1.2}
	13-15	0.6	3.75	10.5	2.06 {0.21}	70
	20	0.6	3.75	15	2.94 {0.3}	75
	25	0.65	4.9	18.75	3.68 {0.375}
	30	0.65	4.9	22.5	4.41 {0.45}
	35	0.7	6.3	26.25	5.15 {0.525}
	40	0.75	8.25	30	5.88 {0.6}
	45	0.75	8.25	33.75	6.62 {0.675}
	50	0.8	11.2	37.5	7.35 {0.75}
	60	0.8	11.2	45	8.83 {0.9}
	70	0.85	14.45	52.5	10.30 {1.05}
	80	0.85	14.45	60	11.77 {1.2}
	16-15	0.7	4.2	9	1.77 {0.18}	60
	20	0.7	4.2	15	2.94 {0.3}	75
	25	0.7	4.2	18.75	3.68 {0.375}
	30	0.75	5.44	22.5	4.41 {0.45}
	35	0.8	6.8	26.25	5.15 {0.525}
	40	0.8	6.8	30	5.88 {0.6}
	45	0.85	8.5	33.75	6.62 {0.675}
	50	0.9	10.8	37.5	7.35 {0.75}
	60	0.9	10.8	45	8.83 {0.9}
	70	1	17	52.5	10.30 {1.05}
	80	1	17	60	11.77 {1.2}
	20-20	0.9	5.4	12	3.53 {0.36}	60
	25	0.9	5.4	18.75	5.49 {0.56}	75
	30	0.9	5.4	22.5	6.62 {0.675}
	35	1	7.5	26.25	7.65 {0.78}
	40	1	7.5	30	8.83 {0.9}
45	1	7.5	33.75	9.90 {1.01}
50	1.1	11	37.5	11.03 {1.125}
60	1.1	11	45	13.24 {1.35}
70	1.2	15.6	52.5	15.45 {1.58}
80	1.2	15.6	60	17.65 {1.8}

[ ! ] Both ends of UY Type springs are not ground.
[!] Usage Count: 1 million times

■UR: Fmax. (allowable deflection) = L × Fa%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	2-5	0.18	2	2.5	0.49 {0.05}	50
	10	0.18	2	5	0.98 {0.1}
	15	0.23	6	7.5	1.5 {0.15}
	20	0.23	6	10	2.0 {0.2}
	25	0.26	11.2	12.5	2.5 {0.25}
	30	0.26	11.2	15	2.9 {0.3}
	3-5	0.23	1.6	3	0.9 {0.09}	60
	10	0.25	2.1	6	1.8 {0.18}
	15	0.3	4.5	9	2.6 {0.27}
	20	0.3	4.5	12	3.5 {0.36}
	25	0.32	6.4	15	4.4 {0.45}
	30	0.32	6.4	18	5.3 {0.54}
	35	0.35	9.8	21	6.2 {0.63}
	40	0.35	9.8	24	7.1 {0.72}
	4-5	0.26	1.4	3	0.9 {0.09}	60
	10	0.29	2	6	1.8 {0.18}
	15	0.32	3	9	2.6 {0.27}
	20	0.38	6.1	12	3.5 {0.36}
	25	0.38	6.1	15	4.4 {0.45}
	30	0.4	8	18	5.3 {0.54}
	35	0.4	8	21	6.2 {0.63}
	40	0.45	14.4	24	7.1 {0.72}
	45	0.45	14.4	27	7.9 {0.81}
	50	0.45	14.4	30	8.8 {0.9}
	60	0.5	23	36	10.6 {1.08}
	5-5	0.3	1.65	3	0.9 {0.09}	60
	10	0.35	2.71	6	1.8 {0.18}
	15	0.38	3.61	9	2.6 {0.27}
	20	0.38	3.61	12	3.5 {0.36}
	25	0.45	7.43	15	4.4 {0.45}
	30	0.45	7.43	18	5.3 {0.54}
	35	0.5	12.25	21	6.2 {0.63}
	40	0.5	12.25	24	7.1 {0.72}
	45	0.5	12.25	27	7.9 {0.81}
	50	0.55	19.53	30	8.8 {0.9}
	60	0.55	19.53	36	10.6 {1.08}
	6-5	0.32	1.5	3	0.9 {0.09}	60
	10	0.4	3	6	1.8 {0.18}
	15	0.4	3	9	2.6 {0.27}
	20	0.5	7	12	3.5 {0.36}
	25	0.5	7	15	4.4 {0.45}
	30	0.5	7	18	5.3 {0.54}
	35	0.55	11	21	6.2 {0.63}
	40	0.55	11	24	7.1 {0.72}
	45	0.6	17.4	27	7.9 {0.81}
	50	0.6	17.4	30	8.8 {0.9}
	60	0.65	23.4	36	10.6 {1.08}
	70	0.65	23.4	42	12.4 {1.26}
	8-10	0.45	2.6	6	1.8 {0.18}	60
	15	0.5	3.6	9	2.6 {0.27}
	20	0.5	3.6	12	3.5 {0.36}
	25	0.55	5.9	15	4.4 {0.45}
	30	0.65	10.4	18	5.3 {0.54}
	35	0.65	10.4	21	6.2 {0.63}
	40	0.7	15.4	24	7.1 {0.72}
	45	0.75	21	22	6.3 {0.66}	50
	50	0.75	21	27	7.8 {0.81}	55
	60	0.8	27.6	31	8.9 {0.93}	52
	70	0.8	27.6	40	11.6 {1.20}	57
	80	0.8	27.6	48	14.1 {1.44}	60

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.	Fa%
SL-UR SH-UR SHD-UR	10-10	0.55	3.3	6	1.8 {0.18}	60
	15	0.6	4.2	9	2.6 {0.27}
	20	0.65	6.2	12	3.5 {0.36}
	25	0.65	6.2	15	4.4 {0.45}
	30	0.7	8.4	18	5.3 {0.54}
	35	0.7	8.4	21	6.2 {0.63}
	40	0.7	8.4	24	7.1 {0.72}
	45	0.8	15.2	27	7.9 {0.81}
	50	0.8	15.2	30	8.8 {0.9}
	60	0.85	20.4	36	10.6 {1.08}
	70	0.85	20.4	42	12.4 {1.26}
	80	0.85	20.4	48	14.1 {1.44}
	12-15	0.6	3.5	9	2.6 {0.27}	60
	20	0.7	5.6	12	3.5 {0.36}
	25	0.7	5.6	15	4.4 {0.45}
	30	0.8	9.6	18	5.3 {0.54}
	35	0.8	9.6	21	6.2 {0.63}
	40	0.8	9.6	24	7.1 {0.72}
	45	0.9	16.2	27	7.9 {0.81}
	50	0.9	16.2	30	8.8 {0.9}
	60	0.9	16.2	36	10.6 {1.08}
	70	1	26	42	12.4 {1.26}
	80	1	26	48	14.1 {1.44}
	13-15	0.7	4.7	9	2.6 {0.27}	60
	20	0.7	4.7	12	3.5 {0.36}
	25	0.8	8	15	4.4 {0.45}
	30	0.8	8	18	5.3 {0.54}
	35	0.8	8	21	6.2 {0.63}
	40	0.9	12.8	24	7.1 {0.72}
	45	0.9	12.8	27	7.9 {0.81}
	50	0.9	12.8	30	8.8 {0.9}
	60	1	21	36	10.6 {1.08}
	70	1	21	42	12.4 {1.26}
	80	1	21	48	14.1 {1.44}
	16-15	0.75	4.3	9	2.6 {0.27}	60
	20	0.8	5.4	12	3.5 {0.36}
	25	0.9	7.7	15	4.4 {0.45}
	30	0.9	7.7	18	5.3 {0.54}
	35	1	12	21	6.2 {0.63}
	40	1	12	24	7.1 {0.72}
	45	1	12	27	7.9 {0.81}
	50	1.1	19	30	8.8 {0.9}
	60	1.1	19	36	10.6 {1.08}
	70	1.2	26.4	42	12.4 {1.26}
	80	1.2	26.4	48	14.1 {1.44}
	20-20	1	6	12	5.9 {0.6}	60
	25	1.1	7.7	15	7.4 {0.75}
	30	1.1	7.7	18	8.8 {0.9}
	35	1.2	10.8	21	10.3 {1.05}
	40	1.2	10.8	24	11.8 {1.2}
	45	1.3	14.3	27	13.2 {1.35}
	50	1.3	14.3	30	14.7 {1.5}
	60	1.4	19.6	36	17.7 {1.8}
	70	1.4	19.6	42	20.6 {2.1}
	80	1.5	27	48	23.5 {2.4}

[ ! ] Both ends of UR Type springs are not ground.
[!] Usage Count: 1 million times

■UF: Fmax. (allowable deflection) = L × 45%

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	2-5*	0.2	2.35	2.25	0.66 {0.068}
	10*	0.2	2.35	4.5	1.3 {0.14}
	15*	0.26	7.8	6.7	2.0 {0.20}
	20*	0.26	7.8	9	2.7 {0.27}
	25*	0.29	13.6	11.2	3.3 {0.34}
	30*	0.29	13.6	13.5	4.0 {0.41}
	3-5*	0.26	1.8	2.25	1.1 {0.11}
	10*	0.32	4.5	4.5	2.2 {0.22}
	15*	0.32	4.5	6.7	3.2 {0.33}
	20*	0.35	6.3	9	4.4 {0.45}
	25*	0.35	6.3	11.2	5.5 {0.56}
	30*	0.4	12.4	13.5	6.6 {0.67}
	35*	0.4	12.4	15.7	7.6 {0.78}
	40*	0.4	12.4	18	8.8 {0.9}
	4-5*	0.32	2	2.25	1.1 {0.11}
	10*	0.35	3	4.5	2.2 {0.22}
	15*	0.4	5.2	6.7	3.2 {0.33}
	20*	0.4	5.2	9	4.4 {0.45}
	25*	0.45	9.5	11.2	5.5 {0.56}
	30*	0.45	9.5	13.5	6.6 {0.67}
	35*	0.5	15.5	15.7	7.6 {0.78}
	40*	0.5	15.5	18	8.8 {0.9}
	45*	0.5	15.5	20	9.8 {1}
	50*	0.5	15.5	22.5	10.8 {1.1}
	60*	0.55	22.6	27	12.7 {1.3}
	5-5*	0.35	2.01	2.25	1.1 {0.11}
	10*	0.4	3.2	4.5	2.2 {0.23}
	15*	0.4	3.2	6.75	3.3 {0.34}
	20*	0.45	4.95	9	4.4 {0.45}
	25*	0.45	4.95	11.25	5.5 {0.56}
	30*	0.5	7.75	13.5	6.7 {0.68}
	35*	0.5	7.75	15.75	7.7 {0.79}
	40	0.6	19.5	18	8.8 {0.9}
	45	0.6	19.5	20.25	10 {1.01}
	50	0.6	19.5	22.5	11.2 {1.13}
	60	0.65	27.95	27	13.4 {1.35}
	6-5*	0.4	2.2	2.25	1.1 {0.11}
	10*	0.5	5	4.5	2.2 {0.22}
	15*	0.55	7.7	6.7	3.2 {0.33}
	20*	0.55	7.7	9	4.4 {0.45}
	25	0.6	10.8	11.2	5.5 {0.56}
	30	0.65	15.6	13.5	6.6 {0.67}
	35	0.65	15.6	15.7	7.6 {0.78}
	40	0.65	15.6	18	8.8 {0.9}
	45	0.65	15.6	20	9.8 {1}
	50	0.7	23.1	22.5	10.8 {1.1}
	60	0.7	23.1	27	12.7 {1.3}
	70	0.75	30.8	31.5	14.7 {1.5}
	8-10	0.6	5.4	4.5	2.2 {0.22}
	15	0.65	7.2	6.7	3.2 {0.33}
	20	0.7	10.5	9	4.4 {0.45}
	25	0.7	10.5	11.2	5.5 {0.56}
	30	0.75	13.5	13.5	6.6 {0.67}
	35	0.75	13.5	15.7	7.6 {0.78}
	40	0.8	18.4	18	8.8 {0.9}
	45	0.8	18.4	20	9.8 {1}
	50	0.8	18.4	22.5	10.8 {1.1}
	60	0.85	26.4	27	12.7 {1.3}
	70	0.85	26.4	31.5	14.7 {1.5}
	80	0.85	26.4	36	17.7 {1.8}

Part Number		d	Solid Length (Reference Value)	F max.	N{kgf} max.
Type	D−L	d	Solid Length (Reference Value)	F max.	N{kgf} max.
SL-UF SH-UF SHD-UF	10-10	0.65	4.6	4.5	2.2 {0.22}
	15	0.65	4.6	6.7	3.2 {0.33}
	20	0.8	9.6	9	4.4 {0.45}
	25	0.8	9.6	11.2	5.5 {0.56}
	30	0.85	12.8	13.5	6.6 {0.67}
	35	0.85	12.8	15.7	7.6 {0.78}
	40	0.9	17	18	8.8 {0.9}
	45	0.9	17	20	9.8 {1}
	50	0.9	17	22.5	10.8 {1.1}
	60	1	28	27	12.7 {1.3}
	70	1	28	31.5	14.7 {1.5}
	80	1	28	36	17.7 {1.8}
	12-15	0.8	6.8	6.7	3.2 {0.33}
	20	0.8	6.8	9	4.4 {0.45}
	25	0.8	6.8	11.2	5.5 {0.56}
	30	0.9	10.8	13.5	6.6 {0.67}
	35	1	17	15.7	7.6 {0.78}
	40	1	17	18	8.8 {0.9}
	45	1	17	20	9.8 {1}
	50	1.1	26.4	22.5	10.8 {1.1}
	60	1.1	26.4	27	12.7 {1.3}
	70	1.1	26.4	31.5	14.7 {1.5}
	80	1.2	39.6	36	17.7 {1.8}
	13-15	0.8	5.6	6.7	3.2 {0.33}
	20	0.8	5.6	9	4.4 {0.45}
	25	0.85	7.2	11.2	5.5 {0.56}
	30	1	14	13.5	6.6 {0.67}
	35	1	14	15.7	7.6 {0.78}
	40	1	14	18	8.8 {0.9}
	45	1.1	21.5	20	9.8 {1}
	50	1.1	21.5	22.5	10.8 {1.1}
	60	1.1	21.5	27	12.7 {1.3}
	70	1.2	30	31.5	14.7 {1.5}
	80	1.2	30	36	17.7 {1.8}
	16-15	0.9	5.6	6.7	3.2 {0.33}
	20	1	7.7	9	4.4 {0.45}
	25	1	7.7	11.2	5.5 {0.56}
	30	1.1	12.1	13.5	6.6 {0.67}
	35	1.1	12.1	15.7	7.6 {0.78}
	40	1.2	18	18	8.8 {0.9}
	45	1.2	18	20	9.8 {1}
	50	1.2	18	22.5	10.8 {1.1}
	60	1.3	26	27	12.7 {1.3}
	70	1.3	26	31.5	14.7 {1.5}
	80	1.4	35	36	17.7 {1.8}
	20-20	1.2	7.2	9	8.8 {0.9}
	25	1.3	9.1	11.3	11.1 {1.13}
	30	1.4	11.9	13.5	13.2 {1.35}
	35	1.4	11.9	15.8	15.5 {1.58}
	40	1.5	15.8	18	17.7 {1.8}
	45	1.5	15.8	20.3	19.9 {2.03}
	50	1.6	20.8	22.5	22.1 {2.25}
	60	1.6	20.8	27	26.5 {2.7}
	70	1.7	26.4	31.5	30.9 {3.15}
	80	1.7	26.4	36	35.3 {3.6}

[ ! ] Both ends of * marked UF Type springs are not ground.
[!] Usage Count: 1 million times

kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf]=N × 0.101972

● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.

[!] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).

■Spring Constant (N/mm) [kgf/mm]
[ ! ] D12 is applicable to UY, UR, and UF Types only.

Type

SL-UV

SL-UY

SL-UR

SL-UF

SL-UM

SL-UH

SH-UV

SH-UY

SH-UR

SH-UF

SH-UM

SH-UH

SHD-UV

SHD-UY

SHD-UR

SHD-UF

SHD-UM

SHD-UH

0.05 {0.005}

0.2 {0.02}

0.3 {0.03}

0.05
{0.005}

0.098
{0.01}

0.29
{0.03}

0.49
{0.05}

2
{0.2}

2.9 {0.3}

2.9
{0.3}

5.9
{0.6}

0.2
{0.02}

9.8
{1.0}

0.3 {0.03}

0.5 {0.05}

0.98 {0.1}

4.9 {0.5}

14.7 {1.5}

Fmax.

F = L × 70%

F = L × Fa%

F = L × 45%

F = L × Fa%

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000*				Working Environment: Class 10**
Hydrocarbon cleaning Ro water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10** clean environment

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000*				Working Environment: Class 10**
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10** clean environment

*US FED STD 209E, ISO 14644-1 ISO 6 Equiv.
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Possible applications
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000*)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000*)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

*US FED STD 209E, ISO 14644-1 ISO 4 to ISO 6 Equiv.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
SH-UF2-5
SH-UF2-10
SH-UF2-15
SH-UF2-20
SH-UF2-25
SH-UF2-30
SH-UF3-5
SH-UF3-10
SH-UF3-15
SH-UF3-20
SH-UF3-25
SH-UF3-30
SH-UF3-35
SH-UF3-40
SH-UF4-5
SH-UF4-10
SH-UF4-15
SH-UF4-20
SH-UF4-25
SH-UF4-30
SH-UF4-35
SH-UF4-40
SH-UF4-45
SH-UF4-50
SH-UF4-60
SH-UF5-5
SH-UF5-10
SH-UF5-15
SH-UF5-20
SH-UF5-25
SH-UF5-30
SH-UF5-35
SH-UF5-40
SH-UF5-45
SH-UF5-50
SH-UF5-60
SH-UF6-5
SH-UF6-10
SH-UF6-15
SH-UF6-20
SH-UF6-25
SH-UF6-30
SH-UF6-35
SH-UF6-40
SH-UF6-45
SH-UF6-50
SH-UF6-60
SH-UF6-70
SH-UF8-10
SH-UF8-15
SH-UF8-20
SH-UF8-25
SH-UF8-30
SH-UF8-35
SH-UF8-40
SH-UF8-45
SH-UF8-50
SH-UF8-60
SH-UF8-70
SH-UF8-80

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Allowable Load (Configurable Range) (N)	Max. Load (N)	Free Length L (mm)	Outer Dia. D (or D1) (mm)	Spring Constant (N/mm)	Wire Dia. (mm)	Solid Length (mm)	Cleaning Method	Tolerance Change	Allowable Deflection (mm)	End Face Condition	Height At Maximum Load (free length - allowable deflection) (mm)
6.95 €	1	Available	7 Days	Up to 1.50	0.66	5	2	0.3	0.2	2.35	Precision Cleaning	No grinding	2.25	No Grinding	2.75
6.95 €	1	Available	7 Days	Up to 1.50	1.3	10	2	0.3	0.2	2.35	Precision Cleaning	No grinding	4.5	No Grinding	5.5
6.95 €	1	Available	7 Days	1.51 to 4.50	2	15	2	0.3	0.26	7.8	Precision Cleaning	No grinding	6.7	No Grinding	8.3
6.95 €	1	Available	7 Days	1.51 to 4.50	2.7	20	2	0.3	0.26	7.8	Precision Cleaning	No grinding	9	No Grinding	11
7.77 €	1	Available	7 Days	1.51 to 4.50	3.3	25	2	0.3	0.29	13.6	Precision Cleaning	No grinding	11.2	No Grinding	13.8
7.77 €	1	Available	7 Days	1.51 to 4.50	4	30	2	0.3	0.29	13.6	Precision Cleaning	No grinding	13.5	No Grinding	16.5
5.15 €	1	Available	7 Days	Up to 1.50	1.1	5	3	0.49	0.26	1.8	Precision Cleaning	No grinding	2.25	No Grinding	2.75
5.15 €	1	Available	7 Days	1.51 to 4.50	2.2	10	3	0.49	0.32	4.5	Precision Cleaning	No grinding	4.5	No Grinding	5.5
5.15 €	1	Available	7 Days	1.51 to 4.50	3.2	15	3	0.49	0.32	4.5	Precision Cleaning	No grinding	6.7	No Grinding	8.3
5.15 €	1	Available	7 Days	1.51 to 4.50	4.4	20	3	0.49	0.35	6.3	Precision Cleaning	No grinding	9	No Grinding	11
5.40 €	1	Available	7 Days	4.51 to 8.50	5.5	25	3	0.49	0.35	6.3	Precision Cleaning	No grinding	11.2	No Grinding	13.8
5.40 €	1	Available	7 Days	4.51 to 8.50	6.6	30	3	0.49	0.4	12.4	Precision Cleaning	No grinding	13.5	No Grinding	16.5
5.40 €	1	Available	7 Days	4.51 to 8.50	7.6	35	3	0.49	0.4	12.4	Precision Cleaning	No grinding	15.7	No Grinding	19.3
5.40 €	1	Available	7 Days	8.51 to 16.00	8.8	40	3	0.49	0.4	12.4	Precision Cleaning	No grinding	18	No Grinding	22
5.40 €	1	Available	7 Days	Up to 1.50	1.1	5	4	0.49	0.32	2	Precision Cleaning	No grinding	2.25	No Grinding	2.75
5.40 €	1	Available	7 Days	1.51 to 4.50	2.2	10	4	0.49	0.35	3	Precision Cleaning	No grinding	4.5	No Grinding	5.5
5.40 €	1	Available	7 Days	1.51 to 4.50	3.2	15	4	0.49	0.4	5.2	Precision Cleaning	No grinding	6.7	No Grinding	8.3
5.40 €	1	Available	7 Days	1.51 to 4.50	4.4	20	4	0.49	0.4	5.2	Precision Cleaning	No grinding	9	No Grinding	11
5.40 €	1	Available	7 Days	4.51 to 8.50	5.5	25	4	0.49	0.45	9.5	Precision Cleaning	No grinding	11.2	No Grinding	13.8
5.40 €	1	Available	7 Days	4.51 to 8.50	6.6	30	4	0.49	0.45	9.5	Precision Cleaning	No grinding	13.5	No Grinding	16.5
5.40 €	1	Available	7 Days	4.51 to 8.50	7.6	35	4	0.49	0.5	15.5	Precision Cleaning	No grinding	15.7	No Grinding	19.3
5.40 €	1	Available	7 Days	8.51 to 16.00	8.8	40	4	0.49	0.5	15.5	Precision Cleaning	No grinding	18	No Grinding	22
5.40 €	1	Available	7 Days	8.51 to 16.00	9.8	45	4	0.49	0.5	15.5	Precision Cleaning	No grinding	20	No Grinding	25
5.40 €	1	Available	7 Days	8.51 to 16.00	10.8	50	4	0.49	0.5	15.5	Precision Cleaning	No grinding	22.52	No Grinding	27.5
5.40 €	1	Available	7 Days	8.51 to 16.00	12.7	60	4	0.49	0.55	22.6	Precision Cleaning	No grinding	27	No Grinding	33
5.40 €	1	Available	7 Days	Up to 1.50	1.1	5	5	0.49	0.35	2.01	Precision Cleaning	No grinding	2.25	No Grinding	2.75
5.40 €	1	Available	7 Days	1.51 to 4.50	2.2	10	5	0.49	0.4	3.2	Precision Cleaning	No grinding	4.5	No Grinding	5.5
5.40 €	1	Available	7 Days	1.51 to 4.50	3.3	15	5	0.49	0.4	3.2	Precision Cleaning	No grinding	6.75	No Grinding	8.25
5.40 €	1	Available	7 Days	1.51 to 4.50	4.4	20	5	0.49	0.45	4.95	Precision Cleaning	No grinding	9	No Grinding	11
5.48 €	1	Available	7 Days	4.51 to 8.50	5.5	25	5	0.49	0.45	4.95	Precision Cleaning	No grinding	11.25	No Grinding	13.75
5.48 €	1	Available	7 Days	4.51 to 8.50	6.7	30	5	0.49	0.5	7.75	Precision Cleaning	No grinding	13.5	No Grinding	16.5
5.48 €	1	Available	7 Days	4.51 to 8.50	7.7	35	5	0.49	0.5	7.75	Precision Cleaning	No grinding	15.75	No Grinding	19.25
5.48 €	1	Available	7 Days	8.51 to 16.00	8.8	40	5	0.49	0.6	19.5	Precision Cleaning	With grinding	18	With Grinding	22
5.48 €	1	Available	7 Days	8.51 to 16.00	10	45	5	0.49	0.6	19.5	Precision Cleaning	With grinding	20.25	With Grinding	24.75
5.48 €	1	Available	7 Days	8.51 to 16.00	11.2	50	5	0.49	0.6	19.5	Precision Cleaning	With grinding	22.5	With Grinding	27.5
5.73 €	1	Available	7 Days	8.51 to 16.00	13.4	60	5	0.49	0.65	27.95	Precision Cleaning	With grinding	27	With Grinding	33
5.40 €	1	Available	7 Days	Up to 1.50	1.1	5	6	0.49	0.4	2.2	Precision Cleaning	No grinding	2.25	No Grinding	2.75
5.40 €	1	Available	7 Days	1.51 to 4.50	2.2	10	6	0.49	0.5	5	Precision Cleaning	No grinding	4.5	No Grinding	5.5
5.40 €	1	Available	7 Days	1.51 to 4.50	3.2	15	6	0.49	0.55	7.7	Precision Cleaning	No grinding	6.7	No Grinding	8.3
5.40 €	1	Available	7 Days	1.51 to 4.50	4.4	20	6	0.49	0.55	7.7	Precision Cleaning	No grinding	9	No Grinding	11
5.48 €	1	Available	7 Days	4.51 to 8.50	5.5	25	6	0.49	0.6	10.8	Precision Cleaning	With grinding	11.2	With Grinding	13.8
5.48 €	1	Available	7 Days	4.51 to 8.50	6.6	30	6	0.49	0.65	15.6	Precision Cleaning	With grinding	13.5	With Grinding	16.5
5.48 €	1	Available	7 Days	4.51 to 8.50	7.6	35	6	0.49	0.65	15.6	Precision Cleaning	With grinding	15.7	With Grinding	19.3
5.48 €	1	Available	7 Days	8.51 to 16.00	8.8	40	6	0.49	0.65	15.6	Precision Cleaning	With grinding	18	With Grinding	22
5.48 €	1	Available	7 Days	8.51 to 16.00	9.8	45	6	0.49	0.65	15.6	Precision Cleaning	With grinding	20	With Grinding	25
5.48 €	1	Available	7 Days	8.51 to 16.00	10.8	50	6	0.49	0.7	23.1	Precision Cleaning	With grinding	22.5	With Grinding	27.5
5.73 €	1	Available	7 Days	8.51 to 16.00	12.7	60	6	0.49	0.7	23.1	Precision Cleaning	With grinding	27	With Grinding	33
5.73 €	1	Available	7 Days	8.51 to 16.00	14.7	70	6	0.49	0.75	30.8	Precision Cleaning	With grinding	31.5	With Grinding	38.5
5.73 €	1	Available	7 Days	1.51 to 4.50	2.2	10	8	0.49	0.6	5.4	Precision Cleaning	With grinding	4.5	With Grinding	5.5
5.73 €	1	Available	7 Days	1.51 to 4.50	3.2	15	8	0.49	0.65	7.2	Precision Cleaning	With grinding	6.7	With Grinding	8.3
5.73 €	1	Available	7 Days	1.51 to 4.50	4.4	20	8	0.49	0.7	10.5	Precision Cleaning	With grinding	9	With Grinding	11
5.80 €	1	Available	7 Days	4.51 to 8.50	5.5	25	8	0.49	0.7	10.5	Precision Cleaning	With grinding	11.2	With Grinding	13.8
5.80 €	1	Available	7 Days	4.51 to 8.50	6.6	30	8	0.49	0.75	13.5	Precision Cleaning	With grinding	13.5	With Grinding	16.5
5.80 €	1	Available	7 Days	4.51 to 8.50	7.6	35	8	0.49	0.75	13.5	Precision Cleaning	With grinding	15.7	With Grinding	19.3
5.80 €	1	Available	7 Days	8.51 to 16.00	8.8	40	8	0.49	0.8	18.4	Precision Cleaning	With grinding	18	With Grinding	22
5.80 €	1	Available	7 Days	8.51 to 16.00	9.8	45	8	0.49	0.8	18.4	Precision Cleaning	With grinding	20	With Grinding	25
5.80 €	1	Available	7 Days	8.51 to 16.00	10.8	50	8	0.49	0.8	18.4	Precision Cleaning	With grinding	22.5	With Grinding	27.5
5.80 €	1	Available	7 Days	8.51 to 16.00	12.7	60	8	0.49	0.85	26.4	Precision Cleaning	With grinding	27	With Grinding	33
5.80 €	1	Available	7 Days	8.51 to 16.00	14.7	70	8	0.49	0.85	26.4	Precision Cleaning	With grinding	31.5	With Grinding	38.5
5.80 €	1	Available	7 Days	16.01 to 30.00	17.7	80	8	0.49	0.85	26.4	Precision Cleaning	With grinding	36	With Grinding	44

1
2
3
4
5
Next >>

Basic information

Material	EN 1.4301 (WPB) Equiv.	Type	Round Wire	Properties / applications	Clean washing
Environmentally Friendly	RoHS compliant (10 substances)

Configure

1,104Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Allowable Load (Configurable Range)(N)
- Up to 1.50
- 1.51 to 4.50
- 4.51 to 8.50
- 8.51 to 16.00
- 16.01 to 30.00
- 30.01 to 50.00
Clear
Max. Load(N)
0.15

0.18

0.29

0.34

0.35

0.37

0.44

0.49

0.525

0.53

0.59

0.66

0.7

0.74

0.875

0.88

0.9

0.98

1.05

1.1

1.18

1.225

1.23

1.3

1.4

1.47

1.5

1.575

1.58

1.75

1.77

1.8

1.84

2

2.06

2.2

2.206

2.21

2.26

2.5

2.55

2.6

2.7

2.9

2.94

2.942

3.2

3.3

3.33

3.43

3.5

3.53

3.68

4

4.4

4.41

5.1

5.15

5.3

5.49

5.5

5.88

5.9

6.2

6.3

6.6

6.62

6.7

7.1

7.35

7.4

7.6

7.65

7.7

7.8

7.9

8.8

8.83

8.9

9.8

9.9

10

10.3

10.6

10.8

11.03

11.1

11.2

11.6

11.77

11.8

12.4

12.7

13.2

13.24

13.4

14.1

14.7

15.45

15.5

17.65

17.7

19.9

20.6

22.1

23.5

26.5

30.9

35.3
Clear
Free Length L(mm)
5

10

15

20

25

30

35

40

45

50

60

70

80
Clear
Outer Dia. D (or D1)(mm)
2

3

4

5

6

8

10

12

13

16

20
Clear
Spring Constant(N/mm)
0.05

0.098

0.2

0.29

0.3

0.49

0.5

0.98
Clear
Wire Dia.(mm)
0.13

0.15

0.16

0.18

0.2

0.23

0.25

0.26

0.29

0.3

0.32

0.35

0.38

0.4

0.45

0.5

0.55

0.6

0.65

0.7

0.75

0.8

0.85

0.9

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7
Clear
Solid Length(mm)
0.92

1.05

1.1

1.15

1.2

1.24

1.4

1.5

1.6

1.65

1.7

1.8

1.82

1.84

1.9

2

2.01

2.1

2.19

2.2

2.35

2.5

2.6

2.64

2.7

2.71

2.86

2.9

3

3.15

3.2

3.25

3.3

3.4

3.45

3.5

3.6

3.61

3.75

3.85

4.16

4.2

4.3

4.4

4.5

4.6

4.64

4.7

4.9

4.95

5

5.2

5.32

5.4

5.44

5.53

5.6

5.9

6

6.1

6.15

6.2

6.24

6.3

6.4

6.5

6.8

7

7.2

7.35

7.43

7.5

7.7

7.75

7.8

8

8.25

8.3

8.4

8.45

8.5

9.1

9.3

9.5

9.6

9.8

10.4

10.5

10.8

11

11.2

11.9

12

12.1

12.25

12.4

12.7

12.8

13.5

13.6

14

14.3

14.4

14.45

15.2

15.4

15.5

15.6

15.8

16.2

17

17.4

18

18.4

19

19.5

19.53

19.6

20.4

20.8

21

21.5

22.6

23

23.1

23.4

26

26.4

27

27.6

27.95

28

30

30.8

35

39.6
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
Clear
Tolerance Change
- No grinding
- With grinding
Clear
Allowable Deflection(mm)
2.25

2.5

3

3.5

3.75

4.5

5

6

6.7

6.75

7.5

9

10

10.5

11.2

11.25

11.3

12

12.5

13.5

15

15.7

15.75

15.8

18

18.75

20

20.25

20.3

21

22

22.5

22.52

24

26.25

27

30

31

31.5

33.75

35

36

37.5

40

42

45

48

52.5

60
Clear
End Face Condition
- No Grinding
- With Grinding
Clear
Height At Maximum Load (free length - allowable deflection)(mm)
1.25

1.5

2

2.5

2.75

3.75

4

4.5

5

5.5

6

6.25

7.5

8

8.25

8.3

8.75

10

11

11.25

12

12.5

13.7

13.75

13.8

14

15

16

16.5

17.5

18

19.2

19.25

19.3

20

22

23

24

24.7

24.75

25

27.5

28

29

30

32

33

38.5

44
Clear
Type
- SH-UF
- SH-UR
- SH-UV
- SH-UY
- SHD-UF
- SHD-UR
- SHD-UV
- SHD-UY
- SL-UF
- SL-UR
- SL-UV
- SL-UY
Clear
Filter by CAD data type
- 2D
- 3D
Clear