[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF (SH-UR12-20)
![[Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF SH-UR12-20](http://uk.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310666089_001.jpg?$product_main$)
- Volume Discount
Product Details:
Manufacturer part number: SH-UR12-20
Brand: MISUMI
Price: 6.46 €
Delivery time: 7 Days
Technical Data:
Allowable Load (Configurable Range): 1.51 to 4.50 N
Max. Load: 3.5 N
Free Length L: 20 mm
Outer Dia. D (or D1): 12 mm
Spring Constant: 0.29 N/mm
(i)Remark
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SH-UR12-20
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
O.D. D
ø10 or Less 0 0.5 mm
ø12 or More 0 -0.8 mm
50 or Less ±1.5 mm
55 or More ±2.5 mm
Closed Ends (Both Ends Not Ground*)
Closed Ends (Both Ends Ground)
| Type | Body Material | Cleaning Method | ||||||
| Max. Deflection (Fmax.) | ||||||||
| F = L × 70% | F = L × 75% | F = L × 60% | F = L × 45% | [M] Material | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment |
| SL-UV | SL-UY | SL-UR | SL-UF | EN 1.4301 Equiv. (WPB) (Spring constant ±10%) | Degreasing | General environment | Anti-rust packing | General environment |
| SH-UV | SH-UY | SH-UR | SH-UF | Precision cleaning | Class 1,000* | Degassing double packing | Class 10** | |
| SHD-UV | SHD-UY | SHD-UR | SHD-UF | Electrolytic polishing + precision cleaning | ||||
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[!] Maximum deflection differs from above for some sizes. See the specification table for details.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number |
| SL-UY4-25 |
| SH-UR13-60 |
| SHD-UF8-70 |
■UV: Fmax. (allowable deflection) = L × Fa%
[!] Both ends of UV, UY Type springs are not ground. [!] Usage Count: 1 million times
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | Fa% | ||
| Type | D−L | ||||||
| SL-UV SH-UV SHD-UV | 3− | 5 | 0.15 | 1.1 | 4 | 0.18 {0.018} | 70 |
| 10 | 0.18 | 2.5 | 7 | 0.35 {0.036} | |||
| 15 | 0.18 | 2.5 | 11 | 0.53 {0.054} | |||
| 20 | 0.20 | 3.3 | 14 | 0.70 {0.071} | |||
| 25 | 0.23 | 6.2 | 18 | 0.88 {0.089} | |||
| 30 | 0.23 | 6.2 | 21 | 1.05 {0.107} | |||
| 4− | 5 | 0.18 | 1.2 | 4 | 0.18 {0.018} | ||
| 10 | 0.20 | 1.7 | 7 | 0.35 {0.036} | |||
| 15 | 0.23 | 3.0 | 11 | 0.53 {0.054} | |||
| 20 | 0.23 | 3.0 | 14 | 0.70 {0.071} | |||
| 25 | 0.26 | 4.9 | 18 | 0.88 {0.089} | |||
| 30 | 0.26 | 4.9 | 21 | 1.05 {0.107} | |||
| 5− | 5 | 0.20 | 1.2 | 4 | 0.18 {0.018} | ||
| 10 | 0.23 | 1.8 | 7 | 0.35 {0.036} | |||
| 15 | 0.26 | 2.9 | 11 | 0.53 {0.054} | |||
| 20 | 0.29 | 4.5 | 14 | 0.70 {0.071} | |||
| 25 | 0.29 | 4.5 | 18 | 0.88 {0.089} | |||
| 30 | 0.29 | 4.5 | 21 | 1.05 {0.107} | |||
| 6− | 10 | 0.26 | 2.0 | 7 | 0.35 {0.036} | ||
| 15 | 0.30 | 3.3 | 11 | 0.53 {0.054} | |||
| 20 | 0.30 | 3.3 | 14 | 0.70 {0.071} | |||
| 25 | 0.35 | 6.5 | 18 | 0.88 {0.089} | |||
| 30 | 0.35 | 6.5 | 21 | 1.05 {0.107} | |||
| 35 | 0.35 | 6.5 | 25 | 1.23 {0.125} | |||
| 40 | 0.35 | 6.5 | 28 | 1.40 {0.143} | |||
| 8− | 10 | 0.30 | 1.9 | 7 | 0.35 {0.036} | ||
| 15 | 0.35 | 3.2 | 11 | 0.53 {0.054} | |||
| 20 | 0.35 | 3.2 | 14 | 0.70 {0.071} | |||
| 25 | 0.40 | 5.6 | 18 | 0.88 {0.089} | |||
| 30 | 0.40 | 5.6 | 21 | 1.05 {0.107} | |||
| 35 | 0.40 | 5.6 | 25 | 1.23 {0.125} | |||
| 40 | 0.45 | 9.3 | 28 | 1.40 {0.143} | |||
| 45 | 0.45 | 9.3 | 32 | 1.58 {0.161} | |||
| 50 | 0.45 | 9.3 | 35 | 1.75 {0.179} | |||
| 10− | 10 | 0.35 | 2.2 | 7 | 0.35 {0.036} | ||
| 15 | 0.40 | 3.4 | 11 | 0.53 {0.054} | |||
| 20 | 0.40 | 3.4 | 14 | 0.70 {0.071} | |||
| 25 | 0.45 | 5.4 | 18 | 0.88 {0.090} | |||
| 30 | 0.45 | 5.4 | 21 | 1.05 {0.107} | |||
| 35 | 0.50 | 8.4 | 25 | 1.23 {0.125} | |||
| 40 | 0.50 | 8.4 | 28 | 1.40 {0.143} | |||
| 45 | 0.55 | 12.8 | 32 | 1.58 {0.161} | |||
| 50 | 0.55 | 12.8 | 35 | 1.75 {0.179} | |||
■UY: Fmax. (allowable deflection) = L × Fa%
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | Fa% | |
| Type | D−L | |||||
| SL-UY SH-UY SHD-UY | 2-5 | 0.13 | 1.5 | 3 | 0.15 {0.015} | 60 |
| 10 | 0.13 | 1.5 | 6 | 0.29 {0.03} | ||
| 15 | 0.15 | 2.7 | 9 | 0.44 {0.045} | ||
| 20 | 0.15 | 2.7 | 12 | 0.59 {0.06} | ||
| 25 | 0.18 | 6.3 | 15 | 0.74 {0.075} | ||
| 30 | 0.18 | 6.3 | 18 | 0.88 {0.09} | ||
| 3-5 | 0.16 | 0.92 | 3.75 | 0.37 {0.0375} | 75 | |
| 10 | 0.2 | 2 | 7.5 | 0.74 {0.075} | ||
| 15 | 0.23 | 3.45 | 11.25 | 1.10 {0.1125} | ||
| 20 | 0.23 | 3.45 | 15 | 1.47 {0.15} | ||
| 25 | 0.26 | 6.24 | 15 | 1.47 {0.15} | 60 | |
| 30 | 0.26 | 6.24 | 18 | 1.77 {0.18} | ||
| 4-5 | 0.2 | 1.05 | 3.75 | 0.37 {0.0375} | 75 | |
| 10 | 0.23 | 1.84 | 7.5 | 0.74 {0.075} | ||
| 15 | 0.26 | 2.86 | 11.25 | 1.10 {0.1125} | ||
| 20 | 0.29 | 4.64 | 15 | 1.47 {0.15} | ||
| 25 | 0.3 | 5.4 | 18.75 | 1.84 {0.1875} | ||
| 30 | 0.3 | 5.4 | 22.5 | 2.26 {0.23} | ||
| 5-5 | 0.23 | 1.15 | 3.75 | 0.37 {0.0375} | 75 | |
| 10 | 0.26 | 1.82 | 7.5 | 0.74 {0.075} | ||
| 15 | 0.3 | 3.15 | 11.25 | 1.10 {0.1125} | ||
| 20 | 0.3 | 3.15 | 15 | 1.47 {0.15} | ||
| 25 | 0.32 | 4.16 | 18.75 | 1.84 {0.1875} | ||
| 30 | 0.32 | 4.16 | 22.5 | 2.26 {0.23} | ||
| 35 | 0.35 | 6 | 26.25 | 2.55 {0.26} | ||
| 40 | 0.35 | 6 | 30 | 2.94 {0.3} | ||
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | Fa% | |
| Type | D−L | |||||
| SL-UY SH-UY SHD-UY | 6-5 | 0.26 | 1.24 | 3.5 | 0.34 {0.035} | 70 |
| 10 | 0.3 | 2.1 | 7.5 | 0.74 {0.075} | 75 | |
| 15 | 0.32 | 2.64 | 11.25 | 1.10 {0.1125} | ||
| 20 | 0.35 | 3.85 | 15 | 1.47 {0.15} | ||
| 25 | 0.38 | 5.32 | 18.75 | 1.84 {0.1875} | ||
| 30 | 0.4 | 6.8 | 22.5 | 2.21 {0.225} | ||
| 35 | 0.4 | 6.8 | 26.25 | 2.55 {0.26} | ||
| 40 | 0.4 | 6.8 | 30 | 2.94 {0.3} | ||
| 8-10 | 0.35 | 2.19 | 7.5 | 0.74 {0.075} | 75 | |
| 15 | 0.4 | 3.4 | 11.25 | 1.10 {0.1125} | ||
| 20 | 0.4 | 3.4 | 15 | 1.47 {0.15} | ||
| 25 | 0.45 | 5.4 | 18.75 | 1.84 {0.1875} | ||
| 30 | 0.45 | 5.4 | 22.5 | 2.21 {0.225} | ||
| 35 | 0.5 | 8.3 | 26.25 | 2.55 {0.26} | ||
| 40 | 0.5 | 8.3 | 30 | 2.94 {0.3} | ||
| 45 | 0.5 | 8.3 | 33.75 | 3.33 {0.34} | ||
| 50 | 0.55 | 12.7 | 35 | 3.43 {0.35} | 70 | |
| 10-10 | 0.5 | 3.25 | 6 | 1.18 {0.12} | 60 | |
| 15 | 0.5 | 3.25 | 11.25 | 2.21 {0.225} | 75 | |
| 20 | 0.55 | 4.4 | 15 | 2.94 {0.3} | ||
| 25 | 0.55 | 4.4 | 18.75 | 3.68 {0.375} | ||
| 30 | 0.6 | 6.15 | 22.5 | 4.41 {0.45} | ||
| 35 | 0.6 | 6.3 | 26.25 | 5.10 {0.52} | ||
| 40 | 0.6 | 6.3 | 30 | 5.88 {0.6} | ||
| 45 | 0.65 | 8.45 | 33.75 | 6.62 {0.675} | ||
| 50 | 0.65 | 8.45 | 37.5 | 7.35 {0.75} | ||
| 12-15 | 0.55 | 3.3 | 11.25 | 2.206 {0.225} | 75 | |
| 20 | 0.55 | 3.3 | 15 | 2.942 {0.3} | ||
| 25 | 0.6 | 4.2 | 18.75 | 3.68 {0.375} | ||
| 30 | 0.65 | 5.53 | 22.5 | 4.41 {0.45} | ||
| 35 | 0.65 | 5.53 | 26.25 | 5.15 {0.525} | ||
| 40 | 0.7 | 7.35 | 30 | 5.88 {0.6} | ||
| 45 | 0.7 | 7.35 | 33.75 | 6.62 {0.675} | ||
| 50 | 0.7 | 7.35 | 37.5 | 7.35 {0.75} | ||
| 60 | 0.8 | 13.6 | 45 | 8.83 {0.9} | ||
| 70 | 0.8 | 13.6 | 52.5 | 10.30 {1.05} | ||
| 80 | 0.8 | 13.6 | 60 | 11.77 {1.2} | ||
| 13-15 | 0.6 | 3.75 | 10.5 | 2.06 {0.21} | 70 | |
| 20 | 0.6 | 3.75 | 15 | 2.94 {0.3} | 75 | |
| 25 | 0.65 | 4.9 | 18.75 | 3.68 {0.375} | ||
| 30 | 0.65 | 4.9 | 22.5 | 4.41 {0.45} | ||
| 35 | 0.7 | 6.3 | 26.25 | 5.15 {0.525} | ||
| 40 | 0.75 | 8.25 | 30 | 5.88 {0.6} | ||
| 45 | 0.75 | 8.25 | 33.75 | 6.62 {0.675} | ||
| 50 | 0.8 | 11.2 | 37.5 | 7.35 {0.75} | ||
| 60 | 0.8 | 11.2 | 45 | 8.83 {0.9} | ||
| 70 | 0.85 | 14.45 | 52.5 | 10.30 {1.05} | ||
| 80 | 0.85 | 14.45 | 60 | 11.77 {1.2} | ||
| 16-15 | 0.7 | 4.2 | 9 | 1.77 {0.18} | 60 | |
| 20 | 0.7 | 4.2 | 15 | 2.94 {0.3} | 75 | |
| 25 | 0.7 | 4.2 | 18.75 | 3.68 {0.375} | ||
| 30 | 0.75 | 5.44 | 22.5 | 4.41 {0.45} | ||
| 35 | 0.8 | 6.8 | 26.25 | 5.15 {0.525} | ||
| 40 | 0.8 | 6.8 | 30 | 5.88 {0.6} | ||
| 45 | 0.85 | 8.5 | 33.75 | 6.62 {0.675} | ||
| 50 | 0.9 | 10.8 | 37.5 | 7.35 {0.75} | ||
| 60 | 0.9 | 10.8 | 45 | 8.83 {0.9} | ||
| 70 | 1 | 17 | 52.5 | 10.30 {1.05} | ||
| 80 | 1 | 17 | 60 | 11.77 {1.2} | ||
| 20-20 | 0.9 | 5.4 | 12 | 3.53 {0.36} | 60 | |
| 25 | 0.9 | 5.4 | 18.75 | 5.49 {0.56} | 75 | |
| 30 | 0.9 | 5.4 | 22.5 | 6.62 {0.675} | ||
| 35 | 1 | 7.5 | 26.25 | 7.65 {0.78} | ||
| 40 | 1 | 7.5 | 30 | 8.83 {0.9} | ||
| 45 | 1 | 7.5 | 33.75 | 9.90 {1.01} | ||
| 50 | 1.1 | 11 | 37.5 | 11.03 {1.125} | ||
| 60 | 1.1 | 11 | 45 | 13.24 {1.35} | ||
| 70 | 1.2 | 15.6 | 52.5 | 15.45 {1.58} | ||
| 80 | 1.2 | 15.6 | 60 | 17.65 {1.8} | ||
[!] Usage Count: 1 million times
■UR: Fmax. (allowable deflection) = L × Fa%
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | Fa% | |
| Type | D−L | |||||
| SL-UR SH-UR SHD-UR | 2-5 | 0.18 | 2 | 2.5 | 0.49 {0.05} | 50 |
| 10 | 0.18 | 2 | 5 | 0.98 {0.1} | ||
| 15 | 0.23 | 6 | 7.5 | 1.5 {0.15} | ||
| 20 | 0.23 | 6 | 10 | 2.0 {0.2} | ||
| 25 | 0.26 | 11.2 | 12.5 | 2.5 {0.25} | ||
| 30 | 0.26 | 11.2 | 15 | 2.9 {0.3} | ||
| 3-5 | 0.23 | 1.6 | 3 | 0.9 {0.09} | 60 | |
| 10 | 0.25 | 2.1 | 6 | 1.8 {0.18} | ||
| 15 | 0.3 | 4.5 | 9 | 2.6 {0.27} | ||
| 20 | 0.3 | 4.5 | 12 | 3.5 {0.36} | ||
| 25 | 0.32 | 6.4 | 15 | 4.4 {0.45} | ||
| 30 | 0.32 | 6.4 | 18 | 5.3 {0.54} | ||
| 35 | 0.35 | 9.8 | 21 | 6.2 {0.63} | ||
| 40 | 0.35 | 9.8 | 24 | 7.1 {0.72} | ||
| 4-5 | 0.26 | 1.4 | 3 | 0.9 {0.09} | 60 | |
| 10 | 0.29 | 2 | 6 | 1.8 {0.18} | ||
| 15 | 0.32 | 3 | 9 | 2.6 {0.27} | ||
| 20 | 0.38 | 6.1 | 12 | 3.5 {0.36} | ||
| 25 | 0.38 | 6.1 | 15 | 4.4 {0.45} | ||
| 30 | 0.4 | 8 | 18 | 5.3 {0.54} | ||
| 35 | 0.4 | 8 | 21 | 6.2 {0.63} | ||
| 40 | 0.45 | 14.4 | 24 | 7.1 {0.72} | ||
| 45 | 0.45 | 14.4 | 27 | 7.9 {0.81} | ||
| 50 | 0.45 | 14.4 | 30 | 8.8 {0.9} | ||
| 60 | 0.5 | 23 | 36 | 10.6 {1.08} | ||
| 5-5 | 0.3 | 1.65 | 3 | 0.9 {0.09} | 60 | |
| 10 | 0.35 | 2.71 | 6 | 1.8 {0.18} | ||
| 15 | 0.38 | 3.61 | 9 | 2.6 {0.27} | ||
| 20 | 0.38 | 3.61 | 12 | 3.5 {0.36} | ||
| 25 | 0.45 | 7.43 | 15 | 4.4 {0.45} | ||
| 30 | 0.45 | 7.43 | 18 | 5.3 {0.54} | ||
| 35 | 0.5 | 12.25 | 21 | 6.2 {0.63} | ||
| 40 | 0.5 | 12.25 | 24 | 7.1 {0.72} | ||
| 45 | 0.5 | 12.25 | 27 | 7.9 {0.81} | ||
| 50 | 0.55 | 19.53 | 30 | 8.8 {0.9} | ||
| 60 | 0.55 | 19.53 | 36 | 10.6 {1.08} | ||
| 6-5 | 0.32 | 1.5 | 3 | 0.9 {0.09} | 60 | |
| 10 | 0.4 | 3 | 6 | 1.8 {0.18} | ||
| 15 | 0.4 | 3 | 9 | 2.6 {0.27} | ||
| 20 | 0.5 | 7 | 12 | 3.5 {0.36} | ||
| 25 | 0.5 | 7 | 15 | 4.4 {0.45} | ||
| 30 | 0.5 | 7 | 18 | 5.3 {0.54} | ||
| 35 | 0.55 | 11 | 21 | 6.2 {0.63} | ||
| 40 | 0.55 | 11 | 24 | 7.1 {0.72} | ||
| 45 | 0.6 | 17.4 | 27 | 7.9 {0.81} | ||
| 50 | 0.6 | 17.4 | 30 | 8.8 {0.9} | ||
| 60 | 0.65 | 23.4 | 36 | 10.6 {1.08} | ||
| 70 | 0.65 | 23.4 | 42 | 12.4 {1.26} | ||
| 8-10 | 0.45 | 2.6 | 6 | 1.8 {0.18} | 60 | |
| 15 | 0.5 | 3.6 | 9 | 2.6 {0.27} | ||
| 20 | 0.5 | 3.6 | 12 | 3.5 {0.36} | ||
| 25 | 0.55 | 5.9 | 15 | 4.4 {0.45} | ||
| 30 | 0.65 | 10.4 | 18 | 5.3 {0.54} | ||
| 35 | 0.65 | 10.4 | 21 | 6.2 {0.63} | ||
| 40 | 0.7 | 15.4 | 24 | 7.1 {0.72} | ||
| 45 | 0.75 | 21 | 22 | 6.3 {0.66} | 50 | |
| 50 | 0.75 | 21 | 27 | 7.8 {0.81} | 55 | |
| 60 | 0.8 | 27.6 | 31 | 8.9 {0.93} | 52 | |
| 70 | 0.8 | 27.6 | 40 | 11.6 {1.20} | 57 | |
| 80 | 0.8 | 27.6 | 48 | 14.1 {1.44} | 60 | |
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | Fa% | |
| Type | D−L | |||||
| SL-UR SH-UR SHD-UR | 10-10 | 0.55 | 3.3 | 6 | 1.8 {0.18} | 60 |
| 15 | 0.6 | 4.2 | 9 | 2.6 {0.27} | ||
| 20 | 0.65 | 6.2 | 12 | 3.5 {0.36} | ||
| 25 | 0.65 | 6.2 | 15 | 4.4 {0.45} | ||
| 30 | 0.7 | 8.4 | 18 | 5.3 {0.54} | ||
| 35 | 0.7 | 8.4 | 21 | 6.2 {0.63} | ||
| 40 | 0.7 | 8.4 | 24 | 7.1 {0.72} | ||
| 45 | 0.8 | 15.2 | 27 | 7.9 {0.81} | ||
| 50 | 0.8 | 15.2 | 30 | 8.8 {0.9} | ||
| 60 | 0.85 | 20.4 | 36 | 10.6 {1.08} | ||
| 70 | 0.85 | 20.4 | 42 | 12.4 {1.26} | ||
| 80 | 0.85 | 20.4 | 48 | 14.1 {1.44} | ||
| 12-15 | 0.6 | 3.5 | 9 | 2.6 {0.27} | 60 | |
| 20 | 0.7 | 5.6 | 12 | 3.5 {0.36} | ||
| 25 | 0.7 | 5.6 | 15 | 4.4 {0.45} | ||
| 30 | 0.8 | 9.6 | 18 | 5.3 {0.54} | ||
| 35 | 0.8 | 9.6 | 21 | 6.2 {0.63} | ||
| 40 | 0.8 | 9.6 | 24 | 7.1 {0.72} | ||
| 45 | 0.9 | 16.2 | 27 | 7.9 {0.81} | ||
| 50 | 0.9 | 16.2 | 30 | 8.8 {0.9} | ||
| 60 | 0.9 | 16.2 | 36 | 10.6 {1.08} | ||
| 70 | 1 | 26 | 42 | 12.4 {1.26} | ||
| 80 | 1 | 26 | 48 | 14.1 {1.44} | ||
| 13-15 | 0.7 | 4.7 | 9 | 2.6 {0.27} | 60 | |
| 20 | 0.7 | 4.7 | 12 | 3.5 {0.36} | ||
| 25 | 0.8 | 8 | 15 | 4.4 {0.45} | ||
| 30 | 0.8 | 8 | 18 | 5.3 {0.54} | ||
| 35 | 0.8 | 8 | 21 | 6.2 {0.63} | ||
| 40 | 0.9 | 12.8 | 24 | 7.1 {0.72} | ||
| 45 | 0.9 | 12.8 | 27 | 7.9 {0.81} | ||
| 50 | 0.9 | 12.8 | 30 | 8.8 {0.9} | ||
| 60 | 1 | 21 | 36 | 10.6 {1.08} | ||
| 70 | 1 | 21 | 42 | 12.4 {1.26} | ||
| 80 | 1 | 21 | 48 | 14.1 {1.44} | ||
| 16-15 | 0.75 | 4.3 | 9 | 2.6 {0.27} | 60 | |
| 20 | 0.8 | 5.4 | 12 | 3.5 {0.36} | ||
| 25 | 0.9 | 7.7 | 15 | 4.4 {0.45} | ||
| 30 | 0.9 | 7.7 | 18 | 5.3 {0.54} | ||
| 35 | 1 | 12 | 21 | 6.2 {0.63} | ||
| 40 | 1 | 12 | 24 | 7.1 {0.72} | ||
| 45 | 1 | 12 | 27 | 7.9 {0.81} | ||
| 50 | 1.1 | 19 | 30 | 8.8 {0.9} | ||
| 60 | 1.1 | 19 | 36 | 10.6 {1.08} | ||
| 70 | 1.2 | 26.4 | 42 | 12.4 {1.26} | ||
| 80 | 1.2 | 26.4 | 48 | 14.1 {1.44} | ||
| 20-20 | 1 | 6 | 12 | 5.9 {0.6} | 60 | |
| 25 | 1.1 | 7.7 | 15 | 7.4 {0.75} | ||
| 30 | 1.1 | 7.7 | 18 | 8.8 {0.9} | ||
| 35 | 1.2 | 10.8 | 21 | 10.3 {1.05} | ||
| 40 | 1.2 | 10.8 | 24 | 11.8 {1.2} | ||
| 45 | 1.3 | 14.3 | 27 | 13.2 {1.35} | ||
| 50 | 1.3 | 14.3 | 30 | 14.7 {1.5} | ||
| 60 | 1.4 | 19.6 | 36 | 17.7 {1.8} | ||
| 70 | 1.4 | 19.6 | 42 | 20.6 {2.1} | ||
| 80 | 1.5 | 27 | 48 | 23.5 {2.4} | ||
[!] Usage Count: 1 million times
■UF: Fmax. (allowable deflection) = L × 45%
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | |
| Type | D−L | ||||
| SL-UF SH-UF SHD-UF | 2-5* | 0.2 | 2.35 | 2.25 | 0.66 {0.068} |
| 10* | 0.2 | 2.35 | 4.5 | 1.3 {0.14} | |
| 15* | 0.26 | 7.8 | 6.7 | 2.0 {0.20} | |
| 20* | 0.26 | 7.8 | 9 | 2.7 {0.27} | |
| 25* | 0.29 | 13.6 | 11.2 | 3.3 {0.34} | |
| 30* | 0.29 | 13.6 | 13.5 | 4.0 {0.41} | |
| 3-5* | 0.26 | 1.8 | 2.25 | 1.1 {0.11} | |
| 10* | 0.32 | 4.5 | 4.5 | 2.2 {0.22} | |
| 15* | 0.32 | 4.5 | 6.7 | 3.2 {0.33} | |
| 20* | 0.35 | 6.3 | 9 | 4.4 {0.45} | |
| 25* | 0.35 | 6.3 | 11.2 | 5.5 {0.56} | |
| 30* | 0.4 | 12.4 | 13.5 | 6.6 {0.67} | |
| 35* | 0.4 | 12.4 | 15.7 | 7.6 {0.78} | |
| 40* | 0.4 | 12.4 | 18 | 8.8 {0.9} | |
| 4-5* | 0.32 | 2 | 2.25 | 1.1 {0.11} | |
| 10* | 0.35 | 3 | 4.5 | 2.2 {0.22} | |
| 15* | 0.4 | 5.2 | 6.7 | 3.2 {0.33} | |
| 20* | 0.4 | 5.2 | 9 | 4.4 {0.45} | |
| 25* | 0.45 | 9.5 | 11.2 | 5.5 {0.56} | |
| 30* | 0.45 | 9.5 | 13.5 | 6.6 {0.67} | |
| 35* | 0.5 | 15.5 | 15.7 | 7.6 {0.78} | |
| 40* | 0.5 | 15.5 | 18 | 8.8 {0.9} | |
| 45* | 0.5 | 15.5 | 20 | 9.8 {1} | |
| 50* | 0.5 | 15.5 | 22.5 | 10.8 {1.1} | |
| 60* | 0.55 | 22.6 | 27 | 12.7 {1.3} | |
| 5-5* | 0.35 | 2.01 | 2.25 | 1.1 {0.11} | |
| 10* | 0.4 | 3.2 | 4.5 | 2.2 {0.23} | |
| 15* | 0.4 | 3.2 | 6.75 | 3.3 {0.34} | |
| 20* | 0.45 | 4.95 | 9 | 4.4 {0.45} | |
| 25* | 0.45 | 4.95 | 11.25 | 5.5 {0.56} | |
| 30* | 0.5 | 7.75 | 13.5 | 6.7 {0.68} | |
| 35* | 0.5 | 7.75 | 15.75 | 7.7 {0.79} | |
| 40 | 0.6 | 19.5 | 18 | 8.8 {0.9} | |
| 45 | 0.6 | 19.5 | 20.25 | 10 {1.01} | |
| 50 | 0.6 | 19.5 | 22.5 | 11.2 {1.13} | |
| 60 | 0.65 | 27.95 | 27 | 13.4 {1.35} | |
| 6-5* | 0.4 | 2.2 | 2.25 | 1.1 {0.11} | |
| 10* | 0.5 | 5 | 4.5 | 2.2 {0.22} | |
| 15* | 0.55 | 7.7 | 6.7 | 3.2 {0.33} | |
| 20* | 0.55 | 7.7 | 9 | 4.4 {0.45} | |
| 25 | 0.6 | 10.8 | 11.2 | 5.5 {0.56} | |
| 30 | 0.65 | 15.6 | 13.5 | 6.6 {0.67} | |
| 35 | 0.65 | 15.6 | 15.7 | 7.6 {0.78} | |
| 40 | 0.65 | 15.6 | 18 | 8.8 {0.9} | |
| 45 | 0.65 | 15.6 | 20 | 9.8 {1} | |
| 50 | 0.7 | 23.1 | 22.5 | 10.8 {1.1} | |
| 60 | 0.7 | 23.1 | 27 | 12.7 {1.3} | |
| 70 | 0.75 | 30.8 | 31.5 | 14.7 {1.5} | |
| 8-10 | 0.6 | 5.4 | 4.5 | 2.2 {0.22} | |
| 15 | 0.65 | 7.2 | 6.7 | 3.2 {0.33} | |
| 20 | 0.7 | 10.5 | 9 | 4.4 {0.45} | |
| 25 | 0.7 | 10.5 | 11.2 | 5.5 {0.56} | |
| 30 | 0.75 | 13.5 | 13.5 | 6.6 {0.67} | |
| 35 | 0.75 | 13.5 | 15.7 | 7.6 {0.78} | |
| 40 | 0.8 | 18.4 | 18 | 8.8 {0.9} | |
| 45 | 0.8 | 18.4 | 20 | 9.8 {1} | |
| 50 | 0.8 | 18.4 | 22.5 | 10.8 {1.1} | |
| 60 | 0.85 | 26.4 | 27 | 12.7 {1.3} | |
| 70 | 0.85 | 26.4 | 31.5 | 14.7 {1.5} | |
| 80 | 0.85 | 26.4 | 36 | 17.7 {1.8} | |
| Part Number | d | Solid Length (Reference Value) | F max. | N{kgf} max. | |
| Type | D−L | ||||
| SL-UF SH-UF SHD-UF | 10-10 | 0.65 | 4.6 | 4.5 | 2.2 {0.22} |
| 15 | 0.65 | 4.6 | 6.7 | 3.2 {0.33} | |
| 20 | 0.8 | 9.6 | 9 | 4.4 {0.45} | |
| 25 | 0.8 | 9.6 | 11.2 | 5.5 {0.56} | |
| 30 | 0.85 | 12.8 | 13.5 | 6.6 {0.67} | |
| 35 | 0.85 | 12.8 | 15.7 | 7.6 {0.78} | |
| 40 | 0.9 | 17 | 18 | 8.8 {0.9} | |
| 45 | 0.9 | 17 | 20 | 9.8 {1} | |
| 50 | 0.9 | 17 | 22.5 | 10.8 {1.1} | |
| 60 | 1 | 28 | 27 | 12.7 {1.3} | |
| 70 | 1 | 28 | 31.5 | 14.7 {1.5} | |
| 80 | 1 | 28 | 36 | 17.7 {1.8} | |
| 12-15 | 0.8 | 6.8 | 6.7 | 3.2 {0.33} | |
| 20 | 0.8 | 6.8 | 9 | 4.4 {0.45} | |
| 25 | 0.8 | 6.8 | 11.2 | 5.5 {0.56} | |
| 30 | 0.9 | 10.8 | 13.5 | 6.6 {0.67} | |
| 35 | 1 | 17 | 15.7 | 7.6 {0.78} | |
| 40 | 1 | 17 | 18 | 8.8 {0.9} | |
| 45 | 1 | 17 | 20 | 9.8 {1} | |
| 50 | 1.1 | 26.4 | 22.5 | 10.8 {1.1} | |
| 60 | 1.1 | 26.4 | 27 | 12.7 {1.3} | |
| 70 | 1.1 | 26.4 | 31.5 | 14.7 {1.5} | |
| 80 | 1.2 | 39.6 | 36 | 17.7 {1.8} | |
| 13-15 | 0.8 | 5.6 | 6.7 | 3.2 {0.33} | |
| 20 | 0.8 | 5.6 | 9 | 4.4 {0.45} | |
| 25 | 0.85 | 7.2 | 11.2 | 5.5 {0.56} | |
| 30 | 1 | 14 | 13.5 | 6.6 {0.67} | |
| 35 | 1 | 14 | 15.7 | 7.6 {0.78} | |
| 40 | 1 | 14 | 18 | 8.8 {0.9} | |
| 45 | 1.1 | 21.5 | 20 | 9.8 {1} | |
| 50 | 1.1 | 21.5 | 22.5 | 10.8 {1.1} | |
| 60 | 1.1 | 21.5 | 27 | 12.7 {1.3} | |
| 70 | 1.2 | 30 | 31.5 | 14.7 {1.5} | |
| 80 | 1.2 | 30 | 36 | 17.7 {1.8} | |
| 16-15 | 0.9 | 5.6 | 6.7 | 3.2 {0.33} | |
| 20 | 1 | 7.7 | 9 | 4.4 {0.45} | |
| 25 | 1 | 7.7 | 11.2 | 5.5 {0.56} | |
| 30 | 1.1 | 12.1 | 13.5 | 6.6 {0.67} | |
| 35 | 1.1 | 12.1 | 15.7 | 7.6 {0.78} | |
| 40 | 1.2 | 18 | 18 | 8.8 {0.9} | |
| 45 | 1.2 | 18 | 20 | 9.8 {1} | |
| 50 | 1.2 | 18 | 22.5 | 10.8 {1.1} | |
| 60 | 1.3 | 26 | 27 | 12.7 {1.3} | |
| 70 | 1.3 | 26 | 31.5 | 14.7 {1.5} | |
| 80 | 1.4 | 35 | 36 | 17.7 {1.8} | |
| 20-20 | 1.2 | 7.2 | 9 | 8.8 {0.9} | |
| 25 | 1.3 | 9.1 | 11.3 | 11.1 {1.13} | |
| 30 | 1.4 | 11.9 | 13.5 | 13.2 {1.35} | |
| 35 | 1.4 | 11.9 | 15.8 | 15.5 {1.58} | |
| 40 | 1.5 | 15.8 | 18 | 17.7 {1.8} | |
| 45 | 1.5 | 15.8 | 20.3 | 19.9 {2.03} | |
| 50 | 1.6 | 20.8 | 22.5 | 22.1 {2.25} | |
| 60 | 1.6 | 20.8 | 27 | 26.5 {2.7} | |
| 70 | 1.7 | 26.4 | 31.5 | 30.9 {3.15} | |
| 80 | 1.7 | 26.4 | 36 | 35.3 {3.6} | |
[!] Usage Count: 1 million times
kgf (load) = N⋅mm (spring constant) × 0.101972 × F (Deflection)
[kgf]=N × 0.101972
● How to calculate the number of coils (reference value):
Total coils = solid length / wire diameter (d) - 1
Number of active coils = total coils - 2
* The values of the number of coils are for reference only. There may be some variations depending on the lot.
[!] The values of solid length are for reference only. There may be some variations depending on the lot.
Using it compressed to the solid length may cause deformation or break after a few uses.
Be sure to use the springs within the range of the allowable deflection F max.(mm).
■Spring Constant (N/mm) [kgf/mm]
[ ! ] D12 is applicable to UY, UR, and UF Types only.
[ ! ] D12 is applicable to UY, UR, and UF Types only.
| Type | SL-UV | SL-UY | SL-UR | SL-UF | SL-UM | SL-UH | |||||||||||||
| SH-UV | SH-UY | SH-UR | SH-UF | SH-UM | SH-UH | ||||||||||||||
| D | SHD-UV | SHD-UY | SHD-UR | SHD-UF | SHD-UM | SHD-UH | |||||||||||||
| 2 | 0.05 {0.005} | 0.2 {0.02} | 0.3 {0.03} | ||||||||||||||||
| 3 | 0.05 {0.005} | 0.098 {0.01} | 0.29 {0.03} | 0.49 {0.05} | |||||||||||||||
| 4 | 2 {0.2} | 2.9 {0.3} | |||||||||||||||||
| 5 | |||||||||||||||||||
| 6 | 2.9 {0.3} | 5.9 {0.6} | |||||||||||||||||
| 8 | |||||||||||||||||||
| 10 | 0.2 {0.02} | ||||||||||||||||||
| 12 | |||||||||||||||||||
| 13 | 9.8 {1.0} | ||||||||||||||||||
| 16 | |||||||||||||||||||
| 20 | 0.3 {0.03} | 0.5 {0.05} | 0.98 {0.1} | 4.9 {0.5} | 14.7 {1.5} | ||||||||||||||
| Fmax. | F = L × 70% | F = L × Fa% | F = L × Fa% | F = L × 45% | F = L × Fa% | F = L × Fa% | |||||||||||||
Cleaning Process· Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Alkaline warm pure water |  |  Ultrasonic pure water cleaning after cleaning with pure water *3 times | |  Dry | |  Anti-rust single packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for Use| Cleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Possible applications |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000*) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000*) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| SH-UR12-20 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Allowable Load (Configurable Range) (N) | Max. Load (N) | Free Length L (mm) | Outer Dia. D (or D1) (mm) | Spring Constant (N/mm) | Wire Dia. (mm) | Solid Length (mm) | Cleaning Method | Tolerance Change | Allowable Deflection (mm) | End Face Condition | Height At Maximum Load (free length - allowable deflection) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6.46 € | 1 | Available | 7 Days | 1.51 to 4.50 | 3.5 | 20 | 12 | 0.29 | 0.7 | 5.6 | Precision Cleaning | No grinding | 12 | No Grinding | 8 |
Loading...
Basic information
| Material | EN 1.4301 (WPB) Equiv. | Type | Round Wire | Properties / applications | Clean washing |
|---|---|---|---|---|---|
| Environmentally Friendly | RoHS compliant (10 substances) |
This page is [Cleaned & Packaged] Round Wire Coil Spring - O.D. Referenced, Stainless Steel, UY/UR/UF, part number SH-UR12-20.
You can find the detail information about specifications and dimensions on part number SH-UR12-20.
Configure
Basic Attributes
-
Type
- SH-UF
- SH-UR
- SH-UV
- SH-UY
- SHD-UF
- SHD-UR
- SHD-UV
- SHD-UY
- SL-UF
- SL-UR
- SL-UV
- SL-UY
-
Allowable Load (Configurable Range)(N)
- Up to 1.50
- 1.51 to 4.50
- 4.51 to 8.50
- 8.51 to 16.00
- 16.01 to 30.00
- 30.01 to 50.00
-
Max. Load(N)
- 0.15
- 0.18
- 0.29
- 0.34
- 0.35
- 0.37
- 0.44
- 0.49
- 0.525
- 0.53
- 0.59
- 0.66
- 0.7
- 0.74
- 0.875
- 0.88
- 0.9
- 0.98
- 1.05
- 1.1
- 1.18
- 1.225
- 1.23
- 1.3
- 1.4
- 1.47
- 1.5
- 1.575
- 1.58
- 1.75
- 1.77
- 1.8
- 1.84
- 2
- 2.06
- 2.2
- 2.206
- 2.21
- 2.26
- 2.5
- 2.55
- 2.6
- 2.7
- 2.9
- 2.94
- 2.942
- 3.2
- 3.3
- 3.33
- 3.43
- 3.5
- 3.53
- 3.68
- 4
- 4.4
- 4.41
- 5.1
- 5.15
- 5.3
- 5.49
- 5.5
- 5.88
- 5.9
- 6.2
- 6.3
- 6.6
- 6.62
- 6.7
- 7.1
- 7.35
- 7.4
- 7.6
- 7.65
- 7.7
- 7.8
- 7.9
- 8.8
- 8.83
- 8.9
- 9.8
- 9.9
- 10
- 10.3
- 10.6
- 10.8
- 11.03
- 11.1
- 11.2
- 11.6
- 11.77
- 11.8
- 12.4
- 12.7
- 13.2
- 13.24
- 13.4
- 14.1
- 14.7
- 15.45
- 15.5
- 17.65
- 17.7
- 19.9
- 20.6
- 22.1
- 23.5
- 26.5
- 30.9
- 35.3
-
Free Length L(mm)
-
Outer Dia. D (or D1)(mm)
-
Spring Constant(N/mm)
-
Wire Dia.(mm)
-
Solid Length(mm)
- 0.92
- 1.05
- 1.1
- 1.15
- 1.2
- 1.24
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.82
- 1.84
- 1.9
- 2
- 2.01
- 2.1
- 2.19
- 2.2
- 2.35
- 2.5
- 2.6
- 2.64
- 2.7
- 2.71
- 2.86
- 2.9
- 3
- 3.15
- 3.2
- 3.25
- 3.3
- 3.4
- 3.45
- 3.5
- 3.6
- 3.61
- 3.75
- 3.85
- 4.16
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.64
- 4.7
- 4.9
- 4.95
- 5
- 5.2
- 5.32
- 5.4
- 5.44
- 5.53
- 5.6
- 5.9
- 6
- 6.1
- 6.15
- 6.2
- 6.24
- 6.3
- 6.4
- 6.5
- 6.8
- 7
- 7.2
- 7.35
- 7.43
- 7.5
- 7.7
- 7.75
- 7.8
- 8
- 8.25
- 8.3
- 8.4
- 8.45
- 8.5
- 9.1
- 9.3
- 9.5
- 9.6
- 9.8
- 10.4
- 10.5
- 10.8
- 11
- 11.2
- 11.9
- 12
- 12.1
- 12.25
- 12.4
- 12.7
- 12.8
- 13.5
- 13.6
- 14
- 14.3
- 14.4
- 14.45
- 15.2
- 15.4
- 15.5
- 15.6
- 15.8
- 16.2
- 17
- 17.4
- 18
- 18.4
- 19
- 19.5
- 19.53
- 19.6
- 20.4
- 20.8
- 21
- 21.5
- 22.6
- 23
- 23.1
- 23.4
- 26
- 26.4
- 27
- 27.6
- 27.95
- 28
- 30
- 30.8
- 35
- 39.6
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
-
Tolerance Change
- No grinding
- With grinding
-
Allowable Deflection(mm)
-
End Face Condition
- No Grinding
- With Grinding
-
Height At Maximum Load (free length - allowable deflection)(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SH-UF10-25 |
| SH-UF10-30 |
| SH-UF10-35 |
| SH-UR12-25 |
| SH-UR12-30 |
| SH-UR12-35 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Allowable Load (Configurable Range) (N) | Max. Load (N) | Free Length L (mm) | Outer Dia. D (or D1) (mm) | Spring Constant (N/mm) | Wire Dia. (mm) | Solid Length (mm) | Cleaning Method | Tolerance Change | Allowable Deflection (mm) | End Face Condition | Height At Maximum Load (free length - allowable deflection) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5.80 € | 1 | Available | 7 Days | 4.51 to 8.50 | 5.5 | 25 | 10 | 0.49 | 0.8 | 9.6 | Precision Cleaning | With grinding | 11.2 | With Grinding | 13.8 | |
5.80 € | 1 | Available | 7 Days | 4.51 to 8.50 | 6.6 | 30 | 10 | 0.49 | 0.85 | 12.8 | Precision Cleaning | With grinding | 13.5 | With Grinding | 16.5 | |
5.80 € | 1 | Available | 7 Days | 4.51 to 8.50 | 7.6 | 35 | 10 | 0.49 | 0.85 | 12.8 | Precision Cleaning | With grinding | 15.7 | With Grinding | 19.3 | |
6.46 € | 1 | Available | 7 Days | 1.51 to 4.50 | 4.4 | 25 | 12 | 0.29 | 0.7 | 5.6 | Precision Cleaning | No grinding | 15 | No Grinding | 10 | |
6.46 € | 1 | Available | 7 Days | 4.51 to 8.50 | 5.3 | 30 | 12 | 0.29 | 0.8 | 9.6 | Precision Cleaning | No grinding | 18 | No Grinding | 12 | |
6.54 € | 1 | Available | 7 Days | 4.51 to 8.50 | 6.2 | 35 | 12 | 0.29 | 0.8 | 9.6 | Precision Cleaning | No grinding | 21 | No Grinding | 14 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.