Detachable Clean Hinges with Plastic Cap (Mounting Pitch Revised Type)
- Volume Discount
· Lightweight because it is made of aluminum.
·It is easy to maintain as it is detachable.
·You can choose between round holes and slotted holes.
·When installing the round hole type to the 8 series extrusion, the pitch is the same as the extrusion width, so it can be installed without any gaps.
·The Slotted Holes Type can be installed on either 6 Series or 8 Series.
·A plastic cap protects the hinge from light contact.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
| HHPNCCL (Round hole, for left-hand use) HHPNCCR (Round hole, for right-hand use) | HHPNCWL (Slotted hole, for left-hand use) HHPNCWR (Slotted hole, for right-hand use) |
L | L |
65 | 65 |
 (The drawing is for left-hand use) |  (The drawing is for left-hand use) |
Part Name | [M] Material | [S]Surface Treatment |
Main Body | EN AW-6005 T5 Equiv. | Clear Anodize |
Cap | Polyacetal | — |
Shaft | EN 1.4305 Equiv. | — |
Specification Table
Part Number |
HHPNCCL65 |
Part Number | * Allowable Load | Mass (g) | Applicable Extrusion | ||
Type | L | kg | N | ||
HHPNCCL (Round hole, for left-hand use) HHPNCCR (Round hole, for right-hand use) | 65 | 11 | 108 | 49 | 8 |
HHPNCWL (Slotted hole, for left-hand use) HHPNCWR (Slotted hole, for right-hand use) | 48 | 6·8 | |||
Alterations
Part Number | — | Alteration Part Number |
HHPNCWL65 HHPNCCR65 | — | SST1 SSU2 |
Alteration Part Number "SSP": Post-assembly insertion spring nut is used.
Alteration Part Number "SSU": Pre-assembly insertion spring nut is used
Alterations | Code | Spec. | Hinges | L | Applicable Extrusion | ||||||||||||||
Applicable Screw Nuts Set | SST1 |
| HHPNCWL HHPNCWR | 65 | 6 | ||||||||||||||
SSP1 | |||||||||||||||||||
SSU1 | |||||||||||||||||||
SST2 | HHPNCWL HHPNCWR HHPNCCL HHPNCCR | 8 | |||||||||||||||||
SSP2 | |||||||||||||||||||
SSU2 | |||||||||||||||||||
Either 6 or 8 Series can be selected for slotted-hole type.
The round hole type requires less clearance for extrusion mounting.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HHPNCWL65 |
| HHPNCWL65-SSP1 |
| HHPNCWL65-SSP2 |
| HHPNCWL65-SST1 |
| HHPNCWL65-SST2 |
| HHPNCWL65-SSU1 |
| HHPNCWL65-SSU2 |
| HHPNCWR65 |
| HHPNCWR65-SSP1 |
| HHPNCWR65-SSP2 |
| HHPNCWR65-SST1 |
| HHPNCWR65-SST2 |
| HHPNCWR65-SSU1 |
| HHPNCWR65-SSU2 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Left/Right Side | Mounting Screw Hole Type | Bolt · Nut Assembly | Applicable Extrusion | |
|---|---|---|---|---|---|---|---|---|
29.68 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | Single Unit (No Screw and Nut Set) | 6, 8 | |
33.62 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SSP (With Stainless Steel Screw and Post-Assembly Insertion Spring Nuts) | 6 | |
34.60 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SSP (With Stainless Steel Screw and Post-Assembly Insertion Spring Nuts) | 8 | |
32.47 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SST (With Stainless Steel Screw and Pre-Assembly Insertion Nut) | 6 | |
33.49 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SST (With Stainless Steel Screw and Pre-Assembly Insertion Nut) | 8 | |
34.43 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SSU (With Stainless Steel Screw and Pre-Assembly Insertion Spring Nuts) | 6 | |
34.97 € | 1 | Available | 5 Days | For Left-hand Use | Slotted Hole | SSU (With Stainless Steel Screw and Pre-Assembly Insertion Spring Nuts) | 8 | |
29.68 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | Single Unit (No Screw and Nut Set) | 6, 8 | |
33.62 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SSP (With Stainless Steel Screw and Post-Assembly Insertion Spring Nuts) | 6 | |
34.60 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SSP (With Stainless Steel Screw and Post-Assembly Insertion Spring Nuts) | 8 | |
32.47 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SST (With Stainless Steel Screw and Pre-Assembly Insertion Nut) | 6 | |
33.49 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SST (With Stainless Steel Screw and Pre-Assembly Insertion Nut) | 8 | |
34.43 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SSU (With Stainless Steel Screw and Pre-Assembly Insertion Spring Nuts) | 6 | |
34.97 € | 1 | Available | 5 Days | For Right-hand Use | Slotted Hole | SSU (With Stainless Steel Screw and Pre-Assembly Insertion Spring Nuts) | 8 |
Loading...
- The specification of the round hole type requires less clearance for extrusion mounting of 8 Series compared to conventional aluminum extrusion hinges, which prevents dust from entering.
- It is more effective if you seal the gap between the hinge mounting parts and the opposite side using a groove cover or sheet metal.
- The slotted-hole type can be adjusted either for 6 Series or 8 Series. Please consider the specifications when making your selection.
Basic information
| Type | Detachable Hinges | Length(mm) | 65 | Allowable Load(N) | 108 |
|---|---|---|---|---|---|
| Operating Environment | Standard / Cleanroom | Main Body Material | EN AW-6005 T5 Equiv. | Additional Function | Not Provided |
| Mounting Method | Screw Mounting | Properties / applications | Low Dust Generation / Non-Magnetic | Material Details | EN AW-6005 T5 Equiv. |
| Environmentally Friendly | RoHS compliant (10 substances) | Main Body Surface Treatment | Clear Anodize |
Configure
Basic Attributes
-
Left/Right Side
- For Right-hand Use
- For Left-hand Use
-
Bolt · Nut Assembly
- SSP (With Stainless Steel Screw and Post-Assembly Insertion Spring Nuts)
- SST (With Stainless Steel Screw and Pre-Assembly Insertion Nut)
- SSU (With Stainless Steel Screw and Pre-Assembly Insertion Spring Nuts)
- Single Unit (No Screw and Nut Set)
-
Applicable Extrusion
- 6
- 6, 8
- 8
-
Type
- HHPNCCL
- HHPNCCR
- HHPNCWL
- HHPNCWR
-
Mounting Screw Hole Type
- Round Hole
- Slotted Hole
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.