[Clean & Pack]Sprockets 40B (SHD-SSP40B23-S-14)
![[Clean & Pack]Sprockets 40B SHD-SSP40B23-S-14](http://uk.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310737819_001.jpg?$product_main$)
- Volume Discount
Product Details:
Manufacturer part number: SHD-SSP40B23-S-14
Brand: MISUMI
Price: 48.79 €
Delivery time: 7 Days
Technical Data:
Number of Teeth: 23 T
Shaft Bore Dia. D (or d): - mm
Type: Pilot Hole Type
Shaft Type: Standard Pilot Hole
Cleaning Method: Electrolytic polishing + precision cleaning
(i)Remark
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment. - Please check the content on our website as the PDF does not contain the most up-to-date information.
- From August 2023, the set screw size for shaft bore diameter (D): 10K will be changed from M5 to M4.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SHD-SSP40B23-S-14
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
| Shaft Bore Spec. S | Shaft Bore Spec. N | ||
| (Rough Machining) | (New JIS Key + Tap) | ||
 |  |  |
[ ! ] Offset between tooth tip and keyway is ±0.5 mm
| Type | [M] Material | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||
| SH-SSP40B | EN 1.4301 Equiv. | Precision cleaning | Class 1,000* | Degassing double packing | Class 10** |
| SHD-SSP40B | Electrolytic polishing + precision cleaning | ||||
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.[A]Accessories: Two set screws are included. (Only for shaft bore specification [N])
* The S-type shaft bore dia. values are for reference only and actual values may be smaller by 1 mm. (provided with a pilot hole)
* Machine key not included. Please purchase separately if necessary.
Specification Table
| Part Number | — | Shaft Bore Specs. | — | Shaft Bore Dia. |
| SH-SSP40B17 | — | N | — | 15 |
| SH-SSP40B20 | — | N | — | 18 |
| Part Number | Shaft Bore Specification | Shaft Bore Dia. (D) | Dp | Do | H | GD | L | ℓ | X | Z | Mass (g) | ||||||||||||||
| Type | Number of Teeth | S Specification | N Specification (H7) | ||||||||||||||||||||||
| Nominal | Hub Type | ||||||||||||||||||||||||
| SH-SSP SHD-SSP | 40 | B | 10 | S N | 9 | 12* | 15* | 16 | 41.1 | 46 | 32 | 27 | 22 | 5 | 7.2 | 5.2 | 140 | ||||||||
| 11 | 10 | 15 | 16 | 18 | 20* | 45.08 | 51 | 36 | 31 | 190 | |||||||||||||||
| 12 | 10 | 15* | 16* | 18 | 20* | 49.07 | 55 | 40 | 35 | 220 | |||||||||||||||
| 13 | 12 | 15* | 16 | 18 | 20* | 53.07 | 59 | 37 | — | 6 | — | 230 | |||||||||||||
| 14 | 12 | 15* | 16 | 18* | 19 | 20* | 22 | 24 | 25 | 57.07 | 63 | 42 | 280 | ||||||||||||
| 15 | 12 | 15* | 16 | 18 | 19 | 20* | 22 | 24 | 25* | 28 | 61.08 | 67 | 46 | 340 | |||||||||||
| 16 | 13 | 15* | 16 | 18 | 19 | 20* | 22 | 24 | 25* | 28 | 30 | 65.1 | 71 | 50 | 400 | ||||||||||
| 17 | 13 | 15 | 16 | 18 | 19 | 20* | 22 | 24 | 25 | 28 | 30 | 69.12 | 76 | 54 | 460 | ||||||||||
| 18 | 13 | 15 | 16 | 18 | 19 | 20 | 22 | 24 | 25 | 28 | 30 | 73.14 | 80 | 57 | 510 | ||||||||||
| 19 | 14 | 15* | 16 | 18 | 19 | 20 | 22 | 24 | 25* | 28 | 30 | 77.16 | 84 | 62 | 590 | ||||||||||
| 20 | 14 | 15 | 16 | 18 | 19 | 20* | 22 | 24 | 25 | 28 | 30 | 81.18 | 88 | 67 | 25 | 7 | 760 | ||||||||
| 21 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 85.21 | 92 | 71 | 850 | |||||||||||||
| 22 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 89.24 | 96 | 75 | 950 | |||||||||||||
| 23 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 93.27 | 100 | 77 | 1000 | |||||||||||||
| 24 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 97.3 | 104 | 63 | 840 | |||||||||||||
| 25 | 14 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 101.33 | 108 | 880 | ||||||||||||||
| 26 | 14 | 20 | 22 | 25 | 30 | 105.36 | 112 | 920 | |||||||||||||||||
| 28 | 14 | 20 | 22 | 25 | 30 | 113.43 | 120 | 1000 | |||||||||||||||||
| 30 | 14 | 20 | 22 | 25* | 30* | 121.5 | 128 | 1100 | |||||||||||||||||
| 32 | 14 | 20 | 22 | 25 | 30 | 129.57 | 137 | 68 | 28 | 10 | 1300 | ||||||||||||||
| 35 | 14 | 20 | 22 | 25 | 30 | 141.68 | 149 | 1400 | |||||||||||||||||
| 36 | 16 | 20 | 22 | 25 | 30 | 145.72 | 153 | 1500 | |||||||||||||||||
| 40 | 16 | 25* | 30* | 161.87 | 169 | 1700 | |||||||||||||||||||
| Shaft Bore Dia. D | Keyway b2 × t2 | Set screws | |
| M (Coarse) | Pitch | ||
| 10 | 3 × 1.4 | 4 | 0.7 |
| 10K / 12 | 4 × 1.8 | 5 | 0.8 |
| 14 to 17 | 5 × 2.3 | 6 | 1.0 |
| 18 to 22 | 6 × 2.8 | 6 | 1.0 |
| 24 to 30 | 8 × 3.3 | 8 | 1.25 |
| 32 to 38 | 10 × 3.3 | 8 | 1.25 |
| 40 / 42 | 12 × 3.3 | 8 | 1.25 |
| 45 / 50 | 14 × 3.8 | 10 | 1.5 |
| Applicable specifications | Set Screw | |
| M (Coarse) | Pitch | |
| Nominal: 35, Number of teeth: 17, Shaft diameter: 25 | 6 | 1.0 |
| Nominal: 40, Number of teeth: 14, Shaft diameter: 25 | 6 | 1.0 |
| Nominal: 40, Number of teeth: 15, Shaft diameter: 30 | 6 | 1.0 |
| Nominal: 50, Number of teeth: 11 to 13, Shaft diameter: 24 or more | 6 | 1.0 |
Cleaning Process· Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Alkaline warm pure water |  |  Ultrasonic pure water cleaning after cleaning with pure water *3 times | |  Dry | |  Anti-rust single packing |
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaningRo water cleaning | |  Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean benchin a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean benchin a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Packaging Example| For degreasing: (Part Number: SL-□□)  | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Possible applications |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000*) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000*) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| SHD-SSP40B23-S-14 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Cleaning Method | Hole Specifications | |
|---|---|---|---|---|---|---|---|---|---|---|
48.79 € | 1 | Available | 7 Days | 23 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) |
Loading...
Basic information
| Sprocket Shape | Shape B | Nominal | 40 | Number of Tracks | Single Row |
|---|---|---|---|---|---|
| Material | EN 1.4301 Equiv. | Chain Type | RS | Surface Treatment | Not Provided |
| Properties / applications | Clean washing | Environmentally Friendly | RoHS compliant (10 substances) |
This page is [Clean & Pack]Sprockets 40B, part number SHD-SSP40B23-S-14.
You can find the detail information about specifications and dimensions on part number SHD-SSP40B23-S-14.
Configure
Basic Attributes
-
Shaft Bore Dia. D (or d)(mm)
-
Type
- SH-SSP40B
- SHD-SSP40B
-
Number of Teeth(T)
-
Type
- Pilot Hole Type
- Shaft Bore Machined Type
-
Shaft Type
- Standard Pilot Hole
- Shaft Bore Machining Configurable
-
Cleaning Method
- Precision Cleaning
- Electrolytic polishing + precision cleaning
-
Hole Specifications
- N (New JIS Key + Tap)
- S (pilot bore)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SH-SSP40B13-S-12 |
| SH-SSP40B14-S-12 |
| SH-SSP40B15-S-12 |
| SHD-SSP40B24-S-14 |
| SHD-SSP40B25-S-14 |
| SHD-SSP40B26-S-14 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Cleaning Method | Hole Specifications |
|---|---|---|---|---|---|---|---|---|---|---|
25.67 € | 1 | Available | 7 Days | 13 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
25.75 € | 1 | Available | 7 Days | 14 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
25.91 € | 1 | Available | 7 Days | 15 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
47.36 € | 1 | Available | 7 Days | 24 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) | |
48.19 € | 1 | Available | 7 Days | 25 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) | |
49.26 € | 1 | Available | 7 Days | 26 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.