[Clean & Pack]Sprockets 11B (SHD-SSP11B20-S-8)
![[Clean & Pack]Sprockets 11B SHD-SSP11B20-S-8](http://uk.misumi-ec.com/linked/material/mech/MSM1/PHOTO/110310808649_001.jpg?$product_main$)
- Volume Discount
Product Details:
Manufacturer part number: SHD-SSP11B20-S-8
Brand: MISUMI
Price: 29.59 €
Delivery time: 7 Days
Technical Data:
Number of Teeth: 20 T
Shaft Bore Dia. D (or d): - mm
Type: Pilot Hole Type
Shaft Type: Standard Pilot Hole
Cleaning Method: Electrolytic polishing + precision cleaning
(i)Remark
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment. - Please check the content on our website as the PDF does not contain the most up-to-date information.
- Some part numbers may be delivered as a mix of products with a different appearance (with or without engraving), but this is not a problem with the specifications.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SHD-SSP11B20-S-8
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
|
| |||||||
| (Rough Machining) | (Straight Bore + Tap) | |||||||
 |  |  |
| Type | [M] Material | Cleaning Method | |||
| Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | ||
| SL-SSP11B | EN 1.4301 Equiv. | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSP11B | Precision cleaning | Class 1,000* | Degassing double packing | Class 10** | |
| SHD-SSP11B | Electrolytic Polishing + Precision Cleaning | ||||
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.[A]Accessories: One set screw is included. (Only for shaft bore specification [P])
[ ! ] Offset between tooth tip and keyway is ±0.5 mm.
* The S-type shaft bore dia. values are for reference only and actual values may be smaller by 1 mm. (provided with a pilot hole)
| Number of Teeth | Set Screw | |
| M (Coarse) | Pitch | |
| 12 to 18 | 3 | 0.5 |
| 20 to 48 | 4 | 0.7 |
Specification Table
| Part Number | — | Shaft Bore Specs. | — | Shaft Bore Dia. |
| SL-SSP11B15 | — | P | — | 6 |
| SH-SSP11B20 | — | S | — | 8 |
| SHD-SSP11B30 | — | P | — | 10 |
| Part Number | Shaft Bore Specs. | Shaft Bore Dia. D | Dp | Do | H | L | B | ℓ | Mass (g) | |||||||
| S Specification | P Specification (H7) | |||||||||||||||
| Type | Nominal | Hub Type | Number of Teeth | |||||||||||||
| SL-SSP SH-SSP SHD-SSP | 11 | B | 12 | S P | 5 | 5 | 14.48 | 16.2 | 9.4 | 10.5 | 1.6 | 4 | 6 | |||
| 15 | 5 | 5 | 6 | 18.02 | 19.9 | 13 | 10.5 | 1.6 | 4 | 12 | ||||||
| 16 | 5 | 5 | 6 | 8 | 19.2 | 21.1 | 14 | 10.5 | 1.6 | 4 | 14 | |||||
| 18 | 6 | 6 | 8 | 21.58 | 23.5 | 16 | 10.5 | 1.6 | 4 | 18 | ||||||
| 20 | 8 | 8 | 10 | 23.95 | 25.9 | 19 | 10.5 | 1.6 | 4 | 23 | ||||||
| 24 | 8 | 8 | 10 | 28.7 | 30.7 | 19 | 10.5 | 1.6 | 4 | 26 | ||||||
| 28 | 8 | 8 | 10 | 33.46 | 35.5 | 19 | 10.5 | 1.6 | 4 | 29 | ||||||
| 30 | 8 | 8 | 10 | 35.84 | 37.9 | 19 | 10.5 | 1.6 | 4 | 30 | ||||||
| 34 | 8 | 8 | 10 | 40.6 | 42.7 | 19 | 10.5 | 1.6 | 4 | 38 | ||||||
| 36 | 8 | 8 | 10 | 42.99 | 45.1 | 19 | 10.5 | 1.6 | 4 | 41 | ||||||
| 40 | 8 | 8 | 10 | 47.75 | 49.8 | 19 | 10.5 | 1.6 | 4 | 47 | ||||||
| 48 | 8 | 8 | 10 | 57.28 | 59.4 | 19 | 10.5 | 1.6 | 4 | 61 | ||||||
Cleaning Process· Degreasing (Part Number: SL-□□)
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaningRo water cleaning |  |  Wash with pure water after high-pressure water jet cleaning (Ro water) | |  Use Oil-free Compressor | |  Anti-rust single packing |
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaningRo water cleaning | | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Working Environment: Class 1,000* | Working Environment: Class 10** | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water) | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10** clean environment |
**US FED STD 209E, ISO 14644-1 ISO 4 Equiv.
Packaging Example| For degreasing: (Part Number: SL-□□)  Packaging type may vary depending on some products and sizes. | For precision cleaning or electrolytic polishing + precision cleaning: (Part Number: SH-□□/SHD-□□)  [ ! ] Both the first and second layer packaging are degassed. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Possible applications |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000*) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000*) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| SHD-SSP11B20-S-8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Cleaning Method | Hole Specifications | |
|---|---|---|---|---|---|---|---|---|---|---|
29.59 € | 1 | Available | 7 Days | 20 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) |
Loading...
Basic information
| Sprocket Shape | Shape B | Nominal | 11 | Number of Tracks | Single Row |
|---|---|---|---|---|---|
| Material | EN 1.4301 Equiv. | Chain Type | RS | Surface Treatment | Not Provided |
| Properties / applications | Clean washing | Environmentally Friendly | RoHS compliant (10 substances) |
This page is [Clean & Pack]Sprockets 11B, part number SHD-SSP11B20-S-8.
You can find the detail information about specifications and dimensions on part number SHD-SSP11B20-S-8.
Configure
Basic Attributes
-
Shaft Bore Dia. D (or d)(mm)
-
Type
- SH-SSP11B
- SHD-SSP11B
- SL-SSP11B
-
Number of Teeth(T)
-
Type
- Pilot Hole Type
- Shaft Bore Machined Type
-
Shaft Type
- Standard Pilot Hole
- Shaft Bore Machining Configurable
-
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic polishing + precision cleaning
-
Hole Specifications
- P (Round hole + Tap)
- S (pilot bore)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SH-SSP11B18-S-6 |
| SH-SSP11B20-S-8 |
| SH-SSP11B24-S-8 |
| SHD-SSP11B24-S-8 |
| SHD-SSP11B28-S-8 |
| SHD-SSP11B30-S-8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Number of Teeth (T) | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Cleaning Method | Hole Specifications |
|---|---|---|---|---|---|---|---|---|---|---|
26.65 € | 1 | Available | 7 Days | 18 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
26.89 € | 1 | Available | 7 Days | 20 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
29.02 € | 1 | Available | 7 Days | 24 | - | Pilot Hole Type | Standard Pilot Hole | Precision Cleaning | S (pilot bore) | |
31.71 € | 1 | Available | 7 Days | 24 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) | |
32.21 € | 1 | Available | 7 Days | 28 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) | |
32.54 € | 1 | Available | 7 Days | 30 | - | Pilot Hole Type | Standard Pilot Hole | Electrolytic polishing + precision cleaning | S (pilot bore) |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.