Welding Wire For Stainless Steel, WEL FCW 316LT (Part Numbers)
WEL FCW 316LT is a wire containing flux for austenitic stainless steel that includes low carbon and Mo contents. As the carbon contained amount is low, the deposited metal does not cause intergranular corrosion when used as welded.
Therefore, it is suitable for places where severe corrosion resistance is required such as chemical corrosion environments including flue gas desulfurization equipment, fertilizer plants, food chemical equipment as well as marine atmosphere.
Therefore, it is suitable for places where severe corrosion resistance is required such as chemical corrosion environments including flue gas desulfurization equipment, fertilizer plants, food chemical equipment as well as marine atmosphere.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Basic information
| Product Type | Welding wire | Wire Diameter(mm) | 0.9 | Current range, lower(A) | 120～130 |
|---|---|---|---|---|---|
| Current range, vertical position, elevating, upper | 60~80 | Arc Voltage Down Facing(V) | 26～29/24～27 | Arc Voltage Vertical Up Facing(V) | 21～24/20～23 |
| Amount Of Content | 1 Box (12.5 kg) | Features | WEL FCW 316LT is a flux-including wire for austenite stainless steel possessing low-carbon Mo, and as the quantity of carbon is low, the welding metal can be used as is, already welded, without grain boundary corrosion occurring. Therefore, it is appropriate for chemically corrosive environments such as with smoke desulfurization equipment, fertilizer plants, or food chemistry equipment, or in locations that require an high degree of corrosion-resistance, such as ocean environments. | Application | SUS 316、SUS 316L |
| Shield Gas Flow Rate(l/min) | 20 | Extension(mm) | 15~25 | (JIS) Equivalent standard | TS316L-FB0 |
| (AWS) Equivalent standard | E316LT0-1/4 | Chemical components C(%) | 0.023 | Chemical components Si(%) | 0.68 |
| Chemical components Cu(%) | 0.03 | Chemical components Mn(%) | 1.04 | Chemical components P(%) | 0.019 |
| Chemical components S(%) | 0.008 | Chemical components Ni(%) | 12.02 | Chemical components Cr(%) | 18.60 |
| Chemical components Mo(%) | 2.61 | Mechanical property (tensile strength)(Mpa) | 538 | Mechanical property (elongation)(%) | 40.2 |
| Mechanical property (0.2% yield stress)(Mpa) | 420 | Shield Gas | 100%CO2/80%Ar+20%CO2 | Mass(g) | 12500 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.