Spiral Tap For High Carbon Steel HC+SP / HC-SP
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SCPP3.0G
Part Number
|
|---|
| SCPP3.0G |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | Class | Thread Length (mm) | Length under neck (mm) | Shank diameter (Ds) (mm) | Shank square width (K) (mm) | Shank square part length (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
12.06 € | 1 | 6 Days | M3 | 0.5 | 46 | P1 | 9 | 14 | 4 | 3.2 | 6 |
Loading...
Basic information
| Screw Types | Meter | Chamfer threads | 2.5P | Tool Material Type | High-speed steel |
|---|---|---|---|---|---|
| work material | Low-Carbon Steel (carbon alloy less than 0.25%) / Medium carbon steel (carbon content 0.25 to 0.45%) / High Carbon Steel (C with a content over 0.45%) / Quenched and tempered steel (25 to 35 HRC) / Steel casting (SC) / Copper (Cu) / Brass (Bs) / Brass cast iron (BsC) / Bronze (Pb) / Aluminum Rolled Material (AL) / Aluminum Alloy Casting (AC, ADC) / Magnesium Alloy (MC) / Zinc Alloy Casting (ZDC) | Tap Type | Spiral Tap | Hole type | For blind hole |
| Coating Y/N | N/A | Number of Grooves | 3 | Shape | c |
| Torsional Angle | 35° |
This page is Spiral Tap For High Carbon Steel HC+SP / HC-SP, part number SCPP3.0G.
You can find the detail information about specifications and dimensions on part number SCPP3.0G.
Configure
Basic Attributes
-
Pitch, Number of Threading(mm)
-
Overall Length (L)(mm)
-
Class
- P1
- P2
-
Thread Length(mm)
-
Length under neck(mm)
-
Shank diameter (Ds)(mm)
-
Shank square width (K)(mm)
-
Shank square part length(mm)
-
Type
- HC+SP/HC-SP
-
Nominal
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| SCPQ4.0I |
| SCPQ5.0K |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Nominal | Pitch, Number of Threading (mm) | Overall Length (L) (mm) | Class | Thread Length (mm) | Length under neck (mm) | Shank diameter (Ds) (mm) | Shank square width (K) (mm) | Shank square part length (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
12.06 € | 1 | 6 Days | M4 | 0.7 | 52 | P2 | 11 | 17 | 5 | 4 | 7 | ||
12.14 € | 1 | 6 Days | M5 | 0.8 | 60 | P2 | 13 | 22 | 5.5 | 4.5 | 7 |
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.