Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Square End Mills (HSS)（Tool Material Type：Cobalt HSS）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less

?* Information on days to ship and prices

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and short cutting edge length, where the cutting edge diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

2-Flute Extra Long EXDL

OSG

2-flute milling cutter for general purposes in super-long design with cobalt high-speed steel as basic material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Medium LS-EDN

OSG

Long shank, medium diameter, 2 flute cutter made of cobalt high speed steel as the base material. It can be used for machining long projections.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute General Use, Long

OSG

Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.22 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

End Mill (3-Flute General-Purpose Short Type), ETS

OSG

Short 3 flute cutter for general purpose using cobalt high speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.62 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

End Mill (2 Flutes, for Stainless Steel), SUS-EDS

OSG

2-flute end mills short for stainless steel with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.42 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Multi-Flute Extra Long EXML

OSG

30°- 45° helix angle, cobalt high-speed steel, extra long type end mill.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute, Short

MISUMI

[Features]
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	19.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular

MISUMI

Volume Discount

AS
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	19.84 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 2-Flute / Long

MISUMI

[Features]
-Suitable for milling deep cavities
-It has a coating with high oxidation resistance and high hardness, and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

AS
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	22.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Short

MISUMI

Volume Discount

AS
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	21.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular

MISUMI

[Features]
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

AS
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	22.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

AS Coated High-Speed Steel Square End Mill, 4-Flute / Long

MISUMI

[Features]
-Suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

AS
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	25.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

MISUMI

[Features]
-Quick-action steel uncoated, square, short, 2-bladed with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	10.16 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

MISUMI

[Features]
-High-speed steel uncoated, square, normal blade length, 2-groove type with up to ø50
-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices etc.

Volume Discount

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	10.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

MISUMI

[Features]
-High speed steel uncoated, square, long flutes, 2 flute type with up to ø50
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
2 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	12.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute short cutting edge
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	11.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

MISUMI

[Features]
-Uncoated 4-slot blade with normal length
-Effective for side milling with 40° helix angle, which is stronger than the standard helix angle
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Starting from^∗ ：	13.99 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

MISUMI

[Features]
-Uncoated 4 flute design with long flute
-Effective for side milling with 40° helix angle stronger than standard helix angle
-Suitable for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
4 Flutes
L (Long)

Select to compare

Configure now
Starting from^∗ ：	16.08 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

High-Speed Steel Corner C End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High-speed steel 2-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel 4-flute corner chamfer cutter with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Corner C End Mill, 4-Flute / Regular Model

MISUMI

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model

MISUMI

[Features]
-High speed steel cutter with 2 flanks, which can be sized to customer requirements to avoid unwanted tool overlap.

Non-Coated
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model

MISUMI

[Features]
-High speed steel reamer with 2 flats that can be made to measure to avoid unwanted tool interference

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model

MISUMI

[Features]
-High-speed steel end mill with 4 flanks that can be sized to customer specifications to avoid unwanted tooling interference

Non-Coated
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model

MISUMI

[Features]
-High speed steel cutter with 4 flanks that can be sized to customer requirements to avoid unwanted tooling interference.

Non-Coated
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

MISUMI

[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.

Non-Coated
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	7 Days

AG Mill, 2-Flute 2AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	48.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 4-Flute 4GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	44.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 2-Flute SL2GE

NACHI(FUJIKOSHI)

Performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for deep grooving and grooving at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.38 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 2-Flute 2SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Super Hard, 4-Flute 4SE

NACHI(FUJIKOSHI)

General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	34.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 4-Flute 4AGE

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.

Select to compare

Configure now
Starting from^∗ ：	44.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

NATAC, 2-Flute 2NAC

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	40.85 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 2-Flute Mill, Medium 2AGEM

NACHI(FUJIKOSHI)

Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.

Select to compare

Configure now
Starting from^∗ ：	51.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

AG Mill, 4-Flute, Long 4AGEL

NACHI(FUJIKOSHI)

Suitable for wide side surfaces and side milling at depth.

Select to compare

Configure now
Starting from^∗ ：	111.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 2-Flute 2GE

NACHI(FUJIKOSHI)

General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Standard End Mill, 3-Flute 3GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill.

Select to compare

Configure now
Starting from^∗ ：	44.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Long End Mill, 4-Flute SL4GE

NACHI(FUJIKOSHI)

General-purpose coating end-mill. Suitable for wide side surfaces and side milling at depth.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	69.45 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

For 2-Flute Key Groove EKD (OH1)

OSG

2 flute general purpose cutters with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.96 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For 2-Flute Key Groove EX-TIN-EKD (OH1)

OSG

TiN coated 2 flute cutter with a cutting edge diameter tolerance of 0 to +0.02.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

2-Flute General Use, Short EDS

OSG

High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.46 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Short EX-TIN-EDS

OSG

TiN coated 2 flute general purpose cutter in short design.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute General Use, Medium

OSG

Universal 2-flute cutter in medium design with cobalt high-speed steel as base material.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
work material
Blade shape type
Number of flutes(sheet)
Tool Material Type
Machining Application
Shank diameter (d)(mm)
Coating
Overall Length (L)(mm)
Torsion Angle (θ)
Base Blade Y/N
Underneck length (ℓ1)(mm)
shank

	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product Series	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Short	2-Flute Extra Long EXDL	2-Flute Long Shank Medium LS-EDN	2-Flute General Use, Long	End Mill (3-Flute General-Purpose Short Type), ETS	End Mill (2 Flutes, for Stainless Steel), SUS-EDS	Multi-Flute Extra Long EXML	AS Coated High-Speed Steel Square End Mill, 2-Flute, Short	AS Coated High-Speed Steel Square End Mill, 2-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 2-Flute / Long	AS Coated High-Speed Steel Square End Mill, 4-Flute / Short	AS Coated High-Speed Steel Square End Mill, 4-Flute / Regular	AS Coated High-Speed Steel Square End Mill, 4-Flute / Long	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	High-Speed Steel Corner C End Mill, 2-Flute / Short Model	High-Speed Steel Corner C End Mill, 2-Flute / Regular Model	High-Speed Steel Corner C End Mill, 4-Flute / Short Model	High-Speed Steel Corner C End Mill, 4-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 2-Flute / Regular Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Short Model	High-Speed Steel Blade Relief End Mill, 4-Flute / Regular Model	High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular	AG Mill, 2-Flute 2AGE	G Standard End Mill, 4-Flute 4GE	G Long End Mill, 2-Flute SL2GE	Super Hard, 2-Flute 2SE	Super Hard, 4-Flute 4SE	AG Mill, 4-Flute 4AGE	NATAC, 2-Flute 2NAC	AG Mill, 2-Flute Mill, Medium 2AGEM	AG Mill, 4-Flute, Long 4AGEL	G Standard End Mill, 2-Flute 2GE	G Standard End Mill, 3-Flute 3GE	G Long End Mill, 4-Flute SL4GE	For 2-Flute Key Groove EKD (OH1)	For 2-Flute Key Groove EX-TIN-EKD (OH1)	2-Flute General Use, Short EDS	2-Flute Short EX-TIN-EDS	2-Flute General Use, Medium
Starting from^∗	-	26.33 € *Unit price with basic configuration Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	18.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.62 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	18.42 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	19.26 € *Unit price with basic configuration Volume Discount	19.84 € *Unit price with basic configuration Volume Discount	22.54 € *Unit price with basic configuration Volume Discount	21.31 € *Unit price with basic configuration Volume Discount	22.66 € *Unit price with basic configuration Volume Discount	25.73 € *Unit price with basic configuration Volume Discount	10.16 € *Unit price with basic configuration Volume Discount	10.86 € *Unit price with basic configuration Volume Discount	12.79 € *Unit price with basic configuration Volume Discount	11.59 € *Unit price with basic configuration Volume Discount	13.99 € *Unit price with basic configuration Volume Discount	16.08 € *Unit price with basic configuration Volume Discount	-	-	-	-	-	-	-	-	-	48.85 € *Unit price with basic configuration	44.13 € *Unit price with basic configuration	48.38 € *Unit price with basic configuration	30.16 € *Unit price with basic configuration	34.48 € *Unit price with basic configuration	44.74 € *Unit price with basic configuration	40.85 € *Unit price with basic configuration	51.84 € *Unit price with basic configuration	111.61 € *Unit price with basic configuration	39.04 € *Unit price with basic configuration	44.69 € *Unit price with basic configuration	69.45 € *Unit price with basic configuration	16.96 € *Unit price with basic configuration Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	15.46 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.13 € *Unit price with basic configuration Volume Discount	16.24 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	7 Days	6 Days	6 Days	Same day	Same day	Same day	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	10 Days	6 Days	6 Days	Same day	6 Days	6 Days
Specifications	Non-Coated 2 Flutes S (Short)							AS 2 Flutes S (Short)	AS 2 Flutes R (Regular)	AS 2 Flutes L (Long)	AS 4 Flutes S (Short)	AS 4 Flutes R (Regular)	AS 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes R (Regular)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 2 Flutes R (Regular)
Blade diameter (D)(φ)	2.7 ～ 25	3 ～ 40	10 ～ 40	0.8 ～ 40	1 ～ 30	1.5 ～ 30	3 ～ 40	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 40	3 ～ 30	3 ～ 40	1 ～ 50	1 ～ 25	3 ～ 40	3 ～ 40	3 ～ 30	3 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	8 ～ 25	2.7 ～ 24.99	3.5 ～ 50	4 ～ 50	4 ～ 25	2.5 ～ 50	4.5 ～ 50	4.5 ～ 50	3.3 ～ 11.3	8.5 ～ 10	14 ～ 20	1.3 ～ 50	3 ～ 40	7	3 ～ 25	3 ～ 25	0.45 ～ 60	0.8 ～ 50	1 ～ 20
Blade length (ℓ)(mm)	8 ～ 50	30 ～ 150	25 ～ 65	6 ～ 110	2.5 ～ 55	4 ～ 55	30 ～ 150	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	2.5 ～ 75	3.5 ～ 60	15 ～ 110	8 ～ 65	12 ～ 68	15 ～ 110	8 ～ 50	10 ～ 60	8 ～ 45	12 ～ 68	-	-	-	-	10 ～ 60	8 ～ 70	12 ～ 70	20 ～ 90	7 ～ 70	15 ～ 70	15 ～ 70	7 ～ 22	25	55 ～ 75	3 ～ 70	6 ～ 65	35	5 ～ 25	5 ～ 25	1.1 ～ 80	1.6 ～ 75	3.5 ～ 45
work material	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[◎]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of flutes(sheet)	2	2	2	2	3	2	4	2	2	2	4	4	4	2	2	2	4	4	4	2	2	4	4	2	2	4	4	2	2	4	2	2	4	4	2	2	4	2	3	4	2	2	2	2	2
Tool Material Type	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Machining Application	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Shank diameter (d)(mm)	6 ～ 25	6 ～ 32	10 ～ 32	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	10 ～ 25	6 ～ 25	8 ～ 32	8 ～ 42	8 ～ 25	6 ～ 42	8 ～ 42	8 ～ 32	6 ～ 12	10	16 ～ 20	6 ～ 42	6 ～ 32	10	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 42	6 ～ 20
Coating	TiCN / Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	TiCN / Non-Coated	AG	TiN	TiN	Non-Coated	Non-Coated	AG	Non-Coated	TiAlN	AG	TiN	TiN	TiN	Non-Coated	TiN	Non-Coated	TiN	Non-Coated
Overall Length (L)(mm)	50 ～ 120	70 ～ 235	125 ～ 235	50 ～ 195	45 ～ 125	45 ～ 125	70 ～ 235	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	45 ～ 165	45 ～ 130	60 ～ 195	52 ～ 150	55 ～ 144	60 ～ 195	50 ～ 120	50 ～ 130	52 ～ 121	55 ～ 144	60 ～ 120	60 ～ 130	69 ～ 121	78 ～ 144	50 ～ 130	60 ～ 155	60 ～ 160	60 ～ 160	50 ～ 160	60 ～ 160	60 ～ 155	50 ～ 80	75	110 ～ 140	50 ～ 160	50 ～ 150	80	50 ～ 95	50 ～ 95	45 ～ 170	45 ～ 165	45 ～ 110
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Weak torsion (15˚ to 25˚)	Weak torsion (15˚ to 25˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)
Base Blade Y/N	Available	-	-	-	-	-	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	Straight	Straight	Straight	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.45～0.95
  - 0.45
  - 0.8
  - 0.9
  - 0.95
- 1～1.9
  - 1
  - 1/2
  - 1.05
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]

Drawing

Clear

Blade length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

27

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

150

160

180

200

250

300
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
Details

Clear

Blade shape type
- Square
- For Keyway
Clear

Number of flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
Details

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
- Other
Images

Clear

Shank diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 27
- 31～38
  - 31
  - 35
  - 38
- 40～48
  - 40
  - 42
  - 45
  - 46
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 82
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340
- 350
- 400
Drawing

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Other
Clear

Base Blade Y/N
- Available
Clear

Underneck length (ℓ1)(mm)
21

44
Drawing

Clear

shank
- Straight
Clear

Brand

- MISUMI (22)
- Cost Efficient Products ()
- OSG (27)
- NACHI(FUJIKOSHI) (12)
- SANKO MFG (12)
- EIKOSHA (2)
- FUKUDA (0)
- DAIICHITOOL (0)
- TAIYO-TOOL (0)
- ASAHI TOOLS (0)
- ESCO (0)
Clear