EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Screw-Hole-Related Tools（Coating Y/N：Available Page 2）

Search by sub-category

138

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Spiral Tap Series, for Copper, CU-SFT

OSG

Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series MC-Planet Cutters PNGT

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Select to compare

Configure now
Starting from^∗ ：	205.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

OSG

By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

Select to compare

Configure now
Starting from^∗ ：	165.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	15.45 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coated, V-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coating, Long Shank, V-LT-POT

OSG

Select to compare

Configure now
Starting from^∗ ：	23.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coated TIN-TPT

OSG

TIN coating with excellent solvent resistance, abrasion resistance has been applied.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT

OSG

TIN coating with excellent solvent resistance, abrasion resistance has been applied.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	39.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT

OSG

TIN coating with excellent solvent resistance, abrasion resistance has been applied.

Select to compare

Configure now
Starting from^∗ ：	41.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT

OSG

TIN coating with excellent solvent resistance, abrasion resistance has been applied.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT

OSG

Exhibits Exceptional Power Toward 50-60 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, etc.)

Select to compare

Configure now
Starting from^∗ ：	168.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes For Aluminum V-AL-TPT

OSG

Ideal for taper female screw machining for aluminum alloy tube, as gouging of female screw occurs easily

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Promotional pricing

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT

OSG

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Reduces burrs, whiskers, and tears.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT

OSG

Through the use of plastic deformation, high speed, high precision female screw processing is done on aluminum and aluminum alloys without producing any chips

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series For Copper CU-NRT

OSG

Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	18.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series For Non-Ferrous Alloy B-NRT

OSG

Suitable for nonferrous alloys such as aluminum, magnesium, zinc, copper and it's alloys.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MMTS Micro Threading Tool

NS TOOL

Helical threaded with a smaller tool diameter than that of pilot holes, so removal and re-processing is possible when broken

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	96.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (regular size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	95.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap remover Plus (long size)

EIKOSHA

Dedicated drill for removing broken high speed steel taps

Select to compare

Configure now
Starting from^∗ ：	100.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

IT-Toughlet C Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

IT-Toughlet TiCN Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Select to compare

Configure now
Starting from^∗ ：	36.80 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Seamless TAFLET

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long Seamless TAFLET

TANOI MFG

Cold forming tap with correct chamfer without pitch and angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	73.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Select to compare

Configure now
Starting from^∗ ：	244.94 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

GUHRING

Select to compare

Configure now
Starting from^∗ ：	189.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Rolling Tap 1017

GUHRING

[Features]
· Rolling tap suitable for steel with ductility or non-ferrous metal such as aluminum or copper.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.25 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	66.42 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the horizontal direction processing.

Select to compare

Configure now
Starting from^∗ ：	101.09 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Select to compare

Configure now
Starting from^∗ ：	38.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Titanium Coated Through Hole Spiral Tap AU+SL

YAMAWA MFG

Coated Spiral Tap For Through Hole Drilling Suited For Stable Mid-Speed (10 to 25m/minute) Threading in Both Synchronous and Asynchronous Machining

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	21.97 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.68 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Coating Spiral Tap AU+ SP

YAMAWA MFG

Coating spiral tap with blind holes has a screw part that leaves behind complete threads and its special form sweeps away half of the screw threads afterwards + unique groove form helps maintain the discharge of scraps and has achieved in reducing friction.

Select to compare

Configure now
Starting from^∗ ：	21.93 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Tap for High Hardness Steel EH-CT

YAMAWA MFG

Ideal for tapping of high hardness steels 45 to 55 HRC, and hot die steels (SKS3, such as SKD11) Female screws with a maximum internal diameter of 6H are recommended for pilot holes.

Select to compare

Configure now
Starting from^∗ ：	100.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Through Holes for High Speed F-SL

YAMAWA MFG

Capable of 20/MIN ~ 30/MIN high-speed processing. Use of Medium or Low Speeds at 15M/MIN or Less Will Cause a Poor Shape and Poor Emission of Chips, Causing Trouble to Occur

Select to compare

Configure now
Starting from^∗ ：	51.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Metric Screw (ISO)

CARMEX

Enables internal threading to be performed in a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread G (55°)

CARMEX

Threading can be performed for both internal and external threads with a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread BSPT

CARMEX

For both internal and external threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	EIKOSHA	EIKOSHA	TANOI MFG	TANOI MFG	TANOI MFG	TANOI MFG	GUHRING	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	CARMEX	CARMEX	CARMEX	CARMEX
Product Series	Spiral Tap Series, for Copper, CU-SFT	Planet Cutter Series MC-Planet Cutters PNGT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series, V Coated, V-POT	Point Tap Series, V Coating, Long Shank, V-LT-POT	Point Tap Series, Ultra Synchronizing Taps, HS-RFT	Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT	Taper Tap Series for Pipes TIN Coated TIN-TPT	Taper Tap Series for Pipes TIN Coating Interrupted Thread TIN-IRT	Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws TIN-S-IRT	Taper Tap Series for Pipes TIN Coated Short Screws TIN-S-TPT	Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT	Taper Tap Series for Pipes For Aluminum V-AL-TPT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT	Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT	Groove-Free Tap Series For Copper CU-NRT	Groove-Free Tap Series For Non-Ferrous Alloy B-NRT	MMTS Micro Threading Tool	Tap remover Plus (regular size)	Tap remover Plus (long size)	IT-Toughlet C Coated	IT-Toughlet TiCN Coated	Seamless TAFLET	Long Seamless TAFLET	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133	Rolling Tap 1017	HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Titanium Coated Through Hole Spiral Tap AU+SL	Dry Processing Roll Tap OL+RZ / OL-RZ	Coating Spiral Tap AU+ SP	Carbide Tap for High Hardness Steel EH-CT	Spiral Tap for Through Holes for High Speed F-SL	Carbide Solid Mill Thread Metric Screw (ISO)	Carbide Solid Mill Thread G (55°)	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread BSPT
Starting from^∗	26.27 € *Unit price with basic configuration	205.83 € *Unit price with basic configuration	295.75 € *Unit price with basic configuration	165.90 € *Unit price with basic configuration	15.45 € *Unit price with basic configuration Volume Discount	22.83 € *Unit price with basic configuration Volume Discount	24.73 € *Unit price with basic configuration Volume Discount	23.17 € *Unit price with basic configuration	30.20 € *Unit price with basic configuration Volume Discount	21.73 € *Unit price with basic configuration Volume Discount	30.48 € *Unit price with basic configuration Volume Discount	39.15 € *Unit price with basic configuration Volume Discount	41.25 € *Unit price with basic configuration	31.88 € *Unit price with basic configuration Volume Discount	168.46 € *Unit price with basic configuration	27.23 € *Unit price with basic configuration Volume Discount	19.82 € *Unit price with basic configuration Volume Discount	- Volume Discount	19.89 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	22.33 € *Unit price with basic configuration Volume Discount	19.52 € *Unit price with basic configuration Volume Discount	18.92 € *Unit price with basic configuration Volume Discount	16.42 € *Unit price with basic configuration Volume Discount	96.41 € *Unit price with basic configuration Volume Discount	95.33 € *Unit price with basic configuration	100.70 € *Unit price with basic configuration	36.80 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	36.80 € Special price *Unit price with basic configuration Promotional pricing	55.77 € *Unit price with basic configuration	73.26 € *Unit price with basic configuration	244.94 € *Unit price with basic configuration	189.20 € *Unit price with basic configuration	31.25 € *Unit price with basic configuration Volume Discount	66.42 € *Unit price with basic configuration Volume Discount	101.09 € *Unit price with basic configuration	38.20 € *Unit price with basic configuration	21.97 € *Unit price with basic configuration	29.68 € *Unit price with basic configuration Volume Discount	21.93 € *Unit price with basic configuration	100.50 € *Unit price with basic configuration	51.40 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration
Min. Shipping Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	Same day	6 Days	6 Days	8 Days	8 Days	8 Days	8 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Screw Types	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Taper for Pipe	Meter / Unified	Meter / Unified	Meter / Unified	Meter	Meter	Meter	Meter	Other	-	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Parallel for Pipes	Unified	Parallel for Pipes
Screw size (Nominal)	M10	-	M6 ～ M12	-	M1.4 ～ M42	M3 ～ M24	M8 ～ M10	M4 ～ M6	M3 ～ M14	M3 ～ M14	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1 ～ R3/8	R1/2 ～ R3/8	R1 ～ R3/8	M1 ～ No4UN	M1 ～ M12	M1 ～ No6UN	M6	M3	M4	M8 ～ M20	S0.1 ～ S1.4	M3 ～ M24	M3 ～ M12	M1 ～ M10	M1 ～ M10	M2 ～ M20	M4 ～ M6	M6 ～ M20	M6 ～ M20	M3 ～ M6	M10 ～ M14	M14	M6	M3	M1.6 ～ M6	M2 ～ M12	M5	M8 ～ M10	M3 ～ M27	-	-	-
Pitch (P), Number of Threading(mm)	1.5	1 ～ 19	1 ～ 1.75	0.5 ～ 3	0.3 ～ 4.5	0.5 ～ 3	1 ～ 1.25	0.7 ～ 1	0.5 ～ 2	0.5 ～ 2	11 ～ 28	11 ～ 28	11 ～ 28	11 ～ 28	14 ～ 28	11 ～ 28	0.25 ～ 56	0.25 ～ 56	0.25 ～ 56	1	0.5	0.7	1.25 ～ 1.5	0.025 ～ 0.3	-	-	0.2 ～ 1.5	0.2 ～ 1.5	0.4 ～ 2.5	0.7 ～ 1	1 ～ 2.5	1 ～ 2.5	0.5 ～ 1	1.25 ～ 1.5	1.5	1	0.5	0.35 ～ 1	0.4 ～ 1.75	0.8	1.25 ～ 1.5	0.5 ～ 3	11 ～ 28	-	-
Chamfer threads (Lcf)	2.5P	-	-	-	5P	5P	5P	5P	6P	5P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2P	2P ～ 4P	1P	8P	2P	2P	4P	-	-	-	1P ～ 4P	1P ～ 4P	1P ～ 2P	1P ～ 2P	-	-	-	2.5P	2.5P	1P	5P	4P	2.5P	5P	5P	-	-	-	-
Tool Material Type	Vanadium High-Speed Steel	Cobalt HSS	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Carbide	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Carbide	Carbide	Carbide	High-speed steel	High-speed steel	High-speed steel	High-speed steel	Carbide	Carbide	High-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	High-speed steel	Powder high-speed steel	High-speed steel	Carbide	High-speed steel	Carbide	Carbide	Carbide	Carbide
work material	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Hardness Steel (50-60 HRC)[◎]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Spiral Tap	Thread cutter	Thread cutter	Thread cutter	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Thread cutter	Modification/removal Tool	Modification/removal Tool	Roll tap	Roll tap	Roll tap	Roll tap	Thread cutter	Thread cutter	Roll tap	Spiral Tap	Spiral Tap	Roll tap	Spiral Tap	Roll tap	Spiral Tap	Point tap	Spiral Tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	-	-	-	-	-	-	-	For through hole / For blind hole	For through hole / For blind hole	-	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For blind hole	For through hole / For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	CrN	TiN	TiAlN	TiAlN	TiN	TiN	TiCN	TiCN	TiN	TiN	TiN	TiN	TiN	TiN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	CrN	TiN	TiAlN	Other	Other	Other	TiCN	TiCN	TiCN	TiCN	TiCN	TiN	TiCN	TiCN	TiCN	TiN	TiCN	TiN	TiAlN	TiN	TiAlN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment
Overall Length (L)(mm)	75	80 ～ 210	62 ～ 89	60 ～ 120	34 ～ 175	100 ～ 200	70 ～ 75	100	46 ～ 88	46 ～ 88	55 ～ 95	55 ～ 95	55 ～ 95	55 ～ 95	59 ～ 87	55 ～ 95	30 ～ 46	30 ～ 82	30 ～ 62	62	46	52	70 ～ 105	45	40 ～ 120	40 ～ 80	30 ～ 75	30 ～ 75	40 ～ 105	70 ～ 120	54 ～ 102	54 ～ 102	46 ～ 62	75 ～ 88	88	62	46	36 ～ 62	42 ～ 82	60	70 ～ 75	58 ～ 120	58 ～ 105	58 ～ 105	58 ～ 105

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-22

CTG-16

No0UN

NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

NO.10-24UNC

No.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

S0.4

NO.4-48UNF

NO.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

S0.8

NO.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1 1/2-8UN

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.5 - M6

M2.6

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

M3 - M18

SM3/32

M3.5

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8UN

G5/8

G 5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

M5.5

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

MF7

7 execution M3 - M12

7/8UN

G7/8

G 7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

SM7/32

EGM 8

M8

MF8

No8UN

STI M8

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

EGM 10

M10

MF10

No10UN

STI M10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr 18

M19

M20

MF20

Mf20

M21

M22

MF22

Tr 22

M23

M24

MF24

Tr 24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

M37

M38

M39

M40

M42

M45

M48

M52

M56
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

8P

9 P

9P

22P

22.5P

23P

24P

25P

26P

27P

28P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

42

44

44.5

45

46

47.62

47.625

48

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99.21

100

101

102

104

105

108

109

109.65

110

111

112

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

250

260

270

280

290

300

310

460
Drawing

Clear

Brand

- MISUMI (8)
- Cost Efficient Products ()
- OSG (55)
- CARMEX (35)
- YAMAWA MFG (21)
- SANDVIK (5)
- TANOI MFG (4)
- GUHRING (3)
- NACHI(FUJIKOSHI) (3)
- EIKOSHA (2)
- NS TOOL (2)
- BERNSTEIN AG (0)
- MATADOR (0)
- STAHLWILLE (0)
- RUKO (0)
- SKC (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- ISHIHASHI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- RENNSTEIG (0)
- REX TOOLS (0)
- GEDORE (0)
- ESCO (0)
- FEIN (0)
- NOGAJAPAN (0)
Clear