Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Thread Cutters（Hole type：For blind hole）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 15 Days or Less

?* Information on days to ship and prices

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	174.76 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Planet Cutter Series NC-Planet Cutters WX-PNC

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	324.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mini Mill Thread G55°

CARMEX

For both G (55°) inner and outer diameter thread (MT7).

[Features]
· Mini mill thread is a carbide solid mill thread developed for threading the inside diameter of very small holes.
· Achieves phenomenal performance due to its highly precise blade shape and multiple-layer titanium aluminum nitride coated high performance ultrafine particle carbide (MT7).
· Small diameter threading from M1 x 0.25 (pilot hole diameter φ0.75 mm) is possible.
· Because high-speed cutting can be performed, machining time is shortened.
· The blade length is short (3 ridges), so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.
· Enables thread cutting of difficult-to-cut and high hardness materials.

Select to compare

Configure now
Starting from^∗ ：	203.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	108.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

MISUMI

[Features]
-Carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

MISUMI

The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	213.66 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TS Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	174.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

OSG

The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series MC-Planet Cutters PNGT

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Select to compare

Configure now
Starting from^∗ ：	205.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

OSG

By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

Select to compare

Configure now
Starting from^∗ ：	165.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Select to compare

Configure now
Starting from^∗ ：	244.94 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

GUHRING

Select to compare

Configure now
Starting from^∗ ：	189.20 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Metric Screw (ISO)

CARMEX

Enables internal threading to be performed in a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread G (55°)

CARMEX

Threading can be performed for both internal and external threads with a single pass.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread Unified Screw (UN)

CARMEX

For internal threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread BSPT

CARMEX

For both internal and external threading.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPT

CARMEX

For both inner/outer diameter threads.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread NPTF

CARMEX

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole ISO

CARMEX

Metric thread / for I.D.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	220.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mill Thread G (55°) Solid Carbide with Oil Hole

CARMEX

Whitworth screw, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole BSPT

CARMEX

BSPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole UN

CARMEX

For unified screws and inner diameter screws.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPT

CARMEX

NPT thread, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPS

CARMEX

Internal and external use inch shank.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole NPSF

CARMEX

Inch shank for both inner and outer diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	262.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread with Oil Hole PG

CARMEX

For both internal and external diameters.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	374.95 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole ISO

CARMEX

For metric I.D. thread.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	253.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSPT

CARMEX

For both internal and external threading.

[Features]
· New type of carbide solid mill thread with oil holes inside the spiral groove.
· Efficiently conveys cooling fluid to the cutting edge for smoother machining.
· Especially effective with through holes.
· Effective for cutting powder removal.
· Also suitable for machinery that does not include an external lubricating device.

Select to compare

Configure now
Starting from^∗ ：	294.06 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTZ Jet Mill Thread with Oil Hole BSW

CARMEX

Select to compare

Configure now
Starting from^∗ ：	253.28 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads

CARMEX

For internally threaded metric screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	336.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw

CARMEX

For internally threaded unified screws.

[Features]
· For thread cutting deep, large diameter holes.
· With neck thinly processed and an oil hole, it is suitable for screw-cutting deep holes of medium to thick diameters.
· Stable processing without causing chatter is possible.
· Deep hole drilling can be performed with one pass.
· Blade length is shorter, so cutting resistance decreases.
· Able to thread long blade lengths of up to 3D

Select to compare

Configure now
Starting from^∗ ：	336.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft UNJ

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide and since it has lubrication hole in spiral groove, it is also suitable for machines that do not have external lubrication device.

Select to compare

Configure now
Starting from^∗ ：	205.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Jet Mini Mill Thread for Aircraft MJ

CARMEX

Select to compare

Configure now
Starting from^∗ ：	209.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Mill Thread, No Finishing Flute 60°

CARMEX

It is made of MT8 material with new three-layer PVD coating on ultra-fine particle carbide, and is effective for threading deep holes for both internal and outer diameter threads.

Select to compare

Configure now
Starting from^∗ ：	200.48 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole

CARMEX

With internal coolant hole, up to screw depth D1 x 2.

[Features]
· 3 functions with one tool. (drilling + threading + chamfering).
· Thanks to the circular arc helical machining, thread cutting, chamfering and drilling are completed in one step.
· Drilling tools are not required.
· High-performance tools shorten the cycle time and reduce the machining costs.
· Can be used for both blind holes and through holes.
· Because one tool can be used for drilling, threading, and chamfering, less time is spent replacing tools.
· Thread processing with finished blade can be performed.
· Both right-handed and left-handed threads can be processed with the same tool.

Select to compare

Configure now
Starting from^∗ ：	286.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole

CARMEX

Select to compare

Configure now
Starting from^∗ ：	292.67 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hard Cut ISO

CARMEX

[Features]
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Select to compare

Configure now
Starting from^∗ ：	235.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hard Cut UN

CARMEX

Select to compare

Configure now
Starting from^∗ ：	209.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Slim Head Type Hard Cut MTH ISO

CARMEX

[Features]
· For mini mill thread type hard cuts, we have developed an innovative tool capable of threading high hardness materials up to HRC 62 in one pass.
· Shortens machining time because the same tool can be used for thread cutting and chamfering.
· Compatible with relatively large diameters.
· The unique coating technology demonstrates excellent resistance to abrasion and heat.
· Excellent carbide grade which also handles hardened steel.
· Cutting chips are reduced, providing machining stability.
· The cycle time is short, increasing productivity.
· Supports screw depths up to twice the machining thread diameter.

Select to compare

Configure now
Starting from^∗ ：	256.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultrafine particle carbide and new type three-layer PVD coating

Select to compare

Configure now
Starting from^∗ ：	200.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Select to compare

Configure now
Starting from^∗ ：	200.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

CARMEX

Metric thread / for I.D. thread

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Select to compare

Configure now
Starting from^∗ ：	204.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hard Cut ISO

CARMEX

Now with further improved cutting performance and beautiful surface finishing.

[Features]
· Lineup starting from the very small diameter of M1.4 x 0.3 is available.
· This new tool meets the needs of the mold industry.
· High-speed cutting enabled.
· Shortens the machining time.
· The blade length is short, so cutting load is not applied.
· Can be used to cut the effective thread up to the edge of blind holes.

Select to compare

Configure now
Starting from^∗ ：	375.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	OSG	OSG	CARMEX	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	GUHRING	GUHRING	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX	CARMEX
Product Series	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	Planet Cutter Series NC-Planet Cutters WX-PNC	Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC	Mini Mill Thread G55°	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC	Planet Cutter Series MC-Planet Cutters PNGT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133	Carbide Solid Mill Thread Metric Screw (ISO)	Carbide Solid Mill Thread G (55°)	Carbide Solid Mill Thread Unified Screw (UN)	Carbide Solid Mill Thread BSPT	Carbide Solid Mill Thread NPT	Carbide Solid Mill Thread NPTF	Carbide Solid Mill Thread with Oil Hole ISO	Mill Thread G (55°) Solid Carbide with Oil Hole	Carbide Solid Mill Thread with Oil Hole BSPT	Carbide Solid Mill Thread with Oil Hole UN	Carbide Solid Mill Thread with Oil Hole NPT	Carbide Solid Mill Thread with Oil Hole NPS	Carbide Solid Mill Thread with Oil Hole NPSF	Carbide Solid Mill Thread with Oil Hole PG	MTZ Jet Mill Thread with Oil Hole ISO	MTZ Jet Mill Thread with Oil Hole BSPT	MTZ Jet Mill Thread with Oil Hole BSW	Neck Narrowed Q-Type, with Oil Hole for Inner Diameter Meter Threads	For Large Diameter Unified Screw Type Q for UN Inner Diameter Unified Screw	Jet Mini Mill Thread for Aircraft UNJ	Jet Mini Mill Thread for Aircraft MJ	Carbide Solid Mill Thread, No Finishing Flute 60°	DMT 3in1 ISO Internal Diameter Metric Thread 60° with Internal Lubrication Hole	DMT 3in1 UN Internal Diameter Unified Thread 60° with Internal Lubrication Hole	Hard Cut ISO	Hard Cut UN	Slim Head Type Hard Cut MTH ISO	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters	MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws	Hard Cut ISO
Starting from^∗	174.76 € *Unit price with basic configuration Volume Discount	158.30 € *Unit price with basic configuration Volume Discount	324.46 € *Unit price with basic configuration	203.15 € *Unit price with basic configuration	108.15 € *Unit price with basic configuration Volume Discount	110.98 € *Unit price with basic configuration Volume Discount	213.66 € *Unit price with basic configuration Volume Discount	174.81 € *Unit price with basic configuration Volume Discount	101.50 € *Unit price with basic configuration Volume Discount	205.83 € *Unit price with basic configuration	295.75 € *Unit price with basic configuration	165.90 € *Unit price with basic configuration	244.94 € *Unit price with basic configuration	189.20 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	220.54 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	262.64 € *Unit price with basic configuration	374.95 € *Unit price with basic configuration	253.28 € *Unit price with basic configuration	294.06 € *Unit price with basic configuration	253.28 € *Unit price with basic configuration	336.03 € *Unit price with basic configuration	336.03 € *Unit price with basic configuration	205.15 € *Unit price with basic configuration	209.42 € *Unit price with basic configuration	200.48 € *Unit price with basic configuration	286.71 € *Unit price with basic configuration	292.67 € *Unit price with basic configuration	235.24 € *Unit price with basic configuration	209.84 € *Unit price with basic configuration	256.63 € *Unit price with basic configuration	200.47 € *Unit price with basic configuration	200.47 € *Unit price with basic configuration	204.63 € *Unit price with basic configuration	375.36 € *Unit price with basic configuration
Min. Shipping Days	7 Days	6 Days	6 Days	6 Days	5 Days	5 Days	7 Days	5 Days	6 Days	6 Days	6 Days	6 Days	8 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Screw Types	Meter	Meter / Unified / Taper for Pipe	Meter	Whitworth	Meter	Meter	Meter	Meter	Meter / Unified	Meter / Taper for Pipe / Parallel for Pipes	Meter	Meter	Meter	Meter	Meter	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Meter	Parallel for Pipes	Parallel for Pipes	Unified	Parallel for Pipes	Parallel for Pipes	Parallel for Pipes	Other	Meter	Parallel for Pipes	Whitworth	Meter	Unified	Other	Other	Meter	Meter	Unified	Meter	Unified	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M1.4 ～ M20	-	M6 ～ M12	-	M3 ～ M20	M3 ～ M16	M2 ～ M12	M3 ～ M12	-	-	M6 ～ M12	-	M6 ～ M20	M6 ～ M20	M3 ～ M27	-	-	-	-	-	M4 ～ M24	-	-	-	-	-	-	-	M6 ～ M20	-	-	-	-	-	-	-	-	-	-	-	M3 ～ M12	-	-	M1 ～ M3	-
Pitch (P), Number of Threading(mm)	0.3 ～ 2.5	1 ～ 28	1 ～ 1.75	-	0.5 ～ 2.5	0.5 ～ 2	0.4 ～ 1.75	0.5 ～ 1.75	0.25 ～ 32	1 ～ 19	1 ～ 1.75	0.5 ～ 3	1 ～ 2.5	1 ～ 2.5	0.5 ～ 3	11 ～ 28	-	-	-	-	0.5 ～ 3	-	-	-	-	-	-	-	1 ～ 2.5	-	-	1 ～ 4	-	-	-	-	1 ～ 2	-	0.4	-	0.5 ～ 1.75	-	-	0.25 ～ 0.5	2
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Cobalt HSS	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Quenched and tempered steel (45 to 55 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Tool Steel (Before SKD Hardening)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]
Tap Type	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiAlN	TiAlN	TiAlN	Nitriding Treatment	TiAlN	DLC	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / Other	TiN	TiAlN	TiAlN	TiCN	TiCN	TiAlN	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment	Nitriding Treatment
Overall Length (L)(mm)	39 ～ 105	60 ～ 120	62 ～ 89	64 ～ 105	57 ～ 115	57 ～ 92	58 ～ 73	48 ～ 74	40	80 ～ 210	62 ～ 89	60 ～ 120	54 ～ 102	54 ～ 102	58 ～ 120	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 105	58 ～ 120	64 ～ 105	64 ～ 105	64 ～ 105	64 ～ 73	63 ～ 76	63 ～ 76	84	58 ～ 101	64 ～ 101	58 ～ 73	73 ～ 160	73 ～ 105	58 ～ 73	58 ～ 64	58 ～ 101	64 ～ 84	64	39	39 ～ 84	58 ～ 84	39 ～ 58	39 ～ 64	39	84

Filter by:

Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
Clear

Screw size (Nominal)
NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

NO.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

S0.4

NO.4-48UNF

NO.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

S0.6

NO.6-40UNF

S0.8

NO.8-36UNF

NO.8-32UNC

M1

S1

UNC 1

G1"-3"

G1/2 5/8

G1/4

UNC 1/4

UNF 1/4

1/4-28UNF

1/4-20UNC

G1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M2

UNC 2

M2.2

M2.5

M3

G3/8

M3 - M10

M3 - M12

M3.5

M4

UNC 4

M5

G5/8 3/4

M5 - M12

UNC 5/16

UNF 5/16

M6

MF6

UNC 6

UNF 6

7 execution M3 - M12

M8

MF8

UNC 8

M10

MF10

UNC 10

UNF 10

M12

MF12

Mf12

M12 x 1.5

M14

MF14

M16

MF16

Mf16

M16 x 1.5

M18

M20

MF20

Mf20

M22

M24

MF24

Mf25

M25 x 1.5

M27

MF28

Mf32
Clear

Pitch (P), Number of Threading(mm)
0.025

0.05

0.08

0.1

0.125

0.15

0.2

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

11

11.5

12

13

14

16

18

19

20

24

27

28

32
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Hand Tap
- Thread cutter
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
33

35

36

38

39

40

41

44

45

48

50

51

54

56

57

58

59

60

62

63

64

65

68

69

70

72

73

74

75

76

78

79

80

83

84

85

89

90

92

95

100

101

102

104

105

110

115

120

121

125

145

160

165

175

200

210
Drawing

Clear

Brand

- MISUMI (5)
- Cost Efficient Products ()
- CARMEX (32)
- OSG (6)
- GUHRING (2)
- NS TOOL (1)
- WERA (0)
- SANDVIK (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- GEDORE (0)
- REX TOOLS (0)
- HAZET (0)
- FEIN (0)
Clear

Thread Cutters（Hole type：For blind hole）

Categories related to Thread Cutters

Payment Method

On-Demand Manufacturing

Change View

Certificates

MISUMI worldwide

Social Media

Legal notice