Chamfer, V-Grooves（work material：Stainless Steel）

?* Information on days to ship and prices

• 

  MUGEN Coating C Chamfer Cutter NSCV-M

  NS TOOL

  [Features]
  · Enables easy C chamfering.
  · Uses MUGEN coating that dramatically improves the durability.
  

  Select to compare

  Configure now
  Starting from∗ ：	111.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  MISUMI

  [Features]
  ・Popular 3-flute type for helix angle chambering with high feed rate.
  ・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
  ・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
  ・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
  ・It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Inner Radius Cutter, 2-Flute

  MISUMI

  [Features]
  ・An essential item for corner rounding.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leading Drills, TIN-NC-LDS

  OSG

  TiN Coating Makes Possible Higher Speed and Longer Life than NC-LDS

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SANDVIK CoroMill Plura Solid Carbide End Mill for Chamfer Milling

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	59.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  MISUMI

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  • Volume Discount

  • TiCN
  • 2 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	57.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	116.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute

  MISUMI

  [Features]
  -Ideal for chamfers and V-grooves
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	71.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  MISUMI

  Ideal for the Deep Chamfering of Workpieces

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	48.89 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  MISUMI

  [Features]
  -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
  -The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	42.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 2-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering. Can also be used as a deburring tool
  -Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
  -Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
  -It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
  -Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	38.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide chamfering end mill, 3-flute / short model

  MISUMI

  [Features]
  -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
  -Peripheral grooves allow bevel, contour and spiral cutting
  -The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
  -With helix angle on peripheral flutes
  -Can also be used as a deburring tool
  -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Select to compare

  Configure now
  Starting from∗ ：	46.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS coated carbide inner R-cutter, 2-flute

  MISUMI

  [Features]
  Easy high-quality machining of corner radii
  -It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	50.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carbide inner R-cutter, 2-flute

  MISUMI

  Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

  • Volume Discount

  • Non-Coated
  • General Steel
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	49.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  MISUMI

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  • Volume Discount

  • TS
  • SUS
  • 2 Flutes

  Select to compare

  Configure now
  Starting from∗ ：	74.67 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

  MISUMI

  [Features]
  ・MISUMI's original inner radius cutter specialized for machining high hardness steel.
  ・Ideal for high hardness steel inner radius machining up to 65 HRC.
  ・High-efficiency machining is possible by adopting a 4-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	74.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  MISUMI

  [Features]
  ・Popular chamfering product with helix angle.
  ・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
  ・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	37.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  MISUMI

  [Features]
  ・Machining from positioning to chamfering with a single tool.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfer End Mill 2-Flute

  MISUMI

  [Features]
  ・Recommended for chamfering general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.62 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  MISUMI

  [Features]
  ・Recommended for deep section chamfering of general steel.
  ・Ideal for chamfering and V-groove machining.
  ・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
  ・The long type is ideal for deep cavity milling.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.97 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  MISUMI

  [Features]
  ・The popular high hardness steel chamfer end mill is even more affordable.
  ・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
  ・High-efficiency machining is possible by adopting a 6-flute shape.
  ・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
  ・The finish of the surface roughness of the workpiece after machining is very good.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leading Drills, VP-LDS

  OSG

  V coating enables longer lasting life than TIN-NC-LDS

  Select to compare

  Configure now
  Starting from∗ ：	17.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Negative Type) HSCT-N

  OSG

  End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute, Chamfering Cutter (Positive Type) HSCT-P

  OSG

  End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

  OSG

  End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

  OSG

  Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	78.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Spiral Chamfering Cutter for SV Chamfering Process

  UNION TOOL

  [Features]
  · Carbide spiral chamfering cutter
  · Half Taper Angle of 45°
  · The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Select to compare

  Configure now
  Starting from∗ ：	135.77 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

  OSG

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	44.76 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hole Chamfering Leading Drill V Coating Powder HSS Long Shank

  OSG

  Leading long shank drill with powder metal high speed steel XPM as base material, with 90° V-coated point angle. Ideal for chamfering deep parts.

  Select to compare

  Configure now
  Starting from∗ ：	23.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  GCCC for Carbide Center Chamfering

  SANKO MFG

  [Features]
  · Melding the design concepts of endmills and drills, it is available for a wide range of applications.
  · Double angle adopted for the chamfer part.
  · Provides a clean finish with fewer burrs.

  Select to compare

  Configure now
  Starting from∗ ：	146.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Angular Cutter with TAG Handle G2

  ASAHI TOOLS

  Brazed Shape Milling Cutter for Dovetail Grooving Can be used for thinning hole processing and the like at the bottom of the table groove

  Select to compare

  Configure now
  Starting from∗ ：	162.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CMC MC Chamfering Cutter G2

  ASAHI TOOLS

  Soldering shape, Angle tolerance ±15'.
  Shape accuracy with straight edge.
  Applications, Hole chamfering/bevelling/horizontal run Work material, General steel/heat treated steel/stainless steel/cast iron/aluminium/copper/resin
  Single-edged blade
  2 blades.

  Select to compare

  Configure now
  Starting from∗ ：	113.60 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CS2S Type II Chamfering Cutter (Single Flute), Straight Shank

  OKAZAKI SEIKO

  1-flute type. For steel and stainless steel. All products are TiN coated.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	371.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  CS3S Type III Chamfering Cutter (3-Flute), Straight Shank

  OKAZAKI SEIKO

  3-flute type. For steel and stainless steel. All products are TiN coated.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	102.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  SVM Chamfering Mill, Non-Coated

  OKAZAKI SEIKO

  In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	83.38 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  SVMA Chamfering Mill, OK Coated

  OKAZAKI SEIKO

  In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

  Select to compare

  Configure now
  Starting from∗ ：	104.53 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Carbide Chamfering Cutter KMC-2

  KYOWA SEIKO

  [Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	42.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Carbide Inversed Chamfering Cutter KUMC-4

  KYOWA SEIKO

  4 straight cutting edges.
  45° (one-sided angle)
  Material, general steel/heat-treated steel/stainless steel/cast iron/aluminium
  Single-edged blade
  Tool grade, carbide

  Select to compare

  Configure now
  Starting from∗ ：	109.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Carbide Inversed Chamfering Cutter KUMW-4

  KYOWA SEIKO

  4 straight cutting edges.
  90° (including angle type)
  Working material, General steel/Heat treated steel/Stainless steel/Cast iron/Aluminium/Copper/Resin
  Single-edged blade
  Tool quality, carbide.

  Select to compare

  Configure now
  Starting from∗ ：	109.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  CoroMill Plura General-Purpose End Mill For Round Chamfering, 1U000

  SANDVIK

  Select to compare

  Configure now
  Starting from∗ ：	117.96 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  SPEED / T, 2-Flute, Multi 90°

  SPEED TIGER

  [Features]
  · Blade diameters φ10 or less are high rigidity types with thick shank diameter.
  · A high-lubricity AlTiN coated tool that is ideal for soft materials with a hardness of HRC 45 or less, such as raw materials or stainless steel. Handy to have one in a magazine rack.

  Select to compare

  Configure now
  Starting from∗ ：	42.39 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X

  7 LEADERS

  [Features]
  · 90° Carbide 2-Flute Chamfering V-Grooving End Mill
  · Use for V-grooving, horizontal chamfering, centering, hole chamfering.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Suitable for a wide range of work materials from general steel to aluminum.

  Select to compare

  Configure now
  Starting from∗ ：	47.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Blade for Chamfer / Deburring【1-10 Pieces Per Package】

  NOGAJAPAN

  [Features]
  One blade for chamfering and deburring.
  Compatible base body: compatible holder (EL04003), compatible handle (NG3000), compatible holder (UH1000, SC1400), compatible handle (NC5100), compatible handle (NC5200).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  V Coat XPM 2-Flute (V-Cut Type) V-XPM-VCM

  OSG

  [Specifications]
  · Shanks with diameter 25 mm or more are shanks with 2 flattened cutouts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	81.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N

  OSG

  [Features]
  · A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
  The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
  Significantly reduces turning-back, or burring.
  Excellent chip discharge.
  

  Select to compare

  Configure now
  Starting from∗ ：	79.82 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...