Tooling（Product Category：Attachments/Accessories Page 6）

?* Information on days to ship and prices

• 

  New Baby E Collet for End Mill Only (for Mega New Baby Chuck / New Baby Chuck)

  BIG KAISER

  [Features]
  · A perfectly sized collet for cutting tool shanks, ideal for endmills.

  Select to compare

  Configure now
  Starting from∗ ：	47.74 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Adjustable Torque Wrench Spanner

  MST CORPORATION

  Nut tightening torques can be adjusted more suitably

  Select to compare

  Configure now
  Starting from∗ ：	118.28 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  MST Collet Driver

  MST CORPORATION

  The DETa-1 Collet can be attached and detached easily.
  [Part Number]: DR-1; "Quantity": 2

  Select to compare

  Configure now
  Starting from∗ ：	18.99 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Wrench

  MST CORPORATION

  [Features]
  A wrench for DETa-1 collets.
  ·Holder model: DTA7/DTA12
  ·Overall length: 148.5 mm / 225 mm
  ·Fig.: 3
  ·Tightening torque: 20 to 40 N⋅m / 70 N⋅m

  Select to compare

  Configure now
  Starting from∗ ：	28.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder A Type Rod

  MST CORPORATION

  A collet must be attached to the main unit (DTA3 type). The main unit is equipped with one as standard

  Select to compare

  Configure now
  Starting from∗ ：	21.58 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder E Type Coolant Cap

  MST CORPORATION

  Coolant cap supporting DTE7 and DTE12

  Select to compare

  Configure now
  Starting from∗ ：	47.49 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder E Type Spacer EA Type

  MST CORPORATION

  Optional Coolant-Through System Spacer

  Select to compare

  Configure now
  Starting from∗ ：	41.02 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder E Type Spacer EBM Type

  MST CORPORATION

  Optional Coolant-Through System Spacer

  Select to compare

  Configure now
  Starting from∗ ：	41.02 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder E Type Spacer EBS Type

  MST CORPORATION

  Optional Coolant-Through System Spacer

  Select to compare

  Configure now
  Starting from∗ ：	34.55 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Data One Collet Holder E Type Tap Rod

  MST CORPORATION

  Use As Rotation Stop During Synchronized Tapping

  Select to compare

  Configure now
  Starting from∗ ：	34.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Wrench (for E32-DTB7 / SLK6 / SLK8)

  MST CORPORATION

  [Features]
  A wrench for DETa-1 collets.
  ·Holder model: E32-DTB7/DTB7/DTB12
  ·Overall length: 77 mm / 153 mm / 173 mm
  ·Fig.: 4
  ·Tightening torque: 14,18 N⋅m

  Select to compare

  Configure now
  Starting from∗ ：	14.72 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Wrench (for DTB3)

  MST CORPORATION

  [Features]
  A wrench for DETa-1 collets.
  ·Holder model: DTB3
  ・ Overall length: 110 mm
  ·Fig.: 2
  ·Tightening torque: 2 to 3 N⋅m

  Select to compare

  Configure now
  Starting from∗ ：	47.49 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chuck Handle

  SHINWA RULES

  A chuck handle to be used for opening and closing the chuck on electric drills
  [Features]
  · Selectable from various types according to the model.
  [Applications]
  · For opening and closing of chuck on electric drills.

  Select to compare

  Configure now
  Starting from∗ ：	2.18 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Point Master

  NIIGATA SEIKI

  A presetter ideal for scribing work with milling machines.
  [Features]
  · High precision scribing work can be performed easily by slightly tightening the spindle milling chuck of the milling machine.
  · 60° angle scribing needle equipped as standard (80°tip angle replacement needle available).
  · Tip: With carbide tip.
  · Shank part: φ32 (diam. 32 mm) for K2-32, φ20 (diam. 20 mm) for K2-20.
  [Applications]
  · Can be used as a scribing tool for milling.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	73.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Drill Chuck Arbor

  BLUEBIRD

  A high hardness, heat treated and polished drill chuck arbor.
  [Features]
  Used with drill presses and lathes.

  Select to compare

  Configure now
  Starting from∗ ：	17.33 €
  Min. Shipping Days ：	22 Days

  *Unit price with basic configuration

• 

  Sandvik Face Mill Holder

  SANDVIK

  [Features]
  · A basic holder for face mill holder.
  · Can mount an arbor cutter.

  Select to compare

  Configure now
  Starting from∗ ：	146.64 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Pull Circle (BT30)

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	119.87 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Adapter for Pull Circle (BT30)

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	119.41 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Pull Circle (BT40)

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	87.74 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Pull Circle (BT50)

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	106.66 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Pull Circle Attachment / Removal Tool Dedicated for Pull Bolt Pull Circle Dedicated Bar

  THE CUT

  Select to compare

  Configure now
  Starting from∗ ：	34.03 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Rotary Table T Type Bolt

  TRUSCO NAKAYAMA

  [Features]
  T-shaped screw for adjusting the position of the reference scale.
  -Weight (g): 150

  Select to compare

  Configure now
  Starting from∗ ：	33.35 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Centering Plate SUKEITA Loose

  TRUSCO NAKAYAMA

  Select to compare

  Configure now
  Starting from∗ ：	6.41 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FDC-OH Collet for Cutting Tool with Coolant Hole

  NT TOOL

  [Features]
  · High-precision collet for double-taper cutting tool with coolant hole.
  [Applications]
  · Use for high-precision collet holder HDC/A, stub holder KH/E, etc.
  

  Select to compare

  Configure now
  Starting from∗ ：	85.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ST-S Straight Shank Shrink-Fit Holder

  MANYO TOOLS

  [Features]
  · The grip strength is 3 times that of the collet chuck.
  · Thin with little interference.
  · A well balanced type. Ideal for high speed machining.
  · Excellent runout accuracy 3D tips of 3 μm or less.
  · Length can be adjusted freely.

  Select to compare

  Configure now
  Starting from∗ ：	254.62 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Pull Wrench

  MANYO TOOLS

  [Features]
  · Easy and certain pull bolt removal and refitting.
  · Wrench does not slip when tightening and removing pull bolts, enabling reliable attachment and detachment.
  · Does not fall off even when the wrench is released.
  · The tip does not distort thanks to the heat treatment.

  Select to compare

  Configure now
  Starting from∗ ：	111.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TC-M / MO Type Tap Collet

  KATO MFG

  [Features]
  · TC type without safety device
  · Not affected by processing materials or tap type
  · Side lock (with set screw) specification (SB specification) also available
  · Recommended for mass production machining and CNC controllers
  · Ideal for through screw machining
  · Supports center through coolant supply as standard (TC-MO type only) *Use type with oil hole. The standard specification handles feed pump pressures up to 2 MPa, but the SB specification can support feed pump pressures up to 5 MPa.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	162.56 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cool Arm for High Pressure Coolant / Double Flexible

  NOGAJAPAN

  [Features]
  · A revolutionary coolant hose that can supply coolant to parts to be cut in pinpoint at high pressure up to 1,000 Psi (70 bar).
  · The arm position can be adjusted quickly and easily, enabling cutting of higher quality.
  · The tip nozzle comes in three sizes.
  

  Select to compare

  Configure now
  Starting from∗ ：	287.35 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Chuck Wrench (For Collet Chuck)

  SHOWA TOOL

  Select to compare

  Configure now
  Starting from∗ ：	20.53 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Head Replacement Type End Mill Special Collet For PXM, Short PXMC

  OSG

  [Features]
  · Amazing chip discharge amount achieved with the compact machining center.
  · Improved rigidity achieved by the short protrusion and an ideal rotational balance.
  · A variety of heads.
  · Economical, as the collet can be replaced on its own in cases of trouble.
  [Specifications]
  · Special collet for "OSG PHOENIX PXM Series" heads.

  Select to compare

  Configure now
  Starting from∗ ：	146.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Head Replacement Type End Mill Special Collet For PXM, Extra Short PXMC

  OSG

  [Features]
  · Amazing chip discharge amount achieved with the compact machining center.
  · Improved rigidity achieved by the short protrusion and an ideal rotational balance.
  · A variety of heads.
  · Economical, as the collet can be replaced on its own in cases of trouble.
  [Specifications]
  · Special collet for "OSG PHOENIX PXM Series" heads.

  Select to compare

  Configure now
  Starting from∗ ：	136.70 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Air Line Kit Lubricant

  NAKANISHI

  [Features]
  · Oil for air line kits AL-H1206 and AL-H1207F.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Micro Seal Nut (For Mega Micro Chuck)

  BIG KAISER

  [Features]
  Mega micro seal nut for hole drills and mega micro chucks.

  Select to compare

  Configure now
  Starting from∗ ：	63.00 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Mega Torque Wrench (For Mega Chuck Series)

  BIG KAISER

  [Features]
  Mega torque wrench for mega chuck series.
  Equipped with torque limiter to protect equipment from machine over load.

  Select to compare

  Configure now
  Starting from∗ ：	275.00 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Mega Wrench (For Mega Chuck Series)

  BIG KAISER

  [Features]
  · Even tightening across entire nut periphery using a one-direction clutch.
  · Eliminates risk of the wrench coming off during work.

  Select to compare

  Configure now
  Starting from∗ ：	269.00 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Cleaning Quill

  GIGA SELECTION

  [Features]
  · Can be mounted to an existing machining center (BT/HSK holder type model with through coolant function)
  · Housed in a magazine, is only mounted to the main spindle by ATC when in use, and is removed in the same way
  · Head nozzle is variable from 0 to ±110° (stepless and fixed)
  · Equipped with a fixed bar inside the machine for varying the nozzle angle, and the angle of the arm can be changed automatically when spindle operation X, Y or Z are used so that the arm makes contact with the fixed bar
  · The tip nozzle can swing up to 110° on one side, allowing coolant to also be sprayed on the front side of the spindle
  · Directly mounted on the spindle so it turns when the spindle rotates, allowing repeated spraying via the XY axis
  · When using a horizontal machining center, chip removal is possible in an orthogonal direction with the nozzle at 90°
  · Can be used from the day it is mounted without adding any modifications to the machining center (adjust the nozzle angle manually)
  · Aim the coolant spray at flat sections, including the telescopic cover and machine cover inside the machining center, to provide effective machine maintenance
  · Can be used for many types of chip shapes if the tip nozzle is replaced with a straight or diffusion nozzle (R1/8)

  Select to compare

  Configure now
  Starting from∗ ：	773.35 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Adapter M2.5 - M2

  MITUTOYO

  M2.5 / M2 mm adapter

  Select to compare

  Configure now
  Starting from∗ ：	15.99 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor,Carbon Fiber

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up.

  Select to compare

  Configure now
  Starting from∗ ：	127.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adaptor, Ceramic

  MITUTOYO

  Stylus adapters allow the use of styli and extension components with different thread sizes in the same probing set up. The very lightweight and extremely stiff character of ceramic materials and its low thermal expansion, makes it the ideal material. The brittle characteristic can protect probes from the effects of crash.

  Select to compare

  Configure now
  Starting from∗ ：	75.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...