Magnet Stands（Product Type：Magnetic Stand (Strut Type)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Magnetic Base, Pull Force (N): 784
MISUMI
A standard magnetic base.
For holding a dial gauge.
An essential item for work sites or inspection procedures.
Providing low-priced products with excellent cost performance.Configure nowStarting from∗ ： 40.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Holder with Dial Gauge
NOGAJAPAN
A magnetic stand provided with a dial gauge.
[Features]
· MG6150 is a heavyweight dial gauge holder set. With 80 kgf On/Off magnet.
· DG6150 is a standard dial gauge holder set. With 80 kgf On/Off magnet.
· NF6150 is a mini holder set. Has a 32 kgf on/off magnet.
[Applications]
· Convenient for magnetic holder when making measurement.- Volume Discount
Configure nowStarting from∗ ： 150.72 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base
TRUSCO NAKAYAMA
[Features]
· Including dial gauges with "ears", this supports almost all dial gauges and test indicators.
· Arm tip adopts a multi-clamp system with 6 mm, 8 mm and 3/8 inch holes as well as a dovetail groove.
[Applications]
· Can be used as a holder for measuring instruments.- Volume Discount
Configure nowStarting from∗ ： 89.70 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Magnet Base Standard Type
NIIGATA SEIKI
A magnetic stand used as a measuring holding tool for dial gauges / dial indicators (lever type).
[Features]
· Standard type in which magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 49.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 110.66 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Standard Magnetic Base without Fine Feed (Star-Shaped Cap)
NOGAJAPAN
[Features]
· Standard type magnetic base with main pillar φ12 x 176 mm and sub pillar φ10 x 164 mm.
· With φ6 and φ8 mm holes, it can be held with a gauge lug.
· 80 kgf with On/Off magnet- Volume Discount
Configure nowStarting from∗ ： 70.79 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base, Fine Adjustment, Long
NIIGATA SEIKI
Fine motion type mini magnetic base that's resistant to temperature, excellent in mechanical strength and finely adjustable.
[Features]
· Magnet stand using Alnico magnets, strongly resistant to high temperature and with excellent mechanical strength.
· Two joint, long arm type with more connection joints than conventional products for more flexible movement.
· Fine movement type capable of fine adjustment via the fine adjustment screw. (Fine movement range 0.5 mm)
[Applications]
· Used as a measuring instrument holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 137.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Magnet Base Thick Main Post Type
NIIGATA SEIKI
With thick main-pillar type main pillar and support pillar, the magnetic base enables stable holding.
[Features]
· Main pillar and support pillar are thick specification. Magnetic stand that keeps the measuring instrument stable.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 67.37 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Mini Type
NIIGATA SEIKI
Convenient magnetic base that can be directly installed in narrow places and machinery.
[Features]
· A small magnetic stand ideal for tight spaces.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 67.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base Lock Type
NIIGATA SEIKI
Magnet stand that can lock everything with one knob.
[Features]
· With mechanical lock knob tightening operation, joints can be locked at the same time.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 128.48 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Mini Magnetic Base MB-7
NIIGATA SEIKI
Incredibly convenient magnet stand that can lock everything with one knob and be directly attached to narrow locations and machines.
[Features]
· With mechanical lock knob operation, 3 joints can be tightened at the same time.
· Magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 123.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base B-2
NIIGATA SEIKI
Magnetic stand that can be directly installed in narrow places and machinery.
[Features]
· Alnico magnets are used, so it is strongly resistant to high temperatures and has excellent mechanical strength.
· Fixed type.
[Applications]
· It can be used as a holding assembly for measuring instruments for dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 74.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Magnetic Base B-5
NIIGATA SEIKI
Universal type mini magnetic base that can be set at all angles, using a samarium cobalt magnet with high adsorption power.
[Features]
· Magnetic stand using a samarium cobalt magnet with high adsorption power.
· Universal type which can be set at any angle.
· With a mechanical lock structure, setting and tightening is easy.
[Applications]
· Can be used as a measuring instrument holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 91.27 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Mini Magnetic Base, Fine Adjustment
NIIGATA SEIKI
Magnetic stand that can be directly installed in narrow places and machinery, with fine movement enabled for easy positioning.
[Features]
· Alnico magnets are used, so it is strongly resistant to high temperatures and has excellent mechanical strength.
· 90 mm long arm type capable of measuring distant positions.
· Fine movement type. (Fine movement range 0.5 mm)
[Applications]
· It can be used as a holding assembly for measuring instruments for dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 88.31 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnet Base with Micromotion Adjustment
NIIGATA SEIKI
A type of magnetic base for miniscule motion that makes it is easy to position the dial gauge and indicator.
[Features]
· Fine movement type (2 mm fine movement range) that is easy to adjust.
· Magnetic stand where magnets can be turned On/Off and attached/detached with lever operation.
[Applications]
· Can be used as a measuring holding tool for dial gauges / dial indicators (lever type).- Volume Discount
Configure nowStarting from∗ ： 57.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base (Micro-Motion Type)
TRUSCO NAKAYAMA
[Features]
· Adjuster can be used to make fine adjustment to the retention direction of measuring instruments, etc. (Fine movement range: 2 mm)
[Applications]
· Can be used as a holder for measuring instruments.- Volume Discount
Configure nowStarting from∗ ： 82.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Base (Thick Beam Type)
TRUSCO NAKAYAMA
[Features]
· Main column and strut are of a thick specification that allows measurement tools to be retained with stability.
[Applications]
· Can be used as a holder for measuring instruments.- Volume Discount
Configure nowStarting from∗ ： 93.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mini Type Magnetic Base
TRUSCO NAKAYAMA
[Features]
· Small and lightweight handy type with an adsorption force of 250 N.
[Applications]
· Can be used as a holder for measuring instruments.- Volume Discount
Configure nowStarting from∗ ： 106.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Magnetic Mini Base
TRUSCO NAKAYAMA
[Features]
· It can be set at any angle with a single touch.
· There is no ON/OFF switching for the magnet.- Volume Discount
Configure nowStarting from∗ ： 58.68 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Drawing Holder
TRUSCO NAKAYAMA
[Features]
· Easily attachable magnet type.
[Applications]
· For management and display of drawings.- Volume Discount
Configure nowStarting from∗ ： 135.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Clamp Type Magnet Base without Slow Motion Feed
NOGAJAPAN
[Features]
· Multi-clamp type magnet base without fine feed.
· Has multi-arm system with φ6, φ8 mm, and φ3/8 holes and a dovetail groove on the tip of the same arm as MB1035.
· 80 kgf with On/Off magnet.
· Rotary clamp.
· It is compatible with the stem diameters for 3 types of different dial gauges / test indicators, and uses a multi-clamp system to also hold them easily using a dovetail groove.- Volume Discount
Configure nowStarting from∗ ： 81.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Clamp Type Magnet Base without Slow Motion Feed (Star-Shaped Cap)
NOGAJAPAN
[Features]
· Multi-clamp type magnet base without fine feed.
· Has multi-arm system with φ6, φ8 mm, and φ3/8 holes and a dovetail groove on the tip of the same arm as MB1035.
· With ultra-strong ON/OFF magnet of 80 kgf.
· Rotary clamp.
· It is compatible with the stem diameters for 3 types of different dial gauges / test indicators, and uses a multi-clamp system to also hold them easily using a dovetail groove.- Volume Discount
Configure nowStarting from∗ ： 84.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Large Long Strut Type PH Holder with Fine Tip Adjustment Mechanism
NOGAJAPAN
[Features]
· Noga's new type arm tip PH stand with fine adjustment mechanism.
· With tip fine adjustment mechanism.
· Post type.
· Large long PH holder, 130 kgf. with On/Off magnet.
· The tip is equipped with a rotating clamp, which has φ6, φ8 mm and φ3/8" holes and a dovetail groove, so it can be used to retain almost all test indicators and dial gauges.
· Arm is fully locked using a strong 3-point tightening clamp.- Volume Discount
Configure nowStarting from∗ ： 206.52 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Standard Long Strut Type PH Holder with Fine Tip Adjustment Mechanism
NOGAJAPAN
Noga's new type arm tip PH stand with fine adjustment mechanism. With tip fine adjustment mechanism. Post type standard PH holder 80 kgf with ON/OFF magnet.
[Features]
· The tip is equipped with a rotating clamp, which has φ6, φ8 mm and φ3/8" holes and a dovetail groove, so it can be used to retain almost all test indicators and dial gauges.
· Arm is fully locked using a strong 3-point tightening clamp.
· Arm is nickel-plated. With powerful On/Off magnet.- Volume Discount
Configure nowStarting from∗ ： 140.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
No Fine Adjustment Mechanism Popeye Stand
NOGAJAPAN
[Features]
· On-hand fine adjustment without touching the arm. As the minute feed gear for the gauge is immediately above the magnet, the gauge can be zeroed instantaneously without shaking.
· Popeye Noga Flex is a typical small magnetic base.
· PH3035 Popeye Flex/Popeye Stands are equipped with super strong, compact on/off magnets that weigh 236 g but have an adsorption force of 32 kgf.
· The base of this powerful Popeye Magnet is formed with a 150° V shape, enabling it to be attached to cylindrical surfaces in addition to flat surfaces.- Volume Discount
Configure nowStarting from∗ ： 104.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Standard Magnetic Base with Fine Feed (Star-Shaped Cap)
NOGAJAPAN
[Features]
· Magnetic base with main pillar φ12 x 176 mm and sub pillar φ10 x 152 mm, with micro feed.
· With φ6 and φ8 mm holes, it can be held with a gauge lug.
· 80 kgf with On/Off magnet- Volume Discount
Configure nowStarting from∗ ： 80.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 96.79 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Gauge stands magnetic (31102)
NORELEM
· Adhesive strength 900 N
· Adjustment through a fine adjustment mechanismConfigure nowStarting from∗ ： 286.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Magnetic stands (31120)
NORELEM
· With On/Off switch
· Column diameter 16 mm
· Connector thread at the magnet M10Configure nowStarting from∗ ： 145.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Magnetic stands (31125)
NORELEM
· Adhesive strength 450 N
· Column diameter 16 mm
· Connector thread at the magnet M10Configure nowStarting from∗ ： 72.22 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Product Type |
| Parts Classification |
| Size |
| Adsorption Power(N) |
| Mounting of measuring device |
| Dovetail Groove Y/N |
| Mounting Screw |
| Main pillar(mm) |
| Post(mm) |
| Magnet width(mm) |
| Magnet Depth(mm) |
| Magnet Height(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | NOGAJAPAN | TRUSCO NAKAYAMA | NIIGATA SEIKI | NOGAJAPAN | NOGAJAPAN | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | NIIGATA SEIKI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | NOGAJAPAN | HOZAN | NORELEM | NORELEM | NORELEM |
| Product Series | Dial Gauge / Magnet Holder for Mounting Test Indicator Fulcrum Type | Multi-Clamp Type Magnet Base without Slow Motion Feed (Star-Shaped Cap) | Large Long Strut Type PH Holder with Fine Tip Adjustment Mechanism | Standard Long Strut Type PH Holder with Fine Tip Adjustment Mechanism | ||||||||||||||||||||||||||
| Starting from∗ | 40.41 € *Unit price with basic configuration | 150.72 € *Unit price with basic configuration Volume Discount | 89.70 € *Unit price with basic configuration Volume Discount | 49.13 € *Unit price with basic configuration Volume Discount | 110.66 € *Unit price with basic configuration Volume Discount | 70.79 € *Unit price with basic configuration Volume Discount | 137.29 € *Unit price with basic configuration Volume Discount | 67.37 € *Unit price with basic configuration Volume Discount | 67.12 € *Unit price with basic configuration Volume Discount | 128.48 € *Unit price with basic configuration Volume Discount | 123.53 € *Unit price with basic configuration Volume Discount | 74.74 € *Unit price with basic configuration Volume Discount | 91.27 € *Unit price with basic configuration Volume Discount | 88.31 € *Unit price with basic configuration Volume Discount | 57.42 € *Unit price with basic configuration Volume Discount | 82.38 € *Unit price with basic configuration Volume Discount | 93.73 € *Unit price with basic configuration Volume Discount | 106.30 € *Unit price with basic configuration Volume Discount | 58.68 € *Unit price with basic configuration Volume Discount | 135.52 € *Unit price with basic configuration Volume Discount | 81.98 € *Unit price with basic configuration Volume Discount | 84.56 € *Unit price with basic configuration Volume Discount | 206.52 € *Unit price with basic configuration Volume Discount | 140.00 € *Unit price with basic configuration Volume Discount | 104.76 € *Unit price with basic configuration Volume Discount | 80.70 € *Unit price with basic configuration Volume Discount | 96.79 € *Unit price with basic configuration Volume Discount | 286.47 € *Unit price with basic configuration | 145.91 € *Unit price with basic configuration | 72.22 € *Unit price with basic configuration |
| Min. Shipping Days | 6 Days | 6 Days | 9 Days | 6 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 8 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 4 Days | 4 Days | 4 Days |
| Product Type | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) | Magnetic Stand (Strut Type) |
| Parts Classification | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Size | - | Small | - | Small | Small | - | Small | Small | Small | Small | Small | Small | Small | Small | Small | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Adsorption Power(N) | 784 | - | 800 | 800 | 320 | 800 | 85 | 800 | 250 | 1000 | 250 | 80 | 200 | 65 | 800 | 800 | 800 | 250 | 200 | 800 | 800 | 800 | 1300 | 800 | 320 | 800 | 800 | - | - | - |
| Mounting of measuring device | - | - | ø6, ø8, ø3/8-Inch, with Lug | φ6、φ8 | ø6, ø8, ø3/8-Inch | ø6/ø8 (Can be protected using the gauge lug) | φ6 | φ6、φ8 | φ6 | φ6、φ8 | φ6、φ8 | φ6 | φ6、φ8 | φ6 | φ6、φ8 | ø6, ø8, with Lug | ø6, ø8, with Lug | φ6 | φ6 | - | ø6, ø8, ø3/8-Inch | ø6, ø8, ø3/8-Inch | ø6, ø8, ø3/8-Inch | ø6, ø8, ø3/8-Inch | ø6, ø8, ø3/8-Inch | ø6/ø8 (Can be protected using the gauge lug) | - | - | - | - |
| Dovetail Groove Y/N | Available | - | Available | Available | Available | - | Available | Available | Available | Available | Available | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | Available | Available | - | - | - | - | - |
| Mounting Screw | M8 x 1.25 | - | M8 x 1.25 | M8 x 1.25 | - | M8 x 1.25 | M5×0.8 | M8 x 1.25 | M5×0.8 | M8 x 1.25 | M5×0.8 | M5×0.8 | M5×0.8 | M5×0.8 | M8 x 1.25 | M8 x 1.25 | M8 x 1.25 | M5×0.8 | - | - | M8 x 1.25 | M8 x 1.25 | M10×1.25 | M8 x 1.25 | - | M8 x 1.25 | 1/4" x 20-Thread (JIS B7103) | - | - | - |
| Main pillar(mm) | 176 | 56 | 177 | - | 120 | 176 | - | - | - | - | - | - | - | - | - | 176 | 178 | 54 | - | - | 176 | 176 | 350 | 203 | 120 | 176 | - | - | - | - |
| Post(mm) | 165 | 51 | 164 | - | 110 | 164 | - | - | - | - | - | - | - | - | - | 150 | 165 | - | - | - | 164 | 164 | 225 | 185 | 110 | 152 | - | - | - | - |
| Magnet width(mm) | 60 | - | 50 | 50 | 30 | 50 | 25 | 50 | 30 | 50 | 30 | φ25 | φ35 | 25 | 50 | 50 | 50 | 30 | 31 | 50.5 | 50 | 50 | 50 | 50 | 30 | 50 | - | 50 | 50 | - |
| Magnet Depth(mm) | 50 | - | 60 | 60 | 40 | 60 | 25 | 60 | 35 | 75 | 35 | φ25 | φ35 | 25 | 60 | 60 | 60 | 35 | 31 | 65 | 60 | 60 | 120 | 60 | 40 | 60 | - | - | - | - |
| Magnet Height(mm) | 55 | - | 55 | 55 | 35 | 55 | 30 | 55 | 35 | 55 | 35 | 30 | 32 | 30 | 55 | 55 | 55 | 35 | 33 | 55.7 | 55 | 55 | 55 | 55 | 35 | 55 | - | 55 | 55 | 18 |
Loading...
Filter by:
-
Product Type
- Magnetic Stand (Arm Type)
- Magnetic Stand (Strut Type)
- Magnetic Stand (Work Holder Type)
- Magnetic Stand (Flexible Type)
- Magnetic Stand Parts
-
Parts Classification
- For Arm Type
- For post-type
-
Size
- Large Type
- Small
-
Adsorption Power(N)
-
Mounting of measuring device
-
Dovetail Groove Y/N
- Available
- N/A
-
Mounting Screw
-
Main pillar(mm)
-
Post(mm)
-
Magnet width(mm)
-
Magnet Depth(mm)
-
Magnet Height(mm)
Brand
-
- NIIGATA SEIKI (10)
- NOGAJAPAN (9)
- TRUSCO NAKAYAMA (6)
- NORELEM (3)
- HOZAN (1)
- TECHNOPLAN (0)
- MITUTOYO (0)
- AS ONE (0)
- KANETEC (0)
CAD data type
-
- 2D
- 3D
Categories related to Magnet Stands
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.