Magnet Blocks

?* Information on days to ship and prices

• 

  KMV Type Magnetic Block【2 Pieces Per Package】

  KANETEC

  · Top side (V side) and end face are absorptive surfaces.
  · Switch lever is removable. (Hexagon opposite side is 8 mm)
  · Drip-proof and oil-resistant structure.
  · A 2-piece set.
  · Special grade precision finishing is also available. Contact us in advance.

  Select to compare

  Configure now
  Starting from∗ ：	634.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Magnet V-Block【2 Pieces Per Package】

  KANETEC

  Handle can be either fixed or detached.
  
  [Features]
  · Upper surface (V surface)/tip surface can be adsorbed.
  · Switching lever is removable.
  · (Hexagonal subtense: 8 mm) Has a drip-proof, oil-resistant structure.
  · 1 set of 2 pieces.
  · Premium grade precision finishing is also supported.
  · Consult us in advance.

  Select to compare

  Configure now
  Starting from∗ ：	973.70 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Permanent Magnet Mini V Block【2 Pieces Per Package】

  KANETEC

  [Features]
  · Two units in one pair. Precision finishing for the suction surface and all other used surfaces.
  · Can be turned on and off by rotating 90° with a screwdriver, etc. on the back surface.

  Select to compare

  Configure now
  Starting from∗ ：	907.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Magnet V-Holder

  KANETEC

  [Features]
  · Since workpieces alone can be detached and replaced without changing the fixed position of the holder, work can be done efficiently.
  · ON/OFF switching lever is removable. (Hex socket subtense is 8 mm).
  · Drip-proof and oil resistant construction.
  · Premium grade precision finishing is also supported.

  Select to compare

  Configure now
  Starting from∗ ：	287.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Permanent Magnetic Mini-Chuck with Four Suction Surfaces

  KANETEC

  [Features]
  · Unique utility type mini chuck that can adsorb on all 4 faces.
  · Relay absorption on the workpiece machine tool bed is possible, as is simultaneous adsorption of top and side faces.
  · Can also be used as a guide stopper for fixing the workpiece.
  · Accuracy is flatness: 0.01 mm, parallelism: 0.02 mm, perpendicular angle: 0.03 mm.

  Select to compare

  Configure now
  Starting from∗ ：	2,671.65 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Square Shaped Block (KYA Type)

  KANETEC

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1,239.92 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Magnet V-Block Holder

  MISUMI

  [Features]
  Magnetic V-block holder with ON-OFF switching function.
  Double sides of the V shape and the bottom of the base are attracting surfaces.
  [Application]
  Ideal as a holder during processing and testing.

  Select to compare

  Configure now
  Starting from∗ ：	72.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Free Block

  KANETEC

  [Features]
  · It is possible for the attachment surface to be cut to a depth of 10 mm from the surface or less at shipping.
  · By inserting the workpiece in the grooves, large processing pressure can be handled.
  · Retention of adhesion-resistant carbide materials is possible, as is application to grinding.
  · Can be used for chucking with a magnet chuck.
  · Available in types that allow the magnetic force to be turned on/off and types that cannot switch.

  Select to compare

  Configure now
  Starting from∗ ：	966.85 €
  Min. Shipping Days ：	13 Days

  *Unit price with basic configuration

• 

  V Type Chuck Block (Non-Magnetic Electromagnetic Induction Type)【2 Pieces Per Package】

  KANETEC

  [Features]
  · Since there is no magnetism in the product itself, it is placed on the magnetic chuck to induce magnetism and attract the workpiece.
  · Magnetism can be induced in either the top/side surfaces or the V/side surfaces.
  · Even specially shaped workpieces can be easily dealt with by preparing a chuck block, fully utilizing existing chucks.
  · A set of 2 pieces finished simultaneously (KT-3 and 4 sold individually)

  Select to compare

  Configure now
  Starting from∗ ：	369.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Chuck Block【1-2 Pieces Per Package】

  MISUMI

  [Features]
  Non-magnetic chuck block.
  By using it together with magnetic base and magnetic chuck, and by selecting the size that matches a workpiece and whether or not it has a V-groove, the workpiece can be held in close contact.
  [Application]
  It is ideal for attracting workpieces with shapes that are difficult to attract using only the chuck work surface.

  Select to compare

  Configure now
  Starting from∗ ：	104.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Double Sided Suction V Type Holder

  KANETEC

  [Features]
  · Since workpieces alone can be detached and replaced without changing the fixed position of the holder, work can be done efficiently.
  · ON/OFF switching lever is removable.
  · (Hexagonal subtense: 8 mm) Has a drip-proof, oil-resistant structure.
  · Premium grade precision finishing is also supported.
  · Consult us in advance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	987.80 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Simple Holder For Welding CPH-WP

  TECHNOPLAN

  [Features]
  · A simple magnetic-attraction based holder designed specifically for keeping costs down.
  · Used at welding worksites on ships and on bridges.
  
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	53.10 €
  Min. Shipping Days ：	14 Days

  *Unit price with basic configuration

• 

  V-Groove Block CSB

  TECHNOPLAN

  [Applications]
  · Used for marking and light machining as well as for electrical discharge or for holding work during wire cutting.
  · Can also be used as a holder for 3-dimensional measuring devices and other types of measurement system.
  [Features]
  · Can be adhered on three surfaces—the upper surface (V surface) and both side surfaces.
  · Can be easily switched on and off using the handle.
  
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	988.98 €
  Min. Shipping Days ：	23 Days

  *Unit price with basic configuration

• 

  V-Type Magnetic Holder CVH / CVS

  TECHNOPLAN

  [Applications]
  · Used for making holes, tapping, electric discharge or for holding work when cutting irregular-shaped objects during wire cutting tasks.
  · Can also be used as a holder for 3-dimensional measuring devices and other types of measurement system.
  [Features]
  · A lever type for easily switching the magnetism ON or OFF.
  · Three adsorption surfaces; top, bottom and back (partial.)
  
  

  Select to compare

  Configure now
  Starting from∗ ：	275.21 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

Loading...