Hardness Meters

?* Information on days to ship and prices

• 

  Hardness Meter Diamond Indenter, Rockwell C Scale

  TOKYO DIAMOND

  [Features]
  · A hardness meter measurement probe that takes full advantage of the characteristics of hard diamond
  · Enables highly accurate hardness measurements via its high-precision polishing technology

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	399.09 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rubber Durometer

  TECLOCK

  [Features]
  · Used for devices that measure the hardness of soft rubber, etc.
  · Ideal for measuring softer materials than the usual.
  · Conforms with JIS K 6253 (Type E) standard.
  [Applications]
  · Applicable materials: Soft rubber, film rolls, spinning rolls, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	414.83 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Rockwell Diamond Indenter

  MITUTOYO

  Rockwell diamond indenter with DAkkS calibration certificate without function test according to DIN EN ISO 6508-2 for HRA, HRC, HRD and HRN scales.
  Mitutoyo indenters for Rockwell hardness test.
  As the interface between machine and material, the indenter must be of immaculate quality.
  Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
  The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
  Constant development at our calibration partners secures an unmatched quality level.
  Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
  A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
  Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

  Select to compare

  Configure now
  Starting from∗ ：	418.42 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Ball Indenter, Tungsten Carbide Ball

  MITUTOYO

  Mitutoyo indenters for Brinell hardness test. As the interface between machine and material, the indenter must be of immaculate quality.
  Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
  Product Line: HR-100, HR-200, HR-300, HR-400, HR-500, HR-600, AR-10, AR-2, ARK

  Select to compare

  Configure now
  Starting from∗ ：	236.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball Indenter for Test, Steel Ball

  MITUTOYO

  Mitutoyo indenters for Rockwell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
  The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB. Constant development at our calibration partners secures an unmatched quality level.
  Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18. A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
  Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
  Rockwell ball indenter steel ball for Rockwell plastic test according to ISO 2039-2. Calibration certificate not included.
  Product Line: HR-100, HR-200, HR-300, HR-400, HR-500, HR-600, AR-10, AR-2, ARK

  Select to compare

  Configure now
  Starting from∗ ：	219.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rubber / Plastic Durometer

  TECLOCK

  [Features]
  · JIS K 6253 compliant durometer (hardness tester), the most frequently used durometer for general rubber.
  · Standard type.
  · Conforms with standards as follows: JIS K 6253 (Type A), ISO 7619, ISO 868 and ASTM D 2240 (US standard).
  [Applications]
  · Applicable materials: Rubber, tires, rubber hoses, soft plastic, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	393.94 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rubber / Plastic Durometer (Indicator Type)

  TECLOCK

  [Features]
  · JIS K 6253 compliant durometer (hardness tester), the most frequently used durometer for general rubber.
  · A friction pointer type which retains the maximum value.
  · Conforms with standards as follows: JIS K 6253 (Type A), ISO 7619, ISO 868 and ASTM D 2240.
  [Applications]
  · Applicable materials: Rubber, tires, rubber hoses, soft plastic, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	446.22 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rubber Durometer (Type A Needle Model)

  MURATEC-KDS

  [Features]
  · Pointer returns to 0 when the indenter is removed from the object being measured.
  · Compliant with JIS K 6523 (Type A), ISO 7619, and ASTM 2240 standards.
  [Applications]
  · For normal rubbers (tires, rubber hoses, etc.) and soft plastics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	436.16 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Replacement Ball for Brinell Test

  MITUTOYO

  Mitutoyo indenters for Brinell hardness test.
  As the interface between machine and material, the indenter must be of immaculate quality.
  Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

  Select to compare

  Configure now
  Starting from∗ ：	22.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Shore Durometer

  MITUTOYO

  These compact digital/dial durometers in the Shore A scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including soft rubber, elastomers, natural rubber, casting resin, neoprene, polyesters, soft PVC, leather, etc.

  Select to compare

  Configure now
  Starting from∗ ：	640.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rockwell Hardness Testing Machine

  MITUTOYO

  These are four economical Rockwell hardness testing machines to suit practically every application you need.The Rockwell HR-200/300/400 offers you the following benefits:
  The newly designed frame provides maximum clearance for positioning the work piece, all you need is a flat table for mounting these testing machines.
  They are very simple to operate:
  the analogue type HR-210 uses an automatic presetting dial gauge.
  Digital models HR-430MR/MS use automatic steering wheel braking and load sequencing for easy handling.Digital models HR-320MS and HR-430MR/MS can use our Digimatic Mini-processor (DP-1VR) for printing results, and you can use an input tool (USB-ITN-E) to connect to a PC for data transfer, analysis and storage.
  You can perform Brinell hardness tests by using the following optional accessories:
  a Brinell indenter, a weight set and a measurement microscope.
  Brinell Scales Indentation only Ball 1.0 mm:
  HBW 1/10, HBW 1/30 - indentation only (not according to standard)
  Brinell Scales Indentation only Ball 10.0 mm: HBW 10/100 - indentation only (not according to standard)
  Rockwell Scale Ball 1.5875 mm: HRFW; HRBW; HRGW
  Rockwell Scale Ball 12.7 mm: HRRW; HRSW; HRVW
  Rockwell Scale Ball 3.175 mm: HRHW; HREW; HRKW
  Rockwell Scale Ball 6.35 mm: HRLW; HRMW; HRPW
  Rockwell Scale Diamond: HRA; HRD; HRC
  Standard Accessories:
  810-039 Flat anvil Ø64mm
  810-040 V-anvil outside diameter Ø40mm groove width 30mm
  11AAB941 Water level
  383876 Vinyl cover
  357651 AC adaptor
  Indenters, reference materials and power cord not included

  Select to compare

  Configure now
  Starting from∗ ：	5,494.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Replacement Ball for Rockwell Test

  MITUTOYO

  Mitutoyo indenters for Rockwell hardness test.
  As the interface between machine and material, the indenter must be of immaculate quality.
  Therefore Mitutoyo only uses diamond indenters from the most experienced suppliers.
  The indenters are calibrated in the highest standard calibration laboratories in the DAkkS accreditation body, accredited according to ISO 17025 and traceable to the PTB.
  Constant development at our calibration partners secures an unmatched quality level.
  Rockwell diamond indenter feature DAkkS calibration certificates according to DIN EN ISO 6508-2 and/or ASTM E18.
  A function test, verifying the applicability of the indenter in regard of various indentation depth levels under different test forces, is optionally available.
  Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.
  

  Select to compare

  Configure now
  Starting from∗ ：	55.26 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Leeb Rebound Hardness Testing Device

  MITUTOYO

  The “HARDMATIC” HH–411 is a light-weight portable hardness testing instrument for metal workpieces. It works on the rebound hardness principle (standardized according to ASTM A 956). Measurement is conducted with hardness value L (Leeb-value), however, conversion to any desired hardness scale can be performed.In addition the display automatically shows OK/NG with the tolerance function set and selected.Memory function for 1800 measured values.Automatic measuring direction angle-compensation of the given angle.

  Select to compare

  Configure now
  Starting from∗ ：	3,752.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Leeb Impact Device

  MITUTOYO

  Wide range of detectors.In addition to the standard universal hydraulic impactor (type D), users can choose from a wide range of special hydraulic impactors for special measuring tasks.Type DL:
  for measurements in the tightest ranges, such as welded seams or gear wheels.

  Select to compare

  Configure now
  Starting from∗ ：	2,401.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-338-01 Durom. Type D Compact/Digital

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	1,101.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-338 Durometer Type D Compact/Digital

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	1,101.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-337-01 Durom.Type D Compact/Analogue

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	640.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-337 Durometer Type D Compact/Analogue

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	640.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-334 Durometer Type D Long/Digital

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	1,101.32 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-333 Durometer Type D Long/Analogue

  MITUTOYO

  These compact digital/dial durometers in the Shore D scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including hard rubber, hard plastics, acrylic glass, Polystyrene, rigid thermoplastics, vinyl, cellulose acetate, etc.

  Select to compare

  Configure now
  Starting from∗ ：	640.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HH-329 Durometer E Compact/Digital

  MITUTOYO

  These compact digital/dial durometers in the Shore E scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including soft rubber, elastomers, natural rubber, casting resin, neoprene, polyesters, soft PVC, leather, etc.

  Select to compare

  Configure now
  Starting from∗ ：	1,068.16 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  HH-329 Durometer E Compact/Analogue

  MITUTOYO

  These compact digital/dial durometers in the Shore E scale can test a range of different materials and offer you the following benefits:
  You can use them for testing the hardness of the materials including soft rubber, elastomers, natural rubber, casting resin, neoprene, polyesters, soft PVC, leather, etc.

  Select to compare

  Configure now
  Starting from∗ ：	640.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball Indenter for Test, Tungsten Carbide Ball

  MITUTOYO

  Mitutoyo indenters for Brinell hardness test. As the interface between machine and material, the indenter must be of immaculate quality. Ball holders are made by Mitutoyo, and are supplied without calibration certificate for the included ball.

  Select to compare

  Configure now
  Starting from∗ ：	297.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...