Sheet Metal Scissors
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
ARS Craft Scissors (All-Purpose)
ARS
Smoothly cuts from IV wires to thin plates such as aluminum, copper and tin, and from hard objects such as plastic plates to soft objects such as gauze. An evolved soft grip for minimal fatigue even with continuous use. Hard chrome plating.- Volume Discount
Configure nowStarting from∗ ： 21.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
OT Cutter
MORIMITSU
[Features]
- It can quickly cut simply by sandwiching the steel material between round blades then pulling it.
- Allows the dimensional cutting of galvanized plates using the attached ruler.
- Allows the dimensional cutting of round corrugated plates that are made of galvanized iron and polycarbonate.
- The ultimate hand slitter.
- Leave the cutting of steel plates to this single unit.
[Applications]
- Cutting of colored galvanized steel, corrugated plates, polycarbonate corrugated plates, etc.- Volume Discount
Configure nowStarting from∗ ： 369.95 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Metal Craft (Straight Blade, Curved Blade)
ARS
Can easily cut thin plates (around 0.3-0.5 mm), such as aluminum plates, copper plates, and tin plates.- Volume Discount
Configure nowStarting from∗ ： 24.84 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tinners Snips Straight Blade
MORIMITSU
[Features]
-It is suitable for straight cuts.
-Materials: main body: ultra mild steel SAE1006, blade: Hitachi Yasuki Steel blue paper- Volume Discount
Configure nowStarting from∗ ： 100.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Long Type Scissors (Round Tip: Bend to Left)
BESSEY
[Features]
· Continuous cutting is possible due to the long blades, for large radius.
[Applications]
· Sheet metal.
· Ironwork.- Volume Discount
Configure nowStarting from∗ ： 99.33 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Arm Wrestler (for Galvanized Iron Plate)
HASEGAWA CUTLERY
[Features]
-It is suitable for cutting tinplate.
-Materials: blade: stainless steel, handle: ABS resin.- Volume Discount
Configure nowStarting from∗ ： 27.54 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tin Snips
MCC CORPORATION
[Features]
· Easily cuts straight lines and small curves.
[Applications]
· For cutting tinplate and stainless steel plate.- Volume Discount
Configure nowStarting from∗ ： 59.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Tin Snips
DOUKAN
[Features]
· Forged pieces make for excellent durability.
· Cuts up to 0.5 mm thick mild iron plate.
· It has a large grip that's easy to hold even with gloves on and mitigates fatigue.- Volume Discount
Configure nowStarting from∗ ： 69.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Straight-Blade Snips for Thick Material
MORIMITSU
[Features]
· Can be used for straight cutting of thick plate.
[Applications] For straight cutting of iron or stainless steel plate.- Volume Discount
Configure nowStarting from∗ ： 141.87 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cutting Pliers Wavy Blade
MORIMITSU
[Features]
· Suitable for all types of fine cutting work such as curved cuts or straight cuts.
[Applications] For fine cutting of iron or stainless steel plate.- Volume Discount
Configure nowStarting from∗ ： 121.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Knife for Thick Material
MORIMITSU
[Features]
· Can be used for curved and straight cutting of thick plate.
[Applications]
· Shears for sheet metal machining.- Volume Discount
Configure nowStarting from∗ ： 141.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Snips for Thick Material
MORIMITSU
[Features]
· Ideal for tight curved cutting to drill round holes on thick plates.
[Applications]
· Shears for sheet metal machining.- Volume Discount
Configure nowStarting from∗ ： 140.97 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High Quality Sashimi Knife (SLD Series)
MORIMITSU
[Features]
· Ironsand steel Hitachi SLD steel blades are used.
· Chrome nickel plated surface.
· Sheet metal scissors for professional work.
[Applications]
· For a wide range of cutting use, from straight lines to curves.
· Supports cutting a wide range of plate materials, such as iron, copper, stainless steel and galvalume steel plate.- Volume Discount
Configure nowStarting from∗ ： 150.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Universal metal scissors
TRUSCO NAKAYAMA
[Features]
- With a sharp edge, it can easily cut sheet iron of 1.2 mm thickness.
- Equipped with a strong spring.
- The blade is jagged.
- Equipped with a safety lock.
- It adopts handles with non-slip grips and great fitting properties.- Volume Discount
Configure nowStarting from∗ ： 22.72 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Small Scissors (Left-Folding Type)
BESSEY
Compared with the conventional products, it is a compact design. The small head is extremely functional, and is perfect for cutting small rounded sections, or in narrow spaces. For direct cut left-side rounding.- Volume Discount
Configure nowStarting from∗ ： 51.18 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Scissors "Baritto Scissors"
TJM DESIGN
A serrated blade was used so the cable cannot slip. A dedicated groove is provided on the back of the blade for deburring to remove both curved and straight burrs. A non-slip elastomer grip increases the grip power. Stoppers enable locking with one hand. Use of high carbon blade steel enables cutting even of M bars and other metal thin sheets. With safety rope mounting holes.- Volume Discount
Configure nowStarting from∗ ： 35.67 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 29.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grip Scissors
DOUKAN
[Features]
· Scissors ideal for detailed work.
· The blade is a very fine item made from a material that is forge welded from extremely soft iron and SK-5K steel, and finished meticulously by a craftsman one at a time. Rust-resistant oxidation processing has been applied to the surface.- Volume Discount
Configure nowStarting from∗ ： 32.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Iron-Arm Scissors GT
ENGINEER
[Features]
· Its 4 blades (straight blade, serrated blade, wire cutter and cardboard cutter) can cut any special material flawlessly.
· A guard is attached to prevent the fingers from getting caught when the grip is closed.
· The serrated blade that can cut a variety of materials sharply can even be used to cut super-hard special ultrafine fibers.- Volume Discount
Configure nowStarting from∗ ： 38.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Overall Length(mm) |
| Blade Length(mm) |
| Cutting Capacity: Steel Sheet(mm) |
| Cutting Capacity: Copper Sheet(mm) |
| Cutting Capacity: Stainless Steel Sheet(mm) |
| Cutting Capacity: Colored Steel Sheet(mm) |
| Cutting Capacity: Galvalume Steel Plate(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ARS | MORIMITSU | ARS | MORIMITSU | BESSEY | HASEGAWA CUTLERY | MCC CORPORATION | DOUKAN | MORIMITSU | MORIMITSU | MORIMITSU | MORIMITSU | MORIMITSU | TRUSCO NAKAYAMA | BESSEY | TJM DESIGN | HASEGAWA CUTLERY | DOUKAN | ENGINEER |
| Product Series | |||||||||||||||||||
| Starting from∗ | 21.96 € *Unit price with basic configuration Volume Discount | 369.95 € *Unit price with basic configuration Volume Discount | 24.84 € *Unit price with basic configuration Volume Discount | 100.53 € *Unit price with basic configuration Volume Discount | 99.33 € *Unit price with basic configuration Volume Discount | 27.54 € *Unit price with basic configuration Volume Discount | 59.04 € *Unit price with basic configuration Volume Discount | 69.75 € *Unit price with basic configuration Volume Discount | 141.87 € *Unit price with basic configuration Volume Discount | 121.46 € *Unit price with basic configuration Volume Discount | 141.51 € *Unit price with basic configuration Volume Discount | 140.97 € *Unit price with basic configuration Volume Discount | 150.86 € *Unit price with basic configuration Volume Discount | 22.72 € Special price *Unit price with basic configuration Promotional pricing | 51.18 € *Unit price with basic configuration Volume Discount | 35.67 € *Unit price with basic configuration Volume Discount | 29.38 € *Unit price with basic configuration Volume Discount | 32.80 € *Unit price with basic configuration Volume Discount | 38.50 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Overall Length(mm) | 160 | - | 160 | 235 ～ 340 | 280 | 215 | 225 | 250 | 295 ～ 475 | 220 ～ 315 | 260 ～ 465 | 250 ～ 470 | 200 ～ 290 | 250 | 180 | 185 | 205 | - | 160 |
| Blade Length(mm) | 40 | - | 30 | 52 ～ 90 | 64 | 52 | 30 | 95 | 50 ～ 75 | 53 ～ 75 | 47 ～ 72 | 43 ～ 70 | 55 ～ 67 | 38 | - | 46 | 50 | - | - |
| Cutting Capacity: Steel Sheet(mm) | - | - | 0.5 | 0.4 ～ 0.6 | 1.2 | - | 0.6 | - | 0.6 ～ 1 | 0.5 ～ 0.6 | 0.6 ～ 1 | 0.6 ～ 1 | 0.6 | 1.2 | 1.2 | - | - | - | - |
| Cutting Capacity: Copper Sheet(mm) | - | - | 0.5 | 0.5 ～ 0.8 | 1.2 | - | - | - | 0.8 ～ 1 | 0.6 ～ 0.8 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.8 | 1.5 | - | - | - | - | - |
| Cutting Capacity: Stainless Steel Sheet(mm) | - | - | 0.3 | 0.4 ～ 0.5 | 0.6 | - | 0.6 | - | 0.5 ～ 0.8 | 0.5 | 0.5 ～ 0.8 | 0.5 ～ 0.8 | 0.5 | 0.7 | 0.6 | - | - | - | - |
| Cutting Capacity: Colored Steel Sheet(mm) | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Cutting Capacity: Galvalume Steel Plate(mm) | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Overall Length(mm)
-
Blade Length(mm)
-
Cutting Capacity: Steel Sheet(mm)
-
Cutting Capacity: Copper Sheet(mm)
-
Cutting Capacity: Stainless Steel Sheet(mm)
-
Cutting Capacity: Colored Steel Sheet(mm)
-
Cutting Capacity: Galvalume Steel Plate(mm)
Brand
CAD data type
-
- 2D
- 3D
Categories related to Sheet Metal Scissors
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.