Adhesives

?* Information on days to ship and prices

• 

  LOCTITE 648 bonding agents accessories (K0655)

  KIPP

  Note:
  To fasten bushes, bearings and sleeves in the slide, press and shrink fit. Full surface contact prevents play, corrosion and fretting corrosion.
  
  Special LOCTITE adhesive product, K0655.638....
  Large gap-filling capacity as well as quickly finger-tight. Temperature resistance from -55 °C to +150 °C.
  
  Universal LOCTITE adhesive product, K0655.648....
  Good gap-filling capacity, quickly finger-tight and excellent temperature resistance. Temperature resistance from -55 °C to +175 °C.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.92 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  LOCTITE liquid epoxy metals (97990-3450025)

  NORELEM

  · 2-component epoxy adhesive
  
  · Twin syringe – easy to use
  
  · For rough and poorly fitting surfaces
  
  · High strength

  Select to compare

  Configure now
  Starting from∗ ：	28.58 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M Classic

  WEICON

  Suitable for universal use
  WEICON Flex 310 M Classic adhesive and sealant is strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and is free of silicone, isocyanate, halogens or solvents.
  The product has an ISEGA certificate and can be used as an adhesive in food technology.
  Flex 310 M Classic is an elastic adhesive on an MS polymer basis and is suitable for the bonding of metals, many plastics, ceramic, wood, glass and stone.
  WEICON Flex 310 M Classic can be used in metal construction, tank and apparatus engineering, carriage, vehicle and container construction, ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	18.62 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex + Bond

  WEICON

  Highly elastic and strong
  WEICON Flex+bond is strong, permanently elastic, temperature resistant from -40°C to +90°C (up to +130°C for short periods), weather resistant, resistant to UV rays, overpaintable (wet in wet), sandable, and resistant to ageing and salt water. It is free of silicone, isocyanate, halogens and solvents. WEICON Flex+bond has an ISEGA certificate and can be used as an adhesive in foodstuff technology.
  WEICON Flex+bond can be used to bond nearly all materials to themselves and among each other such as metal, wood, plastic, glass, and ceramics.

  Select to compare

  Configure now
  Starting from∗ ：	10.58 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Aqua-Flex

  WEICON

  Ideal for wet and moist surfaces
  WEICON Aqua-Flex adhesive and sealant is strong, overpaintable (wet in wet), has outstanding ageing stability, and is resistant to weathering, UV rays, freshwater and salt water. It is free of silicone, isocyanate, halogens or solvents.
  Aqua-Flex has an ISEGA certificate and can be used as an adhesive in foodstuff technology.
  WEICON Aqua-Flex is an elastic adhesive and sealant on MS polymer basis for wet and damp substrates. It is suitable for the bonding of numerous materials such as metal, plastic, ceramics, wood, glass and stone.
  Aqua-Flex can be used for pipeline and cable work, tank and apparatus engineering, in ventilation and air conditioning systems, gardening and landscaping, in sanitary installations and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	19.48 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 20

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast cure
  WEICON Contact VA 20 has low viscosity (< 20 mPa•s) and hardens very quickly. VA 20 is suited for the bonding of rubber and plastics and also for precisely fitted metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 100

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer cure
  WEICON Contact VA 100 is a universal type for the bonding of metals, plastic and rubber, both to and among each other.
  VA 100 is ideal for the "do-it-yourself" area, but can also be used in many areas of industry.

  Select to compare

  Configure now
  Starting from∗ ：	4.35 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 110

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer curing
  The special feature of the product is its NSF approval in accordance with ANSI Standard 61 - Drinking Water System components. Thus, VA 110 also meets the highest standards and can be used in sensitive areas such as in the harmaceutical industry, in the manufacturing of cosmetics, in the food industry, in the manufacturing of toys or jewelry industry.

  Select to compare

  Configure now
  Starting from∗ ：	21.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 8406

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics low viscosity, very fast-curing
  WEICON Contact VA 8406 has low viscosity (20-50 mPa•s) and hardens very quickly. It is is suited for the fast fixing and bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EPDM elastomers requiring quick fixing.
  In combination with WEICON CA-Primer, VA 8406 can also be used for polyolefines (PE-polyethylene, PP-polypropylene) and for PTFE and silicones.

  Select to compare

  Configure now
  Starting from∗ ：	9.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 20

  WEICON

  Cyanoacrylate Adhesive for metals, low viscosity, very fast-curing
  WEICON Contact VM 20 has a low viscosity (20-40 mPa•s) and hardens very quickly. It is suited for all types of metal bonds, especially for the bonding of precisely fitted parts in serial production.
  VM 20 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	19.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 250 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  VA 250 Black is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly and with residual elasticity, is rubberfilled and black, and has high peel and impact strength.
  Thanks to its curing with residual elasticity, WEICON Contact VA 250 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. It is best suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	18.25 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Black-Seal

  WEICON

  Extremely resistant against oil and grease
  WEICON Black-Seal adhesive and sealant is black, high-temperature resistant (+280°C/+536°F), free of solvents, strong, oilresistant,
  grease-resistant, pressure-resistant, resistant to ageing and extremely elastic (breaking elongation of approx. 500%).
  Black-Seal is suitable for bonding and sealing in applications where particularly high oil and grease resistance is required.
  WEICON Black-Seal can be used on gearbox, valve and casing covers, oil sumps, water pumps, gears and axles, flanges, tanks and containers, and in many other areas.

  Select to compare

  Configure now
  Starting from∗ ：	13.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 PU

  WEICON

  Polyurethane
  WEICON Flex 310 adhesive and sealant is permanently elastic, strong, overpaintable, and resistant to weather, UV rays, freshwater
  and salt water. It is free of silicone.
  Flex 310 is an elastic adhesive and sealant on Polyurethane basis (PUR) for the bonding and sealing of numerous materials such as metals, plastics, ceramics, wood, glass and stone.
  WEICON Flex 310 can be used in tank and apparatus engineering, carriage, container and vehicle construction, in ventilation and air conditioning systems, the energy and electrical industry and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	15.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LOCTITE liquid epoxy metals (97990)

  NORELEM

  · For repairing cracks or damage
  
  · Machinable after hardening
  
  · High strength
  
  · Very good adhesion
  
  · Resistant to various solvents and lubricants

  Select to compare

  Configure now
  Starting from∗ ：	95.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  LOCTITE threadlocker (97990)

  NORELEM

  · Suitable for applications involving foodstuffs and potable water
  
  · For use with all fastenings
  
  · Various strength grades
  
  · For securing screw threads up to M 36

  Select to compare

  Configure now
  Starting from∗ ：	19.17 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  LOCTITE cleaner (97990)

  NORELEM

  · CFC-free cleaner containing solvents
  
  · For cleaning and degreasing surfaces
  
  · For surface preparation before applying adhesives and sealants
  
  · Fast, residue-free evaporation

  Select to compare

  Configure now
  Starting from∗ ：	15.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Application equipment (97990)

  NORELEM

  · Manual dispensing unit for screwing onto 50/250 ml containers or 150/310 ml cartridges
  
  · Works in any position
  
  · Optimises product consumption
  
  · No cleaning required
  
  · No electric or compressed air connection required

  Select to compare

  Configure now
  Starting from∗ ：	74.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  WEICON VA 1401

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, fast-curing
  WEICON Contact VA 1401 has medium viscosity (100-150 mPa•s) and hardens quickly. It shows good results on fabric, paper, cardboard, cartons, foam rubber and large-pored elastomers.
  VA 1401 is a universal type for the bonding of metals, plastics and rubber, both to themselves and among each other.

  Select to compare

  Configure now
  Starting from∗ ：	9.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 300

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, higher viscosity, longer curing
  WEICON Contact VA 300 has a higher viscosity (200-300 mPa•s) and a longer curing time. It is particularly suited for absorbent and porous products such as wood, cork, leather and ceramics.
  VA 300 is also suited for the bonding of metals, plastics and rubber, both to themselves and among each other.

  Select to compare

  Configure now
  Starting from∗ ：	9.67 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1500

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, high viscosity, slow-curing
  WEICON Contact VA 1500 is highly viscous (1000-1500 mPa•s) and has a slower curing time. The product is suited for the bonding of rubber and plastics and can also be used on absorbent and .porous materials such as wood, cork, leather and ceramics.

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 8312

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast-curing, ISEGA-certified
  WEICON Contact VA 8312 has low viscosity (20-40 mPa•s) and hardens very quickly. VA 8312 is suited for the bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EDPM elastomers.
  In combination with WEICON CA-Primer, VA 8312 can also be used for polyolefines (PE-polyethylene, PP-polypropylene). In combination with WEICON Contact Filler, VA 8312 is suited for the instant bonding and filling of cracks, clefts, holes and uneven surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1460

  WEICON

  Cyanoacrylate Adhesive for special requirements, medium viscosity, longer cuing, low odour and “blooming”
  VA 1460 has a medium viscosity (120-200 mPa•s) and a reduced “blooming” effect. It hardens less quickly, is low in odour when processing and less susceptible to moisture effects after curing.
  WEICON Contact VA 1460 is suited for the bonding of the most diverse products. The product can be used in numerous industrial applications.

  Select to compare

  Configure now
  Starting from∗ ：	31.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1403

  WEICON

  Cyanoacrylate Adhesive for special requirements, high viscosity, slow-curing, low odour and “blooming”
  WEICON Contact VA 1403 is highly viscous (1100-1800 mPa•s), low in odour when processing and has a reduced “blooming” effect. It hardens slowly and is less susceptible to moisture effects after curing.
  VA 1403 is suited for the clean and visually attractive bonding of the most diverse products.

  Select to compare

  Configure now
  Starting from∗ ：	31.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1408

  WEICON

  Cyanoacrylate Adhesive for special requirements, low viscosity, fast-curing, low odour and “blooming”
  WEICON Contact VA 1408 has a low viscosity (20-40 mPa•s) and a reduced “blooming” effect. It hardens quickly, is low in odour when processing and less susceptible to moisture effects after curing. The product is suited for the clean and visually attractive bonding of the most diverse products.

  Select to compare

  Configure now
  Starting from∗ ：	31.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 120

  WEICON

  Cyanoacrylate Adhesive for metals, medium viscosity, slower curing, a short-term realignment of parts is possible
  WEICON Contact VM 120 has a medium viscosity (100-130 mPa•s) and a longer curing time allowing short-term position corrections of the parts to be bonded.
  WEICON Contact VM 120 is suited for all types of metal bonds.
  WEICON Contact VM 120 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	19.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 2000

  WEICON

  Cyanoacrylate Adhesive for metals, high viscosity, slow-curing, allows realignment of parts
  WEICON Contact VM 2000 is highly viscous (1700-2000 mPa•s) and hardens slowly, which enables position correction of the parts to be bonded.
  VM 2000 is suited for all types of metal bonds and can also be used on absorbent and porous products.

  Select to compare

  Configure now
  Starting from∗ ：	19.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Contact GEL

  WEICON

  Cyanoacrylate Adhesive for special requirements, pasty (highly thixotropic), very slow-curing = position correction
  Contact Gel is pasty (highly thixotropic; 60000-90000 mPa•s) and hardens very slowly. By using WEICON Activator Spray, the cure time can be reduced.
  WEICON Contact Gel is suited for porous surfaces and higher tolerance gaps and can be used on vertical surfaces. Positioning is also possible after the parts have been joined.
  WEICON Contact Gel is suited for the bonding of the most diverse products.
  WEICON Contact Gel can be used both in the hobby sector and in model building. It can also be used in many different industrial applications.

  Select to compare

  Configure now
  Starting from∗ ：	16.00 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 2500 HT

  WEICON

  Cyanoacrylate Adhesive for special requirements, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 2500 HT is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly with residual elasticity and has high peel and impact
  strength. Thanks to its curing with residual elasticity, WEICON Contact VA 2500 HT is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. VA 2500 HT is suited for the bonding of the most diverse
  rubber materials and plastics and also for metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	18.25 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 30 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, medium viscosity, longer curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 30 Black has medium viscosity (300 mPa•s) and is temperature resistant between -50°C (-58°F) and +135°C (+275°F). It has a longer curing time, is rubber-filled and black, hardens with residual elasticity and has high peel and impact strength. Thanks to its curing with residual elasticity, WEICON Contact VA 30 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity.
  VA 30 Black is ideally suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	18.25 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Contact Filler

  WEICON

  Fillers for instant bonding and filling-in of clefts and cracks, holes as well as unlevelled surfaces in conjunction with WEICON Contact Adhesive VA 8312.
  Contact Filler should be applied in layers: adhesive - filler - adhesive
  After curing is completed, the material can be sanded and overpainted.

  Select to compare

  Configure now
  Starting from∗ ：	8.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Dosing Tips Type A

  WEICON

  Dosing tip for all WEICON Easy-Mix types. WEICON RK-7000/-7100/-7200, RK 7300 for even finer dosing.

  Select to compare

  Configure now
  Starting from∗ ：	1.85 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Silicone A

  WEICON

  Acetate cross-linking
  WEICON Silicone A adhesive and sealant contains no solvents, has acetate-crosslinking properties, is strong, permanently elastic, resistant to ageing and chemicals, temperature resistant up to +200°C (+392°F), extremely elastic (breaking elongation >500%) and can be used universally. Silicone A adheres very well to steel, aluminium, glass, ceramics, and many additional materials.
  WEICON Silicone A can be used in machine and system construction, ventilation and air conditioning systems, in the energy and electrical industry, in exhibition construction and shopfitting and in many additional industrial applications.

  Select to compare

  Configure now
  Starting from∗ ：	9.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Silicone HT-300

  WEICON

  High temperature resistant
  WEICON HT 300 adhesive and sealant is red, high-temperature resistant (+300°C/+572°F), free of solvents, strong, and has acetatecross-linking properties. It is resistant to weathering, ageing and chemicals and is extremely elastic (breaking elongation of approx. 500%).
  HT 300 is particularly suitable for heatexposed bonds and seals and adheres very well to steel, aluminium, glass, ceramics and many additional materials.
  HT 300 can be used in industrial furnaces, flue gas systems, heating installations, exhaust gas routing, heating cabinets and in many additional areas.

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Silicone F

  WEICON

  Liquid, self-levelling
  WEICON Silicone F casting and sealing compound is liquid, self-levelling, spreadable, free of solvents and has acetate-crosslinking properties. It is resistant to weathering and ageing, temperature resistant up to +180°C (+356°F), extremely elastic (breaking elongation of approx. 370%) and can be used universally.
  Silicone F can be specially used for elastic bonds, insulation and impregnation and even for the sealing and casting (max. 10 mm) of technical components. It adheres well to steel, aluminium, glass, ceramics, and many additional materials.
  Silicone F can be used in machine and system construction, in plastic processing, the energy and electrical industry, in exhibition construction and shopfitting and in many additional industrial areas.

  Select to compare

  Configure now
  Starting from∗ ：	26.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Cartridge Gun “Standard”

  WEICON

  For low and medium viscosity adhesives. Suitable for standard cartridges up to 310 ml.

  Select to compare

  Configure now
  Starting from∗ ：	20.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M 2K

  WEICON

  Fast-curing
  The WEICON Flex 310 M 2 K adhesive and sealant is very strong, non-corrosive, overpaintable (wet in wet), sandable, weather-resistant, resistant to UV rays and is free of silicone, isocyanate, or solvents.
  Flex 310 M 2 K is a strong 2-component system on a hybrid polymer basis which enables fullsurface bonding of larger parts and which can be used to fill gaps of up to ten millimetres. It is suitable for the bonding of almost all materials such as metal and many plastics.
  WEICON Flex 310 M 2 K can be used in metal construction, tank and apparatus engineering, machine and system construction, in the furniture industry, in ventilation and air conditioning systems, in the electrical industry, yacht and boat construction and in all applications where
  silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	53.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M Crystal

  WEICON

  Crystal-clear curing
  WEICON Flex 310 M Crystal adhesive and sealant is transparent, strong, overpaintable (wet in wet), sandable, has outstanding aging stability and good resistance to UV rays. It is resistant to freshwater and salt water and contains no silicone, isocyanate, halogens or solvents.
  WEICON Flex 310 M Crystal has an ISEGA certificate and can be used as an adhesive in food technology. WEICON Flex 310 M Crystal is an elastic adhesive on an MS polymer basis and is suitable for the bonding of glass, PC*, PMMA* and acrylic glass* (* = tension-free bonding only), metals, many plastics, ceramics, wood and stone. The product is crystal clear after curing and is particularly suited for elastic joints where the adhesive should or must not be visible.
  Flex 310 M Crystal can be used in plastic processing, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, the electrical and lighting industry, in exhibition stand construction and shopfitting and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	19.85 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Fast-Bond

  WEICON

  Fast-curing, one-component structural and assembly adhesive for universal use on polyurethane basis (PUR)
  Fast-Bond structural and assembly adhesive is strong, overpaintable, sandable, and resistant to weathering, UV rays, freshwater and salt water. It is free of silicone or solvents.
  WEICON Fast-Bond is suitable for the bonding of MDF panels, wood panels, chipboards, fibre and plaster boards, concrete, marble, natural and artificial stone, ceramics, gypsum, metals and rigid foams.

  Select to compare

  Configure now
  Starting from∗ ：	21.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Silicone N

  WEICON

  Neutral-curing
  WEICON Silicone N adhesive and sealant is free of solvents, is neutrally vulcanizing, strong, permanently elastic, resistant to weathering, ageing and chemicals, temperature resistant up to +180°C (+356°F), extremely elastic (breaking elongation of approx. 800%) and can be used universally.
  Silicone N adheres very well to all metals, glass, ceramics, and many additional materials.
  WEICON Silicone N can be used in plastic processing, the electrical industry, energy technology, the lighting industry, exhibition construction and shopfitting and in many additional industrial areas.

  Select to compare

  Configure now
  Starting from∗ ：	18.95 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Smoothing Agent

  WEICON

  The Smoothing Agent is a transparent mixture of non-ionic surface activators. Applying it makes it possible to easily and cleanly smooth off all WEICON elastic adhesives and sealants such as silicone, MS polymers, polyurethane, etc. prior to skin formation.

  Select to compare

  Configure now
  Starting from∗ ：	12.82 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Speed-Flex

  WEICON

  Replaces traditional fixings
  WEICON Speed-Flex is very strong, pasty, stable, overpaintable (wet in wet), resistant to ageing, weathering, and UV rays and is free of silicone, isocyanate and halogen. WEICON Speed-Flex has an ISEGA certificate and can be used as an adhesive in foodstuff technology.
  WEICON Speed-Flex is an adhesive on an MS polymer basis with extremely strong initial strength and is suitable for the bonding of metals, many plastics, ceramics, wood, glass and stone.
  Speed-Flex replaces traditional fixings such as screws, pegs, rivets, etc.
  The very high initial strength makes bonding possible even on vertical surfaces in indoor and outdoor areas.
  WEICON Speed-Flex can be used for drywall and interior work, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, in exhibition stand construction and shopfitting and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	19.07 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Speed-Flex Crystal

  WEICON

  WEICON Speed-Flex Crystal replaces traditional fixings like screws, pegs, rivets etc.
  Due to the very high initial adhesion, bonding is possible even on vertical surfaces both in-house and outside. Particularly suitable for optically demanding bondings when the adhesive bead is not to be visible. Thus e.g. transparent plastics, acrylic glass or other materials can be bonded rapidly, neatly and attractively among each other.
  WEICON Speed-Flex Crystal can be used for drywall and interior work, metal construction, tank and apparatus engineering, in ventilation and air conditioning systems, in exhibition stand construction and shopfitting and in many other cases.
  WEICON Speed-Flex Crystal is very strong, pasty, stable, resistant to ageing, weathering and UV rays and is free of silicone, isocyanate and halogen. ISEGA certificate for use in food technology.

  Select to compare

  Configure now
  Starting from∗ ：	20.22 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M Super-Tack

  WEICON

  High initial strength
  WEICON Flex 310 M Super-Tack adhesive and sealant is very strong, non-corrosive, overpaintable (wet in wet), sandable, weather-resistant, resistant to UV rays and is free of silicone, isocyanate, halogens or solvents.
  Flex 310 M Super-Tack is a strong, elastic adhesive on an MS polymer basis. Both the very high initial bonding power and the fast development of adhesive strength enable bonds to be achieved even on vertical surfaces.
  WEICON Flex 310 M Super-Tack is suitable for the bonding of metals, many plastics, ceramics, wood, glass and stone. It replaces screws, pegs, rivets and other traditional fixings.
  Flex 310 M Super-Tack can be used for drywall and interior work, in metal construction, tank and apparatus engineering, ventilation and air conditioning systems, in yacht and boat constructions, exhibition stand construction and shopfitting and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	20.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M HT 200

  WEICON

  High temperature resistant
  WEICON Flex 310 M HT 200 adhesive and sealant is highly temperature resistant, overpaintable (wet in wet), sandable, has outstanding ageing resistance, and is free of silicone, isocyanate, halogens or solvents.
  Flex 310 M HT 200 is an elastic adhesive on an MS polymer basis which can be used for structural bonding in industrial applications.
  The high temperature resistance also makes it possible to bond and seal components needing to be subsequently thermal-coated.
  WEICON Flex 310 M HT 200 can be used in metal construction, in ventilation and air conditioning systems, carriage, container, wagon and vehicle construction and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	21.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Solar-Flex

  WEICON

  Developed for solar industry
  WEICON Solar-Flex® is strong, non-corrosive, overpaintable (wet in wet), weather-resistant and resistant to UV rays. It is free of silicone, isocyanate, halogens and solvents.
  WEICON Solar-Flex® is an elastic adhesive on a MS polymer basis specially developed for the solar industry.
  Both the very high initial bonding power and the fast development of adhesive strength enable bonds to be achieved even on vertical surfaces. Replaces traditional fixings in the assembly of solar and photovoltaic power systems.

  Select to compare

  Configure now
  Starting from∗ ：	22.90 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...