ENGINEER Pliers/Nippers/Pincers
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Precision Crimper PA-09
ENGINEER
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Crimp height can be adjusted. Provides excellent visibility during crimping.
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 1.25 mm to 1.5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer with excellent oil resistance for the grip.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
· The set pin lets you easily adjust for looseness that occurs over long periods of use.
[Applications]
· Crimping work for ultra-small contact pin.- Volume Discount
- Stock
Starting from∗ ： 70.17 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Long Nose Radio Pliers
ENGINEER
The long nose is ideal for work in narrow, hard-to-reach places.- Volume Discount
Starting from∗ ： 26.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Precision Crimping Pliers (Die Exchange Type)
ENGINEER
Crimping pliers capable of handling more than 300 types of terminals with 3 interchangeable dies.
[Features]
· Crimped with high-precision die, for amazingly fine finish.
· Can be replaced with separately sold die to handle more terminals.
· Equipped with a replaceable-type die, it is convenient to carry.
· With wire stripper and cutter (PAD-11, PAD-12, PAD-13).
· Can be mounted on the PAD-11, 12, 13 main units (PAD-11S, PAD-12S, PAD-13S).
[Applications]
· Ideal for crimping of various terminals in electrical work, trial manufacture of electronic equipment, etc.- Volume Discount
Starting from∗ ： 41.21 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Precision Crimper PA-21
ENGINEER
Pliers capable of crimping 100 or more kinds of terminals into the desired shape.
[Features]
· Inexpensive and light-weight.
· Crimp height can be adjusted when crimping. Provides excellent visibility during crimping to reduce errors.
· Compatible with a wide variety of terminals since core barrels and coated wire barrels are crimped separately.
· It adopts a new die shape and also supports the long terminal of a spring (barrel).
· The die is precision finished. The grip boasts excellent oil resistance, and uses environmentally-friendly elastomer.
[Applications]
· 4 dies enable AWG26 to 18 compliant terminals to be crimped.
· Optimal for ultra-small connector crimping.- Volume Discount
Starting from∗ ： 75.99 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Neji-Saurus RX PZ-59
ENGINEER
Excellent, highly evolved pliers that include cutting, turning and grasping in accordance with professional expectations.
[Features]
· Thin due to the new technology "gear teeth".
· By adopting a T type grip, weight reduction has been achieved while remaining strong and providing higher torsional resistance.
· By optimizing the vertical tooth angle (internationally patented), the screw head can be securely grasped with a frictional force that is higher than ever.
· Compared to conventional products, the force engaging the screw is improved greatly, so it is possible to turn the screws steadily with less power.
· The unique tip shape (internationally patented) enables firm grip and rotation, even on truss screws with a recessed head.
[Applications]
· Usable for removing screws with stripped heads and rusty screws.- Volume Discount
- Stock
Starting from∗ ： 42.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Wire Stripper (for Ultra Fine Wire, Thin Wire, Thick Wire)
ENGINEER
A high-performance stripping unit with excellent sharpness and wear resistance.
[Features]
· Utilizes precision polishing finishing and achieves a shape that is extremely close to a perfect circle.
· Maintains outstanding sharpness without damaging the core wire.
· The stripping hole is designed to fit both stranded wires and solid wires.
· High-carbon steel body for excellent resistance to wear.
· Boasts excellent oil resistance.
· Uses an eco-friendly elastomer design for the grip.
[Applications]
· Optimal for stripping stranded and single wires.- Volume Discount
Starting from∗ ： 42.09 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Miniature Long Nose Pliers PS-03
ENGINEER
Miniature long-nosed plier ideal for working in narrow and deep spaces.
[Features]
· Does not damage the held object as there are no serrations on the inner side of the tip.
· Spring allows continuous work without causing fatigue.
· Anti-static grip makes it safe to work on circuit boards.
[Applications]
· Ideal for lead forming and lead correction, as well as for working in narrow and deep spaces.- Volume Discount
Starting from∗ ： 30.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Neji-Saurus M2 PZ-57
ENGINEER
The "Neji-Saurus" tool series can remove stripped screws with a tip engraved with a vertical groove.
[Features]
· Pocket size at 120 mm, weight is just 100 g.
· The tip has a slim design.
· Uses environmentally friendly elastomer resin material that tightly fits to hands.
· Supports Anti-static ESD Countermeasures
· Enables secure work on substrates with a surface resistance value of 1 x 10^6 to 10^7 Ω/sq (not an insulated tool).
· With a strap hole ideal for drop prevention.
[Applications]
· M2 or smaller, ultra-small stripped screws and specialty screws can be removed from printed circuit boards or electronic equipment.- Volume Discount
Starting from∗ ： 32.56 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Neji-Saurus Z PZ-60
ENGINEER
Longnose pliers type Neji-Saurus can remove screws in narrow, deep locations.
[Features]
· Uses "gear teeth" that can reliably grasp thin objects such as shim plates.
· T-shaped grip cross section, lightweight to prevent grip torsion.
· Thin wires can also be cut easily with little force.
[Applications]
· Optimal for removal of stripped screws or special screws, etc., in narrow, deep locations.- Volume Discount
Starting from∗ ： 39.06 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
E-Ring Pliers PZ-01 / 02
ENGINEER
Pliers ideal for attaching/removing E-rings.
[Features]
· A specially constructed tip is inserted in the gap between the shaft and the E-ring.
· The magnetized tip ensures that the E-ring is securely held.
· Made of high carbon steel.
[Applications]
· For work attaching/removing E-rings.- Volume Discount
Starting from∗ ： 29.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Strip Gauge
ENGINEER
[Features]
· Wire Stripper Option
· Attach the strip gauge to set the length of the coating to be stripped from 1 mm to 24 mm.
[Features]
· Attach the strip gauge to set the length of the coating to be stripped from 1 mm to 24 mm.- Volume Discount
Starting from∗ ： 7.28 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Neji-Saurus PZ-55
ENGINEER
A tool that can remove screws that cannot be removed with a screwdriver, such as crushed screws and rusted screws.
[Features]
· The vertical groove on the tip ensures a firm grip to M screw heads.
· Pliers that firmly grip and remove stripped, rusted, and stuck screws.
· Work can be done in narrow spaces since it is possible to grip vertically with the tip grasping part.
· A multi-serration type.
[Applications]
· It can be used for removing crushed screws and rusted screws.- Volume Discount
Starting from∗ ： 32.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Miniature Longnose Pliers PS-01
ENGINEER
Needle nose type pliers ideal for precision work.
[Features]
· Uses environmentally friendly elastomer resin and gently fits to hands.
· It has support for ESD anti-static countermeasures, with a surface resistance value of 1 x 10⁶ to 10⁷ Ω/sq. that allows secure work on circuit boards.
[Applications]
· For detailed work.
· For detailed work on copper wire, thin wire bending, cutting and precision work.- Volume Discount
Starting from∗ ： 26.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Miniature Lead Pincers PS-04
ENGINEER
Optimal lead pliers for professionals, for precision work with extremely thin square tips.
[Features]
· As there are no serrations on the holding portion, the object is not scratched.
· Uses environmentally friendly elastomer resin and gently fits to hands.
· The grip part supports ESD anti-static countermeasures, with a surface resistance value of 1 x 10⁶ to 10⁷ Ω/sq. that allows secure work on circuit boards.
[Applications]
· For detailed work.
· For detailed work on copper wire, thin wire bending, cutting and precision work.- Volume Discount
Starting from∗ ： 25.85 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Longnose Pliers
ENGINEER
[Features]
· Easy-to-use, highly durable practical type.
· Material: High carbon steel.- Volume Discount
Starting from∗ ： 21.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lead Pliers
ENGINEER
[Features]
· As there are no serrations on the holding portion, the object is not scratched.
· Material: Stainless steel- Volume Discount
Starting from∗ ： 25.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Precision Crimper PA-20
ENGINEER
Pliers that are convenient for crimping small terminals of half-pitch connectors, etc.
[Features]
· Precision crimping of small-/medium-sized contacts is possible, at light weight and low cost.
· 4 die sizes enable terminals with pitch equivalent to 2.5 mm to 5 mm to be crimped.
· With thin die specifications. Uses an eco-friendly elastomer for the grip. Boasts excellent oil resistance.
· The surface of the body is finished with high-quality black oxide fluoropolymer.
[Applications]
· Ideal for crimping extremely small, thin-walled pins.- Volume Discount
Starting from∗ ： 69.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Electrician's Pliers PD-06 – 08
ENGINEER
Excellent electrical pliers boasting outstanding cutting force and durability.
[Features]
· It is a soft grip which fits well in the hand.
[Applications]
· Electrical work, metalworking, assembly and repair of machine components, etc.- Volume Discount
Starting from∗ ： 24.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stripper Blade PA-30
ENGINEER
Equipped with a stopper that can freely adjust the strip length between 2 and 20 mm.
[Features]
· Just by holding the grip, a flat cable with a width of 12 mm or less can be easily stripped in a single action.
· Solid wires from AWG20 to 10 can be stripped.
* The core may be disconnected when stripping wires with a thin insulating coating (such as fluoropolymer wire).- Volume Discount
Starting from∗ ： 35.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Round Pliers PM-06
ENGINEER
Optimal for the bending of wires, wire casting, and coiling
[Features]
· Round-nose tip.
[Applications]
· Optimal for the bending of wires, wire casting, and coiling.- Volume Discount
Starting from∗ ： 28.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Neji-Saurus GT PZ-58
ENGINEER
An elastomer grip that is environmentally friendly and easy to grip has been adopted for these pliers that are even capable of removing truss screws with stripped heads.
[Features]
· The tip of the new design also accommodates low head screws, and holds the screw further firmly by adjusting the bite angle of the screw.
· By mounting the blade part, they can also be used as cutting pliers.
· Includes a spring for easy continuous operation and is equipped with an elastomer design grip that is gentle on both the hands and the environment.
· The lightweight T-type grip provides more resistance to torsion, and enables it to grasp the head of the small screw that cannot be removed.
· A rescue tool for screw troubles, essential for field maintenance.
· Made of high carbon steel.
[Applications]
· Usable for tightening and removing screws with stripped heads, rusted screws and specially shaped screws.- Volume Discount
Starting from∗ ： 33.21 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Neji-Saurus DF (Defense Force)
ENGINEER
A new Neji-Saurus incorporating the Japan Ground Self-Defense Force specifications- Volume Discount
Starting from∗ ： 39.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Product Category |
| Plier Type |
| Plier Type |
| Nipper Type |
| Overall Length(mm) |
| Shaft/hole |
| With or without Spring |
| Steel Wire Cutting Performance(φ/mm) |
| Copper Wire Cutting Performance(φ/mm) |
| Piano Wire Cutting Performance(φ/mm) |
| Plastic Cutting Performance(φ/mm) |
| Stranded Wire Cutting Ability(φ/mm) |
| Stainless steel cutting ability(φ/mm) |
| VA (VVF) Wire Cutting Capacity(φ/mm) |
| With/without tip claw replacement function |
| Tip claw diameter(mm) |
| Compatible Ring Size(mm) |
| Parts Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER | ENGINEER |
| Product Series | ||||||||||||||||||||||
| Starting from∗ | 70.17 € *Unit price with basic configuration Volume Discount | 26.53 € *Unit price with basic configuration Volume Discount | 41.21 € *Unit price with basic configuration Volume Discount | 75.99 € *Unit price with basic configuration Volume Discount | 42.17 € *Unit price with basic configuration Volume Discount | 42.09 € *Unit price with basic configuration Volume Discount | 30.98 € *Unit price with basic configuration Volume Discount | 32.56 € *Unit price with basic configuration Volume Discount | 39.06 € *Unit price with basic configuration Volume Discount | 29.02 € *Unit price with basic configuration Volume Discount | 7.28 € *Unit price with basic configuration Volume Discount | 32.03 € *Unit price with basic configuration Volume Discount | 26.25 € *Unit price with basic configuration Volume Discount | 25.85 € *Unit price with basic configuration Volume Discount | 21.27 € *Unit price with basic configuration Volume Discount | 25.35 € *Unit price with basic configuration Volume Discount | 69.65 € *Unit price with basic configuration Volume Discount | 24.90 € *Unit price with basic configuration Volume Discount | 35.89 € *Unit price with basic configuration Volume Discount | 28.94 € *Unit price with basic configuration Volume Discount | 33.21 € *Unit price with basic configuration Volume Discount | 39.00 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days |
| Specifications |
|
| ||||||||||||||||||||
| Product Category | Pliers | Pliers | Pliers / Parts | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Parts | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers | Pliers |
| Plier Type | - | - | - | - | - | - | - | Pliers | - | Pliers | - | Pliers | - | - | - | - | - | - | - | - | Pliers | - |
| Plier Type | Pliers | Longnose pliers | Pliers | Pliers | Pliers | Pliers | - | - | - | - | - | - | Longnose pliers | Lead Pliers | Longnose pliers | Lead Pliers | Pliers | Pliers | Pliers | Pliers | - | - |
| Nipper Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 175 | 160 | - | 175 | 204 | 175 | 141 | 120 | 190 | 150 ～ 164 | - | 150 | 139 | 132 | 142 ～ 160 | 164 | 175 | 165 ～ 185 | 170 | 145 | 160 | - |
| Shaft/hole | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With or without Spring | Available | Available | - | Available | N/A | Available | - | N/A | N/A | N/A | - | N/A | Available | Available | N/A | N/A | Available | N/A | Available | Available | Available | - |
| Steel Wire Cutting Performance(φ/mm) | - | - | - | - | 3.2 | - | - | - | - | - | - | - | - | - | - | - | - | 1.6 ～ 1.8 | - | - | - | - |
| Copper Wire Cutting Performance(φ/mm) | - | 2.6 | - | - | - | - | - | - | 1.2 | - | - | - | 2 | - | 2 ～ 2.6 | - | - | - | - | - | 1.2 | - |
| Piano Wire Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Plastic Cutting Performance(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stranded Wire Cutting Ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Stainless steel cutting ability(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| VA (VVF) Wire Cutting Capacity(φ/mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| With/without tip claw replacement function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tip claw diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Ring Size(mm) | - | - | - | - | - | - | - | - | - | 3-4 ～ 5-9 | - | - | - | - | - | - | - | - | - | - | - | - |
| Parts Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Product Category
-
Plier Type
-
Plier Type
-
Nipper Type
- Nippers
- Heat Nippers
-
Overall Length(mm)
- 36
- 46
- 100
- 102.5
- 105
- 108
- 110
- 111.5
- 115
- 116
- 117
- 117.5
- 118
- 120
- 123
- 124
- 125
- 125.5
- 126
- 128
- 128.5
- 129
- 130
- 131
- 132
- 132.5
- 133
- 134
- 135
- 136
- 138
- 139
- 140
- 140|170|180|130
- 140|180
- 140|180|130|165
- 140|180|165
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- Approx. 152
- 152.5
- 153
- 154
- 155
- 157
- 158
- 158.5
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 170
- 170|180
- 171
- 172
- 174
- 175
- 178
- 179
- 180
- 180|250
- 181
- 183
- 185
- 186
- 188
- 189
- 190
- 192
- 193
- 194
- 195
- 197
- 199
- 200
- Approx. 200
- 201.5
- 202
- 203
- 204
- 205
- 206
- 208
- 210
- 214.5
- 215
- 217
- 219
- 220
- 222
- 223
- 223.5
- 224
- 225
- 227
- 228
- 229
- 230
- 232
- 235
- 240
- 242
- 245
- 250
- 260
- 266
- 270
- 275
- Approximately 275
- 280
- 282
- 285
- Approximately 285
- 287
- 290
- 293
- 297
- 300
- 305
- 310
- 320
- 340
- 370
- 400
- 443
- 455
- 460
- 465
- 560
- 570
- 580
- 585
- 590
- 595
- 600
- 620
- 920
-
Shaft/hole
- For Shaft
- For Hole
- Use with both shaft and hole
-
With or without Spring
-
Steel Wire Cutting Performance(φ/mm)
-
Copper Wire Cutting Performance(φ/mm)
-
Piano Wire Cutting Performance(φ/mm)
-
Plastic Cutting Performance(φ/mm)
-
Stranded Wire Cutting Ability(φ/mm)
-
Stainless steel cutting ability(φ/mm)
-
VA (VVF) Wire Cutting Capacity(φ/mm)
-
With/without tip claw replacement function
- Available
- N/A
-
Tip claw diameter(mm)
-
Compatible Ring Size(mm)
-
Parts Type
- Blade Tip
- Spring
- Grip
- Snap ring plier tip claw
Narrow search by specifying Brand
-
- KNIPEX (99)
- ESCO (69)
- WIHA (66)
- MUROMOTO TEKKO (64)
- FUJIYA (47)
- HOZAN (39)
- PHOENIX CONTACT (26)
- KTC(KYOTO TOOL) (23)
- ENGINEER (22)
- TRUSCO NAKAYAMA (21)
- MAEDAKINNZOKU (20)
- KEIBA (15)
- TSUNODA (14)
- LOBTEX (13)
- THREE PEAKS GIKEN (11)
- BAHCO (9)
- BERNSTEIN AG (9)
- SMATO (9)
- WEIDMUELLER (7)
- HANAZONO TOOL (6)
- IGARASHI PLIERS (5)
- E VALUE (4)
- LINDSTROM (4)
- MITOLOY (4)
- FACOM (4)
- ARC (3)
- GEDORE (3)
- CIMCO (3)
- HAZET (3)
- NWS (3)
- TRAD (3)
- M & M (2)
- NEPROS (2)
- RENNSTEIG (2)
- RITTAL (2)
- SIGNET (2)
- ARC GREATTOOL (1)
- WOLFCRAFT (1)
- GRIPONTOOLS (1)
- H & H (1)
- SK 11 (1)
- WELLER (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Pliers/Nippers/Pincers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.