hishiko Welding Rods

?* Information on days to ship and prices

• 

  Coated Arc Welding Rod for Cast Iron GRICAST1

  hishiko

  [Features]
  · GRICAST1 is an arc welding electrode for cast iron use that has a graphite-based coat and a pure Ni core wire, enabling stable welding to be done using a low current.
  · Welded parts harden very little to enable simple machining that is suitable for welding parts under water pressure.
  · Excellent weldability where blow holes, cracks and other welding defects are unlikely, as well as incredible X-ray performance and mechanical properties.
  · Welded metal expands and shrinks very little and has excellent crack resistance.
  · Welded metal is white in color.
  

  Starting from∗ ：	846.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Cast Iron GN-311

  hishiko

  [Features]
  · GN-311 is a coated arc welding electrode for cast iron use that uses graphite-based with a 36%Ni-Fe cladded core wire, and shows none of the rod scorching associated with general alloy core wires.
  · Featuring a composition that improves plating performance after welding by reducing Ni down to 40% or less.
  · Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
  · Welded metal has excellent crack resistance and mechanical properties.
  

  Starting from∗ ：	489.41 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MIG Welding Solid Wire for Cast Iron GN-100S

  hishiko

  [Features]
  · GN-100S is a pure nickel MIG welding solid wire that includes a suitable amount of Al and Ti.
  · For welding in various cast iron parts, since there is little hardening in the welding bonds, mechanical machining is easy.
  · Excellent weldability where blow holes, cracks and other welding defects are unlikely, as well as incredible X-ray performance and mechanical properties.
  · Welded metal expands and shrinks very little and has excellent crack resistance.
  · It is also outstanding in corrosion resistance against alkalis such as caustic soda.
  

  Starting from∗ ：	1,719.57 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MAG Welding Solid Wire for Cast Iron GN-55SN

  hishiko

  [Features]
  · GN-55SN is a MAG welding solid wire for cast iron with a chemical composition for the welded metal which is 57%Ni-special element-remainder made of Fe.
  · Welded metal has excellent mechanical properties and has high reliability for pressure-resistant and thick-walled parts, etc.
  · Also has excellent workability with little hardening of welded parts, simplifying welded machining operations. Weld defects are unlikely to occur and X-ray performance is excellent.
  · Excellent work efficiency, possible to obtain more than 3 times the efficiency of shielded metal arc welding.
  

  Starting from∗ ：	1,560.84 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MAG Welding Solid Wire for Cast Iron GN-311S

  hishiko

  [Features]
  · For GN-311S, keeping the Ni down to around 40%, this component will improve the plating properties after welding.
  · Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
  · Welded metal has excellent crack resistance and mechanical properties.
  

  Starting from∗ ：	1,415.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Pure Ni Type TIG Welding Rod for Cast Iron Welding GN-100T

  hishiko

  [Features]
  · GN-100T is a TIG welding rod used for welding pure Ni-based cast iron. Cold welding is possible, which results in favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
  · Workability is good, hardening of welds is less, and finishing work is easy.
  

  Starting from∗ ：	648.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Fe-Ni Type TIG Welding Rod for Cast Iron Welding GN-55T

  hishiko

  [Features]
  · GN-55T is a TIG welding rod used for welding cast iron with a chemical composition of 45%Fe-55%Ni, which allows cold welding to be performed, providing favorable physical properties for the deposited weld metal, with little expansion/contraction and exceptional crack resistance. Well suited to welding especially thick things and components requiring great strength.
  · Workability is good, hardening of welds is less, and finishing work is easy.
  

  Starting from∗ ：	595.24 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Fe-Ni Type TIG Welding Rod for Cast Iron GN-311T

  hishiko

  [Features]
  · GN-311T is a TIG welding rod with a chemical composition of 60%Fe-40%Ni used for welding cast iron.
  · Featuring a composition that improves plating performance after welding by reducing Ni down to 40% or less.
  · Welded metal is low Ni rather than typical Fe-Ni, so it is more suited to build up welding of cast iron which requires hardness and also enables surface treatment for materials such as hard Cr plating to be easily performed.
  · Welded metal has excellent crack resistance and mechanical properties.
  
  

  Starting from∗ ：	555.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308

  hishiko

  [Features]
  · This product enables outstanding weld workability by providing 19% Cr - 9% Ni austenitic structure weld metal that contains the appropriate amount of ferrite, a stable arc, minimal sputter and excellent slag removal.
  · It has low susceptibility to cracking and enables a weld metal with excellent mechanical properties to be obtained.
  · Because HS-308L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	100.65 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308L

  hishiko

  [Features]
  · This product enables outstanding weld workability by providing 19% Cr - 9% Ni austenitic structure weld metal that contains the appropriate amount of ferrite, a stable arc, minimal sputter and excellent slag removal.
  · It has low susceptibility to cracking and enables a weld metal with excellent mechanical properties to be obtained.
  · Because HS-308L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	92.47 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309

  hishiko

  [Features]
  · This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
  · Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
  · Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	96.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Shielded Metal Arc Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309L

  hishiko

  [Features]
  · This product provides weld metal that has outstanding mechanical properties, with a 25% Cr - 12% Ni austenitic structure that contains the appropriate amount of ferrite and low cracking susceptibility. Provides excellent welding workability thanks to its stable arc, as well as reduced spatter production and slug removability, etc.
  · Contains a large amount of chromium and nickel, which gives it excellent heat and corrosion resistance properties, enabling it to demonstrate stable structure even when diluted with different metal matrix composites such as carbon steel, etc.
  · Because HS-309L has low carbon content, it features excellent heat and corrosion resistance, and deposits less chromium carbide, offering excellent grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	104.01 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  MIG Welding Wire for Stainless Steel KSW-308L

  hishiko

  [Applications]
  · Welding of L/C-19%Cr-9%NiSUS304, 304L.
  

  Starting from∗ ：	308.71 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  MIG Welding Wire for Stainless Steel KSW-309

  hishiko

  [Applications]
  · Welding of 22%Cr-12%NiSUS309S, heat resistant cast steel, and SUS304 clad steel. Used for welding dissimilar metals such as mild steel, low-alloy steel, etc., with SUS304.
  

  Starting from∗ ：	356.79 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Gas-Shielded Solid Arc Welding Wire for Austenite + Ferritic Stainless Steel GRINOX29S

  hishiko

  [Features]
  · GRINOX29S is an austenitic and ferritic gas shielded solid welding wire, and since its composition is designed to reduce shrinkage stress during cooling, it is particularly ideal for adhesion of highly crack-sensitive materials such as alloy steel, etc., as well as underlaying of hardening materials in build-up welding.
  · It has machining hardening property, excellent impact resistance, high Cr and excellent heat and corrosion resistance.
  

  Starting from∗ ：	806.87 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308T

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
  · Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	95.85 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-18% / Ni-8% Stainless Steel HS-308LT

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 19%Cr-9%Ni. Most generally used for stainless steel structures.
  · Features excellent crack resistance, heat and corrosion resistance, and mechanical characteristics. Because HS-308LT has low carbon content, it provides good grain boundary corrosion resistance even if the welding is left as is.
  

  • Volume Discount

  Starting from∗ ：	110.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309T

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
  · Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
  · Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.
  

  Starting from∗ ：	122.29 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  TIG Welding Rod for Cr-22% / Ni-12% Stainless Steel HS-309LT

  hishiko

  [Features]
  · A TIG welding bar made of austenitic+ferritic stainless steel, composed of 24%Cr-13%Ni.
  · Contains a high volume of Cr and Ni, so it is suitable for welding dissimilar materials with carbon steel / low-alloy steel and stainless steel, etc.
  · Because HS-309LT has low carbon content, it is also suitable for underlaying during build-up welding of low carbon stainless steel.
  

  Starting from∗ ：	134.32 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-30CR

  hishiko

  [Features]
  · Since high Cr cast iron based welding bar generates high hardness Cr carbide, it is suitable for erosion wear resistance.
  · Aside from wear resistance, it is also excellent in heat resistance and corrosion resistance.
  · An easy arc start for excellent welding workability.
  

  Starting from∗ ：	220.87 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Coated Arc Welding Rod for Soil/Sand Wear-Resistance KF-25CR-3

  hishiko

  [Features]
  · High Cr cast iron based welding bar generates Cr carbide and also Nb, Mo, W, V carbides, to show an extremely high hardness and superior wear resistance in regards to erosion and scratch wear.
  · There are almost no drops in hardness, even in temperatures as high as 600°C. It also boasts excellent corrosion resistance, making it suitable for wear-resistance applications in high temperatures and in corrosive environments.
  

  Starting from∗ ：	661.37 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

Loading...