KOHARA GEAR INDUSTRY Bevel Gears
Narrow search by specifying Shape
?* Information on days to ship and prices
-
Finished Miter
KOHARA GEAR INDUSTRY
S45C made, induction hardened tooth surface, tooth hardness HRC50 to 60, precision JISB1704 grade 4 finished miter. Reasonably priced, finished miter with slotted keyway, and tapping.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.73 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Molded Bevel Gear
KOHARA GEAR INDUSTRY
Duracon® material (M90-44), precision JISB1704 grade 6 molded bevel gear. Low-cost injection molded gear with sizes M0.5 to 1. Oil-less bush is also available when using it with a diameter smaller than the inner diameter.
Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 4.22 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bevel Gear
KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 high precision miter.
Excellent quietness due to SM crowning method, achieving low cost miter.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 14.05 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ground Tooth Spiral Miter MMSG
KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, tooth surface hardness HRC55 to 60. Precision JISB1704 grade 1 ground tooth spiral miter.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 106.01 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Miter
KOHARA GEAR INDUSTRY
SUS303 made, precision JISB1704 grade 3 high-precision stainless steel miter. Miter aimed at cost reduction, and quiet due to coniflex teeth form. Use in rust intolerant locations.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 25.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Finished Stainless Steel Miter
KOHARA GEAR INDUSTRY
SUS303 made, precision JISB1704 grade 3, finished stainless steel miter. Quiet due to coniflex tooth form, and possible to install immediately after purchasing with finished shaft hole with slotted keyway and tapping.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 31.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Miter SM
KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 high precision miter.
Excellent quietness due to SM crowning method, achieving low cost miter.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 14.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Finished Spiral Bevel Gear
KOHARA GEAR INDUSTRY
SCM415 made, induction hardened entire surface, precision JISB1704 grade 4 finished ground spiral bevel gear. After purchasing the shaft hole finished type, immediate installation of this high-strength spiral bevel gear is possible. F shape can be added to suit the mounting flange.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 67.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plastic Bevel Gear
KOHARA GEAR INDUSTRY
MC901 made, precision JISB1704 grade 4 plastic bevel gear. High performance plastic bevel gear with excellent quietness due to coniflex teeth form, and can be used without lubrication.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 17.99 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Angular Miter
KOHARA GEAR INDUSTRY
Normal miter is set with an axis angle of 90°, but an axis angle set arbitrarily is called angular miter. SAM The angular miter is a standardized product with axis angles of 45°, 60°, and 120°.
[Features]
· Normal miter is set with an axis angle of 90°, but an axis angle set arbitrarily is called angular miter.
· SAM The angular miter is a standardized product with axis angles of 45°, 60°, and 120°.
· Use the same model number for pairing.
· Other axis angles can also be produced as a custom order, but please note that there may be cases where manufacturing is not possible, due to limitations of the machine.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 19.29 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Finished Spiral Miter
KOHARA GEAR INDUSTRY
SCM415 made, whole surface carburized and quenched, hardened tooth surface HRC55 to 60, precision JISB1704 grade 4 finished spiral miter.
Shaft hole finished type, for immediate installation on purchase of this high-strength spiral bevel gear. F shape can be added to suit the mounting flange.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 32.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Plastic Miter
KOHARA GEAR INDUSTRY
MC901 made, precision JISB1704 grade 4 plastic miter. High performance plastic gear with excellent quietness due to coniflex teeth form, and can be used without lubrication. As material expands and contracts depending on temperature and humidity, set proper backlash to use.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 13.93 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Bevel Gear
KOHARA GEAR INDUSTRY
S45C made, induction hardened tooth surface, precision JISB1704 grade 4 ground spiral bevel gear. Parts other than the teeth section can be additionally machined, such as shaft hole. Spiral bevel gear. Select the combination according to the speed ratio, using care in the thrust direction.- Volume Discount
- Stock
- 2D / 3D CAD data available
Starting from∗ ： 25.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 31.03 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Molded Miter
KOHARA GEAR INDUSTRY
Duracon® material (M90-44), precision JISB1704 grade 6 molded miter.
Low-cost injection molded with sizes M0.5 to 1.5.
Oil-less bush is also available when using it with a diameter smaller than the inner diameter.
Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 3.73 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Spiral Miter MMS
KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, precision JISB1704 grade 4 spiral miter. Since parts other than the teeth are subjected to a carburizing treatment, additional work such as shaft hole machining can be carried out.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 47.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Bevel Gear with Shaft
KOHARA GEAR INDUSTRY
S45C made, precision JISB1704 grade 3 bevel gear with shaft. Pinion gear has been subjected to thermal refining to increase toughness, and a reduction ratio of 1/5 is achievable in one-step. The shaft part can be machined to any shape.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 31.58 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ground Tooth Spiral Miter SMSG
KOHARA GEAR INDUSTRY
S45C made, with teeth grinding processing after induction hardening of teeth surface, precision JISB1704 grade 2 ground spiral miter. Parts other than teeth section can be additionally machined. The industry's first m1 size standardized, high-precision, high-strength, high-speed rotation oriented ground bevel gear.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 89.01 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
High Ratio Hypoid Gear
KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, precision JISB1704 grade 3 spiral miter. A high reduction ratio of 1/15 to 1/200 on the linear axis can be achieved in one step. Since parts other than the teeth are subjected to a carburizing treatment, additional work such as bore hole and shaft part machining can be carried out.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 70.45 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ground Tooth Spiral Bevel Gear SBSG
KOHARA GEAR INDUSTRY
S45C made, induction hardened tooth surface, precision JISB1704 grade 2 ground spiral bevel gear. Parts other than teeth section can be additionally machined. Ground spiral bevel gear demonstrating quietness at high speed, with high precision.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 82.17 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Spiral Miter SMS
KOHARA GEAR INDUSTRY
Material: S45C, quenched tooth surface part, precision JISB1704 grade 4 spiral miter. Reasonably priced spiral miter, with parts other than the teeth section that can be additionally machined, such as shaft hole.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 21.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Miter mm
KOHARA GEAR INDUSTRY
SCM415 made, carburized and quenched tooth part, precision JISB1704 grade 4 miter. Since parts other than the teeth are subjected to a carburizing treatment, additional work such as hole, keyway slotting and tap machining can be carried out.- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 43.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ground Tooth Spiral Bevel Gear MBSG
KOHARA GEAR INDUSTRY
SCM415 made, induction hardened tooth part, precision JISB1704 grade 1 ground spiral bevel gear. Since parts other than the teeth are subjected to a carburizing treatment, additional machining can be carried out. High-precision, high-strength, high-speed rotation ground spiral bevel gear. Attention to thrust direction should be given when using.- 2D / 3D CAD data available
Starting from∗ ： 103.09 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Nissay Ground Tooth Spiral Bevel Gear
KOHARA GEAR INDUSTRY
Precision JISB1704 grade 0 ground tooth spiral bevel gear. Carburized and quenched GF finished type with slotted keyway, and a GU type with a bottom hole available. High precision, high strength, high speed rotation.Starting from∗ ： 409.33 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Sintered Miter
KOHARA GEAR INDUSTRY
SMF5040 made, high precision sintered gear, porous and retains lubricity. Saves machining and reduces costs, JISB 1704, grade 5 high precision bevel gear.- 2D / 3D CAD data available
Starting from∗ ： 5.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Nissay Ground Spiral Miter
KOHARA GEAR INDUSTRY
Precision JISB1704 grade 0 ground tooth spiral miter. Carburized and quenched GF finished type with slotted keyway, and a GU type with a bottom hole available. Select according to the intended use. High-precision, high-strength, high-speed rotation ground spiral bevel gear.- 2D CAD data available
Starting from∗ ： 351.86 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Module |
| Shape |
| Number of Teeth(Teeth) |
| Reduction Ratio |
| Material |
| Heat Treatment |
| Ground Tooth |
| Shaft Bore Config. |
| Tooth Width B(mm) |
| Surface Treatment |
| Shaft Bore Dia. d(Ø) |
| Precision(* New JIS) |
| Shaft Bore Tolerance |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY | KOHARA GEAR INDUSTRY |
| Product Series | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 17.73 € *Unit price with basic configuration Volume Discount | 4.22 € *Unit price with basic configuration Volume Discount | 14.05 € *Unit price with basic configuration Volume Discount | 106.01 € *Unit price with basic configuration Volume Discount | 25.86 € *Unit price with basic configuration Volume Discount | 31.98 € *Unit price with basic configuration Volume Discount | 14.11 € *Unit price with basic configuration Volume Discount | 67.71 € *Unit price with basic configuration Volume Discount | 17.99 € *Unit price with basic configuration Volume Discount | 19.29 € *Unit price with basic configuration Volume Discount | 32.59 € *Unit price with basic configuration Volume Discount | 13.93 € *Unit price with basic configuration Volume Discount | 25.13 € *Unit price with basic configuration Volume Discount | 31.03 € *Unit price with basic configuration Volume Discount | 3.73 € *Unit price with basic configuration Volume Discount | 47.23 € *Unit price with basic configuration Volume Discount | 31.58 € *Unit price with basic configuration Volume Discount | 89.01 € *Unit price with basic configuration Volume Discount | 70.45 € *Unit price with basic configuration Volume Discount | 82.17 € *Unit price with basic configuration Volume Discount | 21.38 € *Unit price with basic configuration Volume Discount | 43.11 € *Unit price with basic configuration Volume Discount | 103.09 € *Unit price with basic configuration | 409.33 € *Unit price with basic configuration | 5.43 € *Unit price with basic configuration | 351.86 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | Same day | Same day | Same day | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | Same day | Same day | Same day | 7 Days | Same day | Same day | 7 Days | 7 Days | 6 Days | 7 Days |
| Specifications |
|
| ||||||||||||||||||||||||
| Module | 1 ～ 5 | 0.5 ～ 1 | 1 ～ 8 | 2 ～ 4 | 1 ～ 4 | 1 ～ 4 | 1 ～ 8 | 2 ～ 6 | 1 ～ 3 | 1.5 ～ 3 | 1 ～ 10 | 1 ～ 4 | 1 ～ 5 | 1.5 ～ 3 | 0.5 ～ 1.5 | 2 ～ 5 | 1.5 ～ 3 | 1 ～ 5 | 1 ～ 1.5 | 2 ～ 4 | 1 ～ 8 | 2 ～ 5 | 2 ～ 4 | 2 ～ 3.5 | 0.8 ～ 1.5 | 1.5 ～ 6 |
| Shape | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Straight Bevel Gears | Miter Gears | Spiral Miter Gears | Hypoid Gears | Spiral Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears | Spiral Bevel Gears | Spiral Bevel Gears | Miter Gears | Spiral Miter Gears | Miter Gears | Spiral Miter Gears |
| Number of Teeth(Teeth) | 20 ～ 30 | 20 ～ 40 | 15 ～ 60 | 20 ～ 30 | 20 ～ 25 | 20 ～ 25 | 16 ～ 30 | 15 ～ 45 | 15 ～ 45 | 20 | 20 | 20 ～ 25 | 15 ～ 60 | 15 ～ 45 | 20 | 20 ～ 30 | 12 ～ 60 | 20 ～ 30 | 1 ～ 60 | 15 ～ 45 | 20 ～ 30 | 20 ～ 30 | 20 ～ 40 | 15 ～ 34 | 20 | 20 ～ 30 |
| Reduction Ratio | 1 | 2 | 1.5 ～ 4 | 1 | 1 | 1 | 1 | 1.5 ～ 3 | 1.5 ～ 3 | 1 | 1 | 1 | 1.5 ～ 4 | 1.5 ～ 3 | 1 | 1 | 5 | 1 | 15 ～ 60 | 1.5 ～ 3 | 1 | 1 | 2 | 1.5 ～ 2 | 1 | 1 |
| Material | General Steel Material | Resin | General Steel Material | General Steel Material | Stainless Steel | Stainless Steel | General Steel Material | General Steel Material | Resin | General Steel Material | General Steel Material | Resin | General Steel Material | Stainless Steel | Resin | General Steel Material | General Steel Material | General Steel Material | General Steel Material | General Steel Material | General Steel Material | General Steel Material | General Steel Material | General Steel Material | Cast Products | General Steel Material |
| Heat Treatment | High Frequency | Not Provided | Not Provided | Carburizing | Not Provided | Not Provided | Not Provided | Carburizing | Not Provided | Not Provided | Carburizing | Not Provided | High Frequency | Not Provided | Not Provided | Carburizing | Not Provided | High Frequency | Carburizing | High Frequency | High Frequency | Carburizing | Carburizing | Carburizing | Not Provided | Carburizing |
| Ground Tooth | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Provided | Not Provided | Provided | Not Provided | Not Provided | Provided | Provided | Not Provided | Provided |
| Shaft Bore Config. | Round hole+tap / Keyway + Tap | Round Hole | Round Hole | Round Hole / Keyway + Tap | Round Hole | Round hole+tap / Keyway + Tap | Round Hole | Round hole+tap / Keyway + Tap | Round Hole | Round Hole | Round hole+tap / Keyway + Tap | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole / Round hole+tap / Keyway + Tap | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole | Round Hole |
| Tooth Width B(mm) | 5 ～ 30 | 2.5 ～ 4.5 | 6 ～ 50 | 9 ～ 25 | 5 ～ 25 | 5 ～ 25 | 5 ～ 35 | 11 ～ 42 | 6 ～ 23 | 5 ～ 22 | 4.5 ～ 45 | 5 ～ 20 | 6 ～ 35 | 9 ～ 23 | 2.5 ～ 7 | 9 ～ 30 | 12 ～ 22 | 5 ～ 30 | 6 ～ 10 | 11 ～ 28 | 5 ～ 35 | 9 ～ 30 | 14 ～ 27 | 9 ～ 22 | 4.24 ～ 8.48 | 7 ～ 38 |
| Surface Treatment | Black Oxide | Not Provided | Black Oxide | Not Provided | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Not Provided | Not Provided | Black Oxide | Black Oxide | Black Oxide | Not Provided | Black Oxide | Black Oxide | Black Oxide | Not Provided | Not Provided | Not Provided | Not Provided |
| Shaft Bore Dia. d(Ø) | 8 ～ 55 | 3 ～ 6 | 6 ～ 35 | 12 ～ 50 | 6 ～ 28 | 6 ～ 30 | 6 ～ 30 | 10 ～ 110 | 6 ～ 20 | 8 ～ 16 | 8 ～ 100 | 6 ～ 20 | 6 ～ 30 | 8 ～ 20 | 3 ～ 8 | 12 ～ 28 | 12 ～ 25.25 | 6 ～ 50 | 12 ～ 36.1 | 10 ～ 20 | 6 ～ 30 | 12 ～ 28 | 12 ～ 25 | 10 ～ 26 | 4 ～ 6 | 10 ～ 40 |
| Precision(* New JIS) | Grade 4 | Grade 6 | Class 3 | Class 1 | Class 3 | Class 3 | Class 3 | Grade 4 | Grade 4 | Class 3 | Grade 4 | Grade 4 | Grade 4 | Class 3 | Grade 6 | Grade 4 | Class 3 | Class 2 | Class 3 | Class 2 | Grade 4 | Grade 4 | Class 1 | Grade 0 | Class 5 | Grade 0 |
| Shaft Bore Tolerance | H7 | Not Specified | H7 | H7 | H7 | H7 | H7 | H7 | - | H7 | H7 | Not Specified | Not Specified | H7 | Not Specified | H7 | H7 | H7 | H7 | H7 | Not Specified | H7 | H7 | H7 | H8 | H7 |
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Module
-
Number of Teeth(Teeth)
-
Reduction Ratio
-
Material
- General Steel Material
- Stainless Steel
- Aluminum
- Brass
- Resin
- Cast Products
-
Heat Treatment
- Not Provided
- High Frequency
- Carburizing
- Normalized
-
Ground Tooth
- Not Provided
- Provided
-
Shaft Bore Config.
-
Tooth Width B(mm)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
-
Shaft Bore Dia. d(Ø)
-
Precision(* New JIS)
-
Shaft Bore Tolerance
Narrow search by specifying Brand
-
- MISUMI (1)
- KOHARA GEAR INDUSTRY (26)
- NORELEM (15)
- KYOUIKU GEAR MFG（KG） (13)
- AOKI SEIMITSU KOGYO (8)
- ABP ANTRIEBSTECHNIK (1)
- GANTER (1)
- KATAYAMA CHAIN (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Narrow search by specifying lead time
-
- All
- Same day
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
Examples how you can use these components Test
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.