KOBE STEEL Welding Rods（Product Type：Welding wire）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
MIG/TIG Material for Aluminum / Aluminum Alloy, Welding Wire A-5356WY【1-5 Pieces Per Package】
KOBE STEEL
Standard Al-Mg based material with 5.0% Mg. This is the most widely used welding material which features good welding characteristics and enhances the properties of the appliance by the addition of Ti.Starting from∗ ： 103.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Mug Material/Welding Wire for Stainless Steel DW-308
KOBE STEEL
[Features]
· Used for welding of 18%Cr-8%Ni steel (SUS304, etc.). An adequate amount of ferrite in the structure provides low cracking susceptibility and excellent weldability. Able to achieve weld metal with excellent corrosion resistance and mechanical properties. Suitable for flat welding, fillet welding, etc.Starting from∗ ： 202.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mug Material/Welding Wire for Stainless Steel DW-309
KOBE STEEL
Dissimilar material welding involving stainless steel and other types of steel. Underlay welding of stainless clad steel. Welding underlay for overlaying 308-type weld metal etc. A relatively large amount of ferrite is contained in the structure for excellent weldability. Contains a large amount of alloy metal so it is excellent for welding parts that are to be diluted.Starting from∗ ： 446.43 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Welding Wire (High-Tensile Steel) MG-60
KOBE STEEL
For butt-jointing or fillet welding of steel frames, bridge building, construction machinery, general machinery, and pressure vessels, etc. Arc is stable over a wide current range for good workability. Suitable for downward, horizontal and lateral welding at high currents. Excellent crack resistance and good impact property.Starting from∗ ： 239.74 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Welding Wire/Solid Wire (Mild Steel to 550 MPa Class Steel) SE-50T
KOBE STEEL
SE wire (no copper plating). Suitable for thin plate welding and all positions, boasting excellent arc stability in low to medium current regions.Starting from∗ ： 129.88 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Hard Cladding MAG Material / Welding Wire DW-H700
KOBE STEEL
Suitable for anti earth and sand abrasion. Contains Mo, V, and W, with negligible reductions in hardness even after heat treatment, enabling it to remain stable.Starting from∗ ： 347.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Hard Cladding MAG Material / Welding Wire DW-H800
KOBE STEEL
Suitable for severe wear from dirt and sand. It is brittle, so only use it for parts that are not subject to large impacts. Not suitable for excessive multi-layering.Starting from∗ ： 389.58 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel MG-50T
KOBE STEEL
Excellent arc stability at a low current range, suitable for overlap, fillet and butt-joint short arc welding. Extremely versatile, able to be used for welding of thin plates and all position welding. Can also be used with Ar + CO2 gas.Starting from∗ ： 115.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel SE-A50
KOBE STEEL
SE wire (no copper plating). Suitable for thin to medium welding and all position welding, boasting excellent arc stability in low to medium current regions.Starting from∗ ： 157.51 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z100S
KOBE STEEL
Suitable for protruding and fillet welding (downward and lateral). Wire focused on middle plates (approximately 7 - 16 mm), combining the low slag of solid wire with the arc stability of DW wire.Starting from∗ ： 176.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-Z100
KOBE STEEL
Lime-titania welding rod with excellent welding workability, X-ray performance and mechanical properties. Excellent workability in all positions, and since coating agent contains large amounts of iron powder, welding speed is quick and re-arc performance is also excellent to enhance work efficiency.Starting from∗ ： 185.49 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-100/MX-Z100
KOBE STEEL
Suitable for protruding and fillet welding (downward and lateral). Capable of high-efficiency welding construction. Slag volume is about the same as that of solid wire.Starting from∗ ： 171.26 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-316L
KOBE STEEL
Welded low carbon 18% Cr-12% Mo steel (SUS316L, etc.). An adequate amount of ferrite in the structure provides low cracking susceptibility and excellent workability. Excellent corrosion resistance in diluted sulfuric acid.Starting from∗ ： 440.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z200
KOBE STEEL
Suitable for protruding and fillet welding (downward and lateral). Wire focused on middle plates (approximately 7 - 16 mm), combining the low slag of solid wire with the arc stability of DW wire.Starting from∗ ： 179.73 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z210
KOBE STEEL
Suitable for protruding and fillet welding (downward and lateral). Wire focused on middle plates (approximately 7 - 16 mm), combining the low slag of solid wire with the arc stability of DW wire.Starting from∗ ： 181.65 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-Z110
KOBE STEEL
Lime-titania welding rod with excellent welding workability, X-ray performance and mechanical properties. Excellent workability in all positions, and since coating agent contains large amounts of iron powder, welding speed is quick and re-arc performance is also excellent to enhance work efficiency.Starting from∗ ： 170.01 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-100Z
KOBE STEEL
Suitable for protruding and fillet welding (downward and lateral). Capable of high-efficiency welding construction. Slag volume is about the same as that of solid wire.Starting from∗ ： 179.73 € Min. Shipping Days ： 15 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Type |
| Pole diameter(mm) |
| Wire Diameter(mm) |
| Pole length(mm) |
| Current range, lower(A) |
| Current range, vertical position, elevating, upper |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL | KOBE STEEL |
| Product Series | MIG/TIG Material for Aluminum / Aluminum Alloy, Welding Wire A-5356WY【1-5 Pieces Per Package】 | Welding Wire/Solid Wire (Mild Steel to 550 MPa Class Steel) SE-50T | MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel MG-50T | MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel SE-A50 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z100S | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-Z100 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-100/MX-Z100 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-316L | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z200 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-Z210 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel DW-Z110 | MAG Material / Flux-Cored Wire for Soft Steel to 550 MPa Grade Steel MX-100Z | |||||
| Starting from∗ | 103.71 € *Unit price with basic configuration | 202.89 € *Unit price with basic configuration | 446.43 € *Unit price with basic configuration | 239.74 € *Unit price with basic configuration | 129.88 € *Unit price with basic configuration | 347.26 € *Unit price with basic configuration | 389.58 € *Unit price with basic configuration | 115.16 € *Unit price with basic configuration | 157.51 € *Unit price with basic configuration | 176.26 € *Unit price with basic configuration | 185.49 € *Unit price with basic configuration | 171.26 € *Unit price with basic configuration | 440.66 € *Unit price with basic configuration | 179.73 € *Unit price with basic configuration | 181.65 € *Unit price with basic configuration | 170.01 € *Unit price with basic configuration | 179.73 € *Unit price with basic configuration |
| Min. Shipping Days ： | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 6 Days | 8 Days | 8 Days | 8 Days | 8 Days | 7 Days | 8 Days | 8 Days | 7 Days | 15 Days |
| Product Type | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire | Welding wire |
| Pole diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wire Diameter(mm) | 0.8 ～ 1.6 | 0.9 ～ 1.2 | 1.2 | 1.2 ～ 1.6 | 0.9 ～ 1.2 | 1.2 | 1.2 ～ 1.6 | 0.9 ～ 1.2 | 0.9 ～ 1.2 | 1.2 | 1.2 ～ 1.6 | 1.2 ～ 1.6 | 1.2 | 1.2 ～ 1.6 | 1.2 | 1.2 ～ 1.6 | 1.2 |
| Pole length(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Current range, lower(A) | - | - | - | 100～350 ～ 200～550 | 50~200 ～ 80～280 | - | - | - | 50～220 ～ 80～300 | - | 120~300 ～ 200~400 | 200～350 ～ 300~500 | - | 150～300 ～ 200 to 450 | 150～350 | 120~300 ～ 180~400 | - |
| Current range, vertical position, elevating, upper | - | - | - | 100~180 ～ - | 50～140/50～120 ～ 50～180/50～140 | - | - | - | 50～150/50～150 ～ 50～180/50～180 | - | - | - | - | - | - | 120～220 ～ 180～240 | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Type
- Welding rod
- Welding wire
-
Pole diameter(mm)
-
Wire Diameter(mm)
-
Pole length(mm)
-
Current range, lower(A)
- 10–30
- 15–40
- 30–60
- 35~60
- 40~50
- 45–65
- 50～80
- 50~85
- 50~90
- 50~100
- 50～120
- 50–150
- 50~200
- 50～220
- 50~250
- 55～80
- 55~85
- 55～90
- 60–100
- 70~100
- 70～110
- 70～120
- 70~140
- 70～200
- 70～250
- 80–120
- 80～130
- 80~150
- 80～200
- 80～280
- 80～300
- 80～350
- 85～140
- 90~130
- 90~140
- 100–140
- 100~150
- 100~160
- 100–200
- 100–250
- 100～350
- 110～150
- 120～130
- 120～180
- 120～190
- 120~300
- 120 to 350
- 130～180
- 130~190
- 140 to 180
- 140~190
- 140~200
- 150~200
- 150~250
- 150～300
- 150～350
- 150～470
- 160～350
- 170~250
- 170～400
- 180–200
- 180～240
- 180～260
- 180～350
- 180~400
- 190~240
- 190～250
- 200～350
- 200~400
- 200 to 450
- 200～550
- 220–240
- 250～450
- 300~500
-
Current range, vertical position, elevating, upper
- 10–30
- 10~35
- 25～55
- 30~50
- 35~60
- 40–60
- 40–70
- 45 to 75
- 45～80
- 50–70
- 50～80
- 50~90
- 50～90/50～90
- 50～120・50～100
- 50～140・50～100
- 50～140/50～120
- 50～150/50～150
- 50～160・50～120
- 50～160/50～160
- 50～180/50～140
- 50～180/50～180
- 60~80
- 60~110
- 60~120
- 60～130/60～130
- 65～105
- 65～110
- 70～140/70～100
- 70～160/70～120
- 80–120
- 80～130
- 80～130/80～130
- 80～180/80～150
- 80～180・80～150
- 85～135
- 90~130
- 90～150/90～150
- 100~150
- 100~160
- 100～170/100～170
- 100~180
- 110~140
- 110~170
- 120～170
- 120～180
- 120～220
- 120～260/120～260
- 130～170/130～170
- 130～200
- 135～210
- 140～210
- 150~200
- 150～230
- 180～240
- -
Narrow search by specifying Brand
-
- KOBE STEEL (17)
- STAR ELECTRIC MANUFACTURING (12)
- hishiko (7)
- NIPPON WELDING ROD (7)
- TASETO (6)
- NITTETSUSUMIKIN (4)
- DAIDO STEEL (2)
- PANASONIC WELDING SYSTEMS (2)
- NIKKEI SANGYO (1)
- STEINEL (0)
- TRUSCO NAKAYAMA (0)
- H & H (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Welding Rods
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.