MISUMI Carbide Ball End Mills（Machining Application：Curved surface）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
MISUMI
Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!- Volume Discount
- DIA
- Graphite
- 2 Flutes
Starting from∗ ： 87.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide ball end mill, 2-flute / short model
MISUMI
XAL Series is the definitive choice for cost-sensitive customers- Volume Discount
- XAL
- General Steel
- 2 Flutes
Starting from∗ ： 14.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, 3-flute / short model
MISUMI
[Features]
-The 3-edge shape is resistant to chattering and enables high feed rate
-The surface of the workpiece is very well finished after machining.
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
MISUMI
[Features]
The shape with 3 flutes and short flute length prevents chatter and enables high feed machining
The tapered neck effectively suppresses chatter
Machining of high hardness steel up to 65HRC is possible
The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Starting from∗ ： 74.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
MISUMI
A type for aluminum that achieves high efficiency while having the affordable uncoated design- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute
MISUMI
Diamond coated products that exert tremendous durability are available in the industry's lowest price- Volume Discount
- DIA
- Graphite
- 2 Flutes
- L (Long)
Starting from∗ ： 106.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill (R accuracy ±3μm)
MISUMI
[Features]
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation
-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 48.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
MISUMI
[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder
-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds
-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Starting from∗ ： 66.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
MISUMI
[Features]
-Compatible with shrink fit chucks for high precision machining
-Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Starting from∗ ： 25.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide ball end mill, 2-flute / short model
MISUMI
[Features]
All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling
-For rough machining of workpieces that are expected to have a good surface finish after machining
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 22.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
-Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation
-For rough machining of the workpiece, a good surface finish can be expected after machining.
-Long shank type, ideal for deep cavity milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- General Steel
- 2 Flutes
Starting from∗ ： 43.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide ball end mill, short model
MISUMI
[Features]
-Good surface finish can be expected for the rough surface of the workpiece after machining
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, regular model
MISUMI
[Features]
-Regular bridge length allows for many regrinding times
-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 2-flute / short, long shank model
MISUMI
[Features]
-Long shank, ideal for deep cavity milling
It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
MISUMI
A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 3-flute / regular model
MISUMI
[Features]
-The 3-edge shape is chatter resistant and enables high feed
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, short model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide ball end mill, 4-flute / regular model
MISUMI
[Features]
-The surface of the workpiece is very good after machining.
-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.
-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide ball end mill, 2-flute / short model
MISUMI
Highly versatile due to the non-coated specification- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
MISUMI
[Features]
-High rigidity, 2 flute type with longitudinal taper
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Starting from∗ ： 33.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
MISUMI
[Features]
-High feed, high rigidity 3-spiral taper shape with taper length
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck ball end mill, 2-flute / long neck model
MISUMI
[Features]
-Long neck shape suitable for deep cavity milling
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck ball end mill, 3-flute / long neck model
MISUMI
[Features]
-Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas
-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck ball end mill, 4-flute / long neck model
MISUMI
[Features]
-Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Min. Shipping Days ： 5 Days -
TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
MISUMI
[Features]
-Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).
-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling
-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
Starting from∗ ： 108.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
MISUMI
The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel- Volume Discount
- TS
- High-Hardness Steel
- 2 Flutes
- B (Stub)
Starting from∗ ： 66.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
MISUMI
Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS- Volume Discount
- TS
- SUS
- 2 Flutes
- S (Short)
Starting from∗ ： 99.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
MISUMI
The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model
MISUMI
Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity- Volume Discount
- CrN
- Copper
- 2 Flutes
- S (Short)
Starting from∗ ： 33.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model
MISUMI
CrN coated products that are ideal for copper electrode processing are available at affordable prices- Volume Discount
- CrN
- Copper
- 2 Flutes
Starting from∗ ： 33.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model
MISUMI
4-flute ball for graphite that achieves high feed- Volume Discount
- DIA
- Graphite
- 4 Flutes
- S (Short)
Starting from∗ ： 99.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model
MISUMI
The price of the non-coated product with excellent cost performance has been further reduced- Volume Discount
- Non-Coated
- Graphite
- 2 Flutes
- L (Long)
Starting from∗ ： 80.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model
MISUMI
Sharp edge that's suitable for machining resin- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- S (Short)
Starting from∗ ： 31.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
MISUMI
A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper- Volume Discount
- XAL
- General Steel
- 2 Flutes
Starting from∗ ： 17.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CBN Ball End Mill, 2-Flute
MISUMI
CBN ball end mill that's ideal for precision finishing is available at a value price- Volume Discount
- High-Hardness Steel
- 2 Flutes
Starting from∗ ： 133.02 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
MISUMI
High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 19.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
MISUMI
The user friendly regular flute length type is released simultaneously- Volume Discount
- MR
- General Steel
- 2 Flutes
- R (Regular)
Starting from∗ ： 22.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
MISUMI
High-performance MRC series is available in the industry's largest number of sizes- Volume Discount
- MR
- General Steel
- 2 Flutes
- S (Short)
Starting from∗ ： 20.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Ball End Mill, 2-Flute / Regular Model
MISUMI
The regular flute length type is introduced in the low-price and popular XAL balls- Volume Discount
- XAL
- General Steel
- 2 Flutes
Starting from∗ ： 16.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| R Size(mm) |
| Type |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| R Precision(μm) |
| Machining Application |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model | Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model | Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute | TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model | TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model | XAC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, 2-flute / short, long shank model | TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model | TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model | TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model | TSC series carbide long neck ball end mill, 2-flute / long neck model | TSC series carbide long neck ball end mill, 3-flute / long neck model | TSC series carbide long neck ball end mill, 4-flute / long neck model | TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model | DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model | CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model | Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model | Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model | Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model | XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model | MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model | ||||||||||||||||
| Starting from∗ | 87.71 € *Unit price with basic configuration Volume Discount | 14.53 € *Unit price with basic configuration Volume Discount | - Volume Discount | 74.53 € *Unit price with basic configuration Volume Discount | - Volume Discount | 106.79 € *Unit price with basic configuration Volume Discount | 48.69 € *Unit price with basic configuration Volume Discount | 66.91 € *Unit price with basic configuration Volume Discount | 25.08 € *Unit price with basic configuration Volume Discount | 22.45 € *Unit price with basic configuration Volume Discount | 43.83 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 33.49 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 108.89 € *Unit price with basic configuration Volume Discount | 66.98 € *Unit price with basic configuration Volume Discount | 99.51 € *Unit price with basic configuration Volume Discount | - Volume Discount | 33.74 € *Unit price with basic configuration Volume Discount | 33.74 € *Unit price with basic configuration Volume Discount | 99.52 € *Unit price with basic configuration Volume Discount | 80.28 € *Unit price with basic configuration Volume Discount | 31.53 € *Unit price with basic configuration Volume Discount | 17.09 € *Unit price with basic configuration Volume Discount | 133.02 € *Unit price with basic configuration Volume Discount | 19.40 € *Unit price with basic configuration Volume Discount | 22.98 € *Unit price with basic configuration Volume Discount | 20.69 € *Unit price with basic configuration Volume Discount | 16.61 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| R Size(mm) | 0.2 ～ 3 | 0.05 ～ 10 | 0.5 ～ 10 | 0.5 ～ 3 | 0.5 ～ 6 | 0.5 ～ 6 | 1.5 ～ 3 | 0.3 ～ 2 | 0.2 ～ 6 | 0.2 ～ 12.5 | 2 ～ 8 | 0.05 ～ 10 | 0.2 ～ 8 | 0.5 ～ 12.5 | 0.5 ～ 5 | 1 ～ 6 | 1 ～ 10 | 1.5 ～ 6 | 0.2 ～ 10 | 0.15 ～ 5 | 0.5 ～ 3 | 0.05 ～ 3 | 0.5 ～ 3 | 1 ～ 3 | 1 ～ 5 | 0.3 ～ 3 | 1 ～ 5 | 0.5 ～ 6 | 0.5 ～ 6 | 0.2 ～ 2 | 1 ～ 6 | 1 ～ 6 | 0.5 ～ 6 | 0.05 ～ 3 | 0.3 ～ 1 | 0.1 ～ 10 | 0.2 ～ 8 | 0.05 ～ 3 | 0.2 ～ 8 |
| Type | Long-Neck Ball | Ball | Ball | Tapered neck ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball / Spherical Ball | Ball | Ball | Ball | Ball | Tapered neck ball | Tapered neck ball | Long-Neck Ball | Long-Neck Ball | Long-Neck Ball | Ball | Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball | Ball | Ball | Long-Neck Ball | Ball |
| work material | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] |
| Blade length (ℓ)(mm) | 0.6 ～ 7.5 | 0.2 ～ 38 | 2 ～ 25 | 0.8 ～ 4.8 | 1.5 ～ 18 | 3 ～ 55 | 4.5 ～ 9 | 0.6 ～ 4 | 0.4 ～ 12 | 0.8 ～ 50 | 8 ～ 30 | 0.2 ～ 25 | 1.5 ～ 30 | 2 ～ 30 | - | 5 ～ 22 | 3 ～ 25 | 5 ～ 22 | 0.8 ～ 25 | 0.3 ～ 8 | 0.8 ～ 6 | 0.07 ～ 8 | 0.8 ～ 4.8 | 1.6 ～ 6 | 1 ～ 5 | 0.6 ～ 6 | 3 ～ 15 | 1.5 ～ 18 | 1.5 ～ 18 | 0.4 ～ 4 | 4 ～ 24 | 10 ～ 55 | 1.5 ～ 18 | 0.07 ～ 6 | 0.5 ～ 1.2 | 0.4 ～ 25 | 1.5 ～ 30 | 0.07 ～ 6 | 1.5 ～ 48 |
| Number of flutes(sheet) | 2 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 4 | 2 | 2 | 3 | 2 | 2 ～ 3 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Coating | Dia Coat | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | Dia Coat | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | CrN | CrN | Dia Coat | Non-Coated | Non-Coated | For General Steels (AlCrN, etc.) | Non-Coated | MRC | MRC | MRC | For General Steels (AlCrN, etc.) |
| Overall Length (L)(mm) | 50 ～ 110 | 40 ～ 160 | 50 ～ 150 | 70 ～ 110 | 50 ～ 110 | 50 ～ 200 | 60 ～ 90 | 40 | 40 ～ 65 | 40 ～ 180 | 100 ～ 250 | 40 ～ 150 | 50 ～ 140 | 70 ～ 280 | 70 ～ 90 | 50 ～ 110 | 50 ～ 150 | 60 ～ 110 | 40 ～ 150 | 50 ～ 110 | 50 ～ 110 | 40 ～ 110 | 50 ～ 110 | 50 ～ 70 | 50 ～ 90 | 40 | 50 ～ 100 | 50 ～ 110 | 50 ～ 120 | 50 ～ 110 | 50 ～ 80 | 100 ～ 200 | 50 ～ 120 | 50 ～ 110 | 50 | 50 ～ 150 | 50 ～ 140 | 50 ～ 110 | 50 ～ 140 |
| Underneck length (ℓ1)(mm) | 2 ～ 60 | - | 15 ～ 75 | 20 ～ 50 | 14 ～ 68 | 20 ～ 65 | - | - | - | - | - | 15 ～ 75 | 17 ～ 80 | 15 ～ 80 | 4 ～ 55 | 17 ～ 72 | 15 ～ 75 | 17 ～ 72 | - | 1.5 ～ 60 | 7 ～ 60 | 0.2 ～ 60 | 3 ～ 50 | 4 ～ 30 | 5 ～ 10 | - | - | 14 ～ 68 | - | 2 ～ 40 | - | 20 ～ 65 | - | 0.2 ～ 60 | 1.5 ～ 5 | - | - | 0.2 ～ 60 | - |
| Shank diameter (d)(mm) | 4 ～ 6 | 3 ～ 20 | 6 ～ 20 | 4 ～ 8 | 4 ～ 12 | 4 ～ 12 | 6 | 6 | 4 ～ 12 | 3 ～ 25 | 4 ～ 16 | 3 ～ 20 | 4 ～ 16 | 3 ～ 25 | 6 ～ 10 | 6 ～ 12 | 6 ～ 20 | 6 ～ 12 | 3 ～ 20 | 4 ～ 12 | 4 ～ 8 | 3 ～ 8 | 4 ～ 6 | 4 ～ 6 | 6 ～ 10 | 6 | 6 ～ 10 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 6 | 4 | 4 ～ 20 | 4 ～ 16 | 4 ～ 6 | 4 ～ 16 |
| R Precision(μm) | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | ±0.01 | -0.005 ~ +0.001 ～ ±0.003 | ±0.003 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | -0.007 ~ +0.003 ～ ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | -0.007 ~ +0.003 ～ ±0.005 | ±0.01 | -0.005 ~ +0.001 ～ ±0.003 | ±0.01 | ±0.01 | ±0.01 | ±0.005 | ±0.01 | ±0.01 | ±0.01 | -0.007 ~ +0.003 ～ ±0.005 | ±0.005 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 | -0.007 ~ +0.003 ～ ±0.01 |
| Machining Application | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface | Curved surface |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- R7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- R8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- R9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- R10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22.0
- 22.5
- 23.0
- 24.0
- 25
-
Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.45
- 0.48
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.42
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.85
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.81
- 3.85
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.7
- 4.75
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.874
- 7
- 7.1
- 7.2
- 7.4
- 7.5
- 7.874
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.8
- 10
- 10.5
- 10.8
-
11～11.5
- 11
- 11.2
- 11.278
- 11.28
- 11.3
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.199
- 14.2
- 14.4
- 14.5
-
15
-
16～16.993
- 16
- 16.5
- 16.99
- 16.993
-
17～17.9
- 17
- 17.9
-
18
-
19
-
20
-
22～22.682
- 22
- 22.3
- 22.68
- 22.682
-
23
-
24
-
25
-
26～26.9
- 26
- 26.9
-
28～28.6
- 28
- 28.296
- 28.3
- 28.6
-
29
-
30
-
31.6
-
32
-
33
-
34
-
35
-
36～36.5
- 36
- 36.5
-
38
-
40
-
44.6
-
45～45.49
- 45
- 45.49
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
[5-30/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Coating
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
R Precision(μm)
-
Machining Application
Narrow search by specifying Brand
-
- MISUMI (39)
- OSG (52)
- NS TOOL (37)
- DIJET (14)
- UNION TOOL (13)
- SANDVIK (12)
- EIKOSHA (9)
- KYOWA SEIKO (9)
- OKAZAKI SEIKO (6)
- NACHI(FUJIKOSHI) (5)
- 7 LEADERS (4)
- ATOM (3)
- THE CUT (3)
- ASAHI TOOLS (2)
- SPEED TIGER (1)
- SANKO MFG (1)
- WIDIN (1)
- VAN_HOORN (0)
- GUHRING (0)
- TOYO DRILL (0)
- TUNGALOY (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Ball End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.