MISUMI Carbide Radius End Mills（Machining Application：Groove）
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
MISUMI
Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
Starting from∗ ： 109.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Radius End Mill
MISUMI
[Features]
-Cutting edge radius also reinforced cutting edge rigid
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can handle heat treated steel up to 50HRC
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 49.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 122.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
MISUMI
[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 93.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
MISUMI
3-flute 45° helix radius that's resistant to chattering is available at an affordable price- Volume Discount
- XAL
- General Steel
- 3 Flutes
Starting from∗ ： 23.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL series carbide radius end mill, 2-flute / short model
MISUMI
Radius end mills are available at low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Starting from∗ ： 14.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible
-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-use for engraving, side face, rough and medium grinding.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 87.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining
-Multi-faceted type that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- S (Short)
Starting from∗ ： 83.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 76.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
MISUMI
[Features]
-Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
MISUMI
[Features]
-The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling
-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
MISUMI
[Features]
-Radius multi-function cutter
-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Radius flute is also effective in suppressing chips.- Volume Discount
- TS
- General Steel
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute stub model
MISUMI
[Features]
-Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder
-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Starting from∗ ： 34.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- B (Stub)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute / short model
MISUMI
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 2-flute / regular model
MISUMI
[Features]
General 2-flute cutter with regular flute length and flute radius
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
TSC series carbide long neck radius end mill, 2-flute, long neck model
MISUMI
Long neck radius that can be used as a ball and allows a large pick feed- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
MISUMI
[Features]
-Multi-functional long neck radius with high feed rate and excellent durability
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 3 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide long neck radius end mill, 4-flute / long neck model
MISUMI
[Features]
-Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities
-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
Starting from∗ ： 43.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
MISUMI
[Features]
-Suppresses chattering with a short flute length and a tapered shape at the peripheral edge
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 2 Flutes
Min. Shipping Days ： 5 Days -
TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
MISUMI
By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
- B (Stub)
Starting from∗ ： 87.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide radius end mill, 3-flute, 45° spiral / short model
MISUMI
The popular radius type for stainless steel processing is also effective in preventing chipping- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Starting from∗ ： 93.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
In addition to the standard products, the radius can be selected extensively for manufactured products- Volume Discount
- DLC
- Aluminum
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness- Volume Discount
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
MISUMI
Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
MISUMI
Radius type that's also effective in preventing cutter marks- Volume Discount
- Non-Coated
- Aluminum
- 3 Flutes
- R (Regular)
Min. Shipping Days ： 5 Days -
Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
MISUMI
Small radius type that prevents cutter marks on resin- Volume Discount
- Non-Coated
- Resin
- 2 Flutes
- R (Regular)
Starting from∗ ： 44.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
MISUMI
[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-The long neck type is ideal for milling deep pockets, etc.
-Multi-use for engraving, side faces, R, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- High-Hardness Steel
- 3 Flutes
Starting from∗ ： 90.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
MISUMI
[Features]
-Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments
-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.- Non-Coated
- General Steel
Min. Shipping Days ： 7 Days -
XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° radius end mill capable of high-speed and high-efficiency machining- Volume Discount
Starting from∗ ： 75.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
MISUMI
Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)- Volume Discount
Starting from∗ ： 47.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
MISUMI
[Features]
-Suppresses chatter in uneven pitch and uneven flutes
-Stable machining is possible while maintaining finished surface accuracy
-Cutting edge radius also enhances cutting edge rigidity
-Can machine heat treated steel up to 50HRC
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 49.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Long Neck Radius End Mill
MISUMI
[Features]
-Effective for deep cutting due to long neck
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can handle heat treated steel up to 50HRC
-Cutting edge radius also reinforced cutting edge stiff
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 38.08 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
MISUMI
[Features]
-Effective for deep cutting due to long neck type
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can process heat treated steel up to 50HRC
-Cutting edge radius also reinforced cutting edge rigid
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Starting from∗ ： 40.28 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Blade diameter (D)(φ) |
| R Size(mm) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Overall Length (L)(mm) |
| Shank diameter (d)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Coating |
| Torsion Angle (θ) |
| R Precision(μm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model | XAL series carbide radius end mill, 3-flute, 45° torsion / regular model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model | TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / stub model | TSC series carbide radius end mill, 3-flute, 45° spiral / short model | TSC series carbide radius end mill, 3-flute, 45° spiral / regular model | TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model | TSC series carbide long neck radius end mill, 2-flute, long neck model | TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model | TSC series carbide long neck radius end mill, 4-flute / long neck model | TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model | TSC series carbide radius end mill, 3-flute, 45° spiral / short model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model | Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model | Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model | TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model | Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill | VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill | |||||||||||
| Starting from∗ | 109.63 € *Unit price with basic configuration Volume Discount | 49.28 € *Unit price with basic configuration Volume Discount | 122.52 € *Unit price with basic configuration Volume Discount | 93.37 € *Unit price with basic configuration Volume Discount | 23.73 € *Unit price with basic configuration Volume Discount | 14.52 € *Unit price with basic configuration Volume Discount | 87.94 € *Unit price with basic configuration Volume Discount | 83.28 € *Unit price with basic configuration Volume Discount | 76.51 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 34.89 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 43.09 € *Unit price with basic configuration Volume Discount | - Volume Discount | 87.20 € *Unit price with basic configuration Volume Discount | 93.25 € *Unit price with basic configuration Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 44.46 € *Unit price with basic configuration Volume Discount | 90.46 € *Unit price with basic configuration Volume Discount | - | 75.31 € *Unit price with basic configuration Volume Discount | 47.37 € *Unit price with basic configuration Volume Discount | 49.28 € *Unit price with basic configuration Volume Discount | 38.08 € *Unit price with basic configuration Volume Discount | 40.28 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Blade diameter (D)(φ) | 5 ～ 22 | 1 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 12 | 1 ～ 12 | 2 ～ 12 | 2 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 20 | 2 ～ 12 | 1 ～ 12 | 1 ～ 20 | 1 ～ 20 | 0.2 ～ 6 | 1 ～ 4 | 1 ～ 6 | 0.2 ～ 3 | 3 ～ 12 | 3 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 2 ～ 12 | 1 ～ 10 | 4 ～ 12 | 2 ～ 20 | 4 ～ 12 | 2 ～ 25 | 1.5 ～ 12 | 0.4 ～ 12 | 1 ～ 12 |
| R Size(mm) | 0.5 ～ 2 | 0.1 ～ 3 | 0.813 ～ 2.438 | 0.813 ～ 2.438 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 2 | 0.5 ～ 2 | 0.3 ～ 1 | 0.5 ～ 1 | 0.3 ～ 2 | 0.2 ～ 2 | 0.2 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.1 ～ 3 | 0.05 ～ 1 | 0.2 ～ 1 | 0.05 ～ 1 | 0.05 ～ 0.5 | 0.8 ～ 2 | 0.5 ～ 2 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 ～ 1 | 0.2 | 1 ～ 2 | 0.1 ～ 3 | 0.2 ～ 1 | 0.2 ～ 6.5 | 0.2 ～ 3 | 0.1 ～ 1 | 0.2 ～ 1 |
| work material | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Blade length (ℓ)(mm) | 9 ～ 33 | 2.5 ～ 30 | 8 ～ 24 | 8 ～ 24 | 16 ～ 38 | 3 ～ 30 | 2 ～ 12 | 4 ～ 24 | 4.5 ～ 18 | 4.5 ～ 18 | 5 ～ 26 | 5 ～ 56 | 3 ～ 18 | 1.5 ～ 18 | 2 ～ 40 | 3 ～ 60 | 0.16 ～ 12 | 0.8 ～ 3.2 | 1.5 ～ 9 | 0.16 ～ 6 | 4.5 ～ 18 | 7 ～ 18 | 5 ～ 36 | 5 ～ 36 | 5 ～ 36 | 5 ～ 36 | 3 ～ 30 | 8 ～ 24 | 4 ～ 60 | 18 ～ 38 | 4 ～ 50 | 4 ～ 30 | 0.6 ～ 18 | 1.5 ～ 30 |
| Number of flutes(sheet) | 3 | 2 | 3 | 3 | 3 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 4 | 2 | 3 | 3 | 2 | 3 | 2 | 3 | 2 | 3 | 2 | 4 | 4 | 4 | - | 4 |
| Type | Radius | Radius | High-Feed Radius | High-Feed Radius | Radius | Radius | High-Feed Radius | High-Feed Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Long-Neck Radius | Long-Neck Radius | Tapered neck radius | Tapered neck radius | Radius | Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Radius | Radius | Radius | Radius | Long-Neck Radius | Long-Neck Radius |
| Overall Length (L)(mm) | 80 ～ 200 | 50 ～ 130 | 50 ～ 100 | 80 ～ 160 | 60 ～ 100 | 50 ～ 75 | 50 ～ 100 | 50 ～ 100 | 40 ～ 65 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 35 ～ 60 | 40 ～ 75 | 40 ～ 110 | 45 ～ 125 | 40 ～ 100 | 45 ～ 70 | 50 ～ 100 | 40 ～ 100 | 80 ～ 160 | 60 ～ 100 | 40 ～ 80 | 40 ～ 80 | 40 ～ 80 | 40 ～ 80 | 50 ～ 80 | 70 ～ 140 | 40 ～ 125 | 60 ～ 100 | 50 ～ 120 | 50 ～ 150 | 40 ～ 100 | 50 ～ 110 |
| Shank diameter (d)(mm) | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 20 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 16 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 3 ～ 10 | 4 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 25 | 6 ～ 12 | 4 ～ 12 | 4 ～ 12 |
| Underneck length (ℓ1)(mm) | - | - | - | 35 ～ 108 | - | - | - | - | - | 14 ～ 68 | 18 ～ 70 | 26 ～ 92 | - | 14 ～ 45 | 17 ～ 45 | 23 ～ 55 | 1 ～ 40 | 6 ～ 30 | 3 ～ 40 | 1 ～ 60 | 24 ～ 105 | - | 23 ～ 50 | 23 ～ 50 | 23 ～ 50 | 23 ～ 50 | - | - | - | - | - | - | 2 ～ 50 | 4 ～ 50 |
| Machining Application | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove | Groove |
| Coating | Non-Coated | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | DLC | DLC | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) / Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | - | - | - |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | - | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Other | - | - | - |
| R Precision(μm) | ±0.02 | - | - | - | ±0.02 | ±0.02 | ±0.015 | ±0.015 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.005 ～ ±0.01 | ±0.005 ～ ±0.01 | ±0.005 | ±0.005 ～ ±0.01 | ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.01 ～ ±0.02 | ±0.01 ～ ±0.02 | ±0.02 | ±0.015 | ±0.02 | ±20 | ±0.02 | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Blade diameter (D)(φ)
-
R Size(mm)
-
work material
-
Blade length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 37.5
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 80
- 100
[5-56/1mm Unit(s)]
-
Number of flutes(sheet)
-
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
-
Overall Length (L)(mm)
-
Shank diameter (d)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Coating
-
Torsion Angle (θ)
-
R Precision(μm)
Narrow search by specifying Brand
-
- MISUMI (34)
- OSG (19)
- KYOWA SEIKO (12)
- NS TOOL (8)
- UNION TOOL (7)
- OKAZAKI SEIKO (4)
- DIJET (3)
- NACHI(FUJIKOSHI) (1)
- SPEED TIGER (1)
- SANDVIK (1)
- WATERMILLS (1)
- ATOM (0)
- VAN_HOORN (0)
- TAIYO-TOOL (0)
- 7 LEADERS (0)
- GUHRING (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Carbide Radius End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.