Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

OSG Screw-Hole-Related Tools（Screw size (Nominal)：M6）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Promotional pricing

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Starting from^∗ ：	16.54 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, General Purpose EX-SFT

OSG

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Volume Discount

Stock

Starting from^∗ ：	9.19 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless EX-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Starting from^∗ ：	9.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Starting from^∗ ：	8.64 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S

OSG

Volume Discount

Starting from^∗ ：	32.18 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Starting from^∗ ：	102.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Starting from^∗ ：	102.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Starting from^∗ ：	19.22 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Starting from^∗ ：	21.93 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Volume Discount

Starting from^∗ ：	14.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Super Hard Hand Tap, OTT

OSG

Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

Starting from^∗ ：	73.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Starting from^∗ ：	10.85 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Starting from^∗ ：	16.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series, Spiral Tap, Long Shank A-LT-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Starting from^∗ ：	25.10 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

OSG

Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.

Volume Discount

Starting from^∗ ：	18.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT

OSG

Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

Volume Discount

Starting from^∗ ：	13.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

OSG

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Starting from^∗ ：	12.99 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Starting from^∗ ：	27.57 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT

OSG

Suitable for massive tapping of aluminum alloy castings by high precision automatic machine

Starting from^∗ ：	80.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Starting from^∗ ：	9.73 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series X Performer Long Shank LT-S-XPF

OSG

Volume Discount

Starting from^∗ ：	28.84 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-H

OSG

Volume Discount

Starting from^∗ ：	69.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Starting from^∗ ：	24.25 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

OSG

Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3

Volume Discount

Starting from^∗ ：	98.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Starting from^∗ ：	16.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Starting from^∗ ：	23.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Starting from^∗ ：	18.26 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Starting from^∗ ：	18.02 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Spiral Tap Series, Short Chamfer Type, EX-SC-SFT

OSG

Bite length is 1.5 threads per inch. For Blind Holes Where it Can't Secure an Effective Screw Length With a Standard Spiral Tap with 2.5 Threads Per Inch

Volume Discount

Starting from^∗ ：	9.29 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

OSG

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Volume Discount

Starting from^∗ ：	14.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Low Spiral LW-SFT

OSG

Debris is chopped into fine pieces and expelled backward thanks to the grooves with a weak twist, allowing for stable tapping. Also has good chipping resistance qualities.

Volume Discount

Starting from^∗ ：	9.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Carbide Spiral Tap OT-SFT

OSG

Suitable for massive tapping of blind hole of aluminum alloy/magnesium alloy/copper alloy/thermoplastic plastic by high precision automatic machine

Starting from^∗ ：	86.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Tin Coated, TIN-HT

OSG

Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.

Volume Discount

Starting from^∗ ：	16.64 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

OSG

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Starting from^∗ ：	12.05 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Starting from^∗ ：	324.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Starting from^∗ ：	22.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coating, Long Shank, V-LT-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Starting from^∗ ：	23.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT

OSG

Can conduct high speed / high precision thread cutting of aluminum and aluminum alloys when used exclusively with tools equipped with complete lead feeding machinery.

Volume Discount

Starting from^∗ ：	12.81 €
	Special price
Min. Shipping Days ：	15 Days

*Unit price with basic configuration

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

OSG

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Volume Discount

Starting from^∗ ：	14.35 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Starting from^∗ ：	8.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Starting from^∗ ：	14.02 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Starting from^∗ ：	34.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Starting from^∗ ：	25.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Specifications
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Promotional pricing	Promotional pricing		Promotional pricing	Promotional pricing				Promotional pricing	Promotional pricing			Promotional pricing					Promotional pricing			Promotional pricing									Promotional pricing					Promotional pricing					Promotional pricing			Promotional pricing
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	A Tap Series, Spiral Tap, A-SFT	Spiral Tap Series, General Purpose EX-SFT	Spiral Tap Series, for Stainless EX-SUS-SFT	Point Tap Series, for General, EX-POT	Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT	Point Tap Series, Tin Coated, TIN-POT	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series X Performer S-XPF	Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT	Hand Tap Series, Super Hard Hand Tap, OTT	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	A Tap Series for Pipes Point Tap A-POT	A Tap Series, Spiral Tap, Long Shank A-LT-SFT	Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT	Spiral Tap Series, High-Speed Synchronized Tap for Aluminum, HS-AL-SFT	Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	Hand Tap Series, Hand Taps for Super Hard Diecast, OT-DC-HT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Groove-Free Tap Series X Performer Long Shank LT-S-XPF	Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-H	A Tap Series Point Tap Long Shank A-LT-POT	Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Spiral Tap Series, V Coated, V-SFT	Spiral Tap Series, Short Chamfer Type, EX-SC-SFT	Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT	Spiral Tap Series, Low Spiral LW-SFT	Spiral Tap Series, Carbide Spiral Tap OT-SFT	Hand Tap Series, Tin Coated, TIN-HT	Hand Tap Series, for Difficult-to-Machine Material, CPM-HT	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series, V Coating, Long Shank, V-LT-POT	Point Tap Series, Ultra Synchronizing Taps for Aluminum, HS-AL-RFT	Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Point Tap Series, Ultra Synchronizing Taps, HS-RFT	Point Tap Series, High Speed Synchronizing Taps, JIS Shank, J-HS-RFT
Starting from^∗	16.54 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.19 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	9.42 € *Unit price with basic configuration Volume Discount	8.64 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	32.18 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	102.71 € *Unit price with basic configuration	102.92 € *Unit price with basic configuration	16.24 € *Unit price with basic configuration Volume Discount	19.22 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	21.93 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.47 € *Unit price with basic configuration Volume Discount	73.27 € *Unit price with basic configuration	10.85 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	16.24 € *Unit price with basic configuration Volume Discount	25.10 € *Unit price with basic configuration	18.16 € *Unit price with basic configuration Volume Discount	13.15 € *Unit price with basic configuration Volume Discount	12.99 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	27.57 € *Unit price with basic configuration Volume Discount	80.47 € *Unit price with basic configuration	9.73 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	28.84 € *Unit price with basic configuration Volume Discount	69.82 € *Unit price with basic configuration Volume Discount	24.25 € *Unit price with basic configuration	98.36 € *Unit price with basic configuration Volume Discount	16.54 € *Unit price with basic configuration Volume Discount	23.77 € *Unit price with basic configuration Volume Discount	18.26 € *Unit price with basic configuration	18.02 € *Unit price with basic configuration Volume Discount	9.29 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.52 € *Unit price with basic configuration Volume Discount	9.50 € *Unit price with basic configuration Volume Discount	86.52 € *Unit price with basic configuration	16.64 € *Unit price with basic configuration Volume Discount	12.05 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	295.75 € *Unit price with basic configuration	324.46 € *Unit price with basic configuration	22.83 € *Unit price with basic configuration Volume Discount	23.17 € *Unit price with basic configuration	12.81 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.35 € *Unit price with basic configuration Volume Discount	8.63 € *Unit price with basic configuration Volume Discount	14.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	34.90 € *Unit price with basic configuration Volume Discount	25.23 € *Unit price with basic configuration Volume Discount
Min. Shipping Days ：	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	8 Days	6 Days	6 Days	6 Days	6 Days	6 Days	15 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications		Stock
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6	M6
Pitch (P), Number of Threading(mm)	0.5 ～ 1	0.5 ～ 1	1	0.5 ～ 1	0.5 ～ 1	1	1	1	1	1	0.75 ～ 1	1	1	0.5 ～ 1	0.75 ～ 1	1	1	1	1	1	1	1	0.5 ～ 1	0.75 ～ 1	1	0.75 ～ 1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	1	0.75 ～ 1	1	1
Chamfer threads (Lcf)	1.5P ～ 2.5P	2.5P	2.5P	5P	-	3P	1.5P ～ 3P	5P	2P ～ 4P	2P ～ 4P	2.5P	1.5P ～ 3P	5P	5P	2.5P	2.5P	3P	3P	2.5P ～ 5P	1.5P	4P	-	-	5P	2.5P ～ 5P	2.5P	2.5P	2.5P	2.5P	1.5P	2.5P	2.5P	1.5P ～ 2.5P	1.5P ～ 5P	2P ～ 5P	-	-	5P	5P	6P	4P	5P	5P	6P	5P
Tool Material Type	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Alloy HSS	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	High Hardness Steel (50-60 HRC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎]	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Cast Iron (FC)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Spiral Tap	Spiral Tap	Spiral Tap	Point tap	Die	Hand Tap	Hand Tap	Point tap	Roll tap	Roll tap	Spiral Tap	Hand Tap	Point tap	Point tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Hand Tap	Point tap	Roll tap	Die	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Hand Tap	Thread cutter	Thread cutter	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For blind hole	For blind hole	For blind hole	For through hole	-	For through hole / For blind hole	For through hole / For blind hole	For through hole	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole	For through hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	-	For through hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole
Coating Y/N	Available	N/A	N/A	N/A	N/A	Available	N/A	Available	Available	Available	N/A	N/A	N/A	Available	Available	Available	N/A	N/A	Available	N/A	N/A	Available	N/A	Available	Available	Available	Available	Available	Available	N/A	N/A	N/A	N/A	Available	N/A	Available	Available	Available	Available	N/A	N/A	N/A	N/A	Available	Available
Coating Type	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	TiN	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Other	Other	TiN	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	Other	Non-Coated	Other	TiCN	TiN	TiN	TiCN	Other	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	TiAlN	TiAlN	TiN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	TiN
Overall Length (L)(mm)	62	62	62	62	-	62	100	62	62	62	100 ～ 200	62	62	62	100 ～ 200	62	62	62	62	62	62	100 ～ 150	-	100 ～ 200	62	62	100 ～ 150	62	62	62	100 ～ 150	62	62	62	62	62	62	100 ～ 150	100	62	100 ～ 150	62	100 ～ 200	62	62

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-22

CTG-16

No0UN

NO.0-80UNF

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

NO.12-28UNF

NO.12-24UNC

S0.2

NO.2-64UNF

NO.2-56UNC

No.2-56UNC

S0.3

NO.3-56UNF

NO.3-48UNC

S0.4

NO.4-48UNF

NO.4-40UNC

No.4-40UNC

S0.5

NO.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-32UNC

S0.7

S0.8

NO.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-11

1′-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1′1/2-11

1 1/2-8UN

1"1/4UN

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.6

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

M3 - M18

SM3/32

M3.5

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

EGM 5

M5

M5.0

MF5

No5UN

UNC 5

№5-40UNC

5/8UN

G5/8

G 5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

M5.5

EGM 6

M6

M6.0

MF6

No6UN

UNC 6

UNF 6

UNJC 6

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8UN

G7/8

G 7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

7/16-20UNF

7/16-14UNC

SM7/32

EGM 8

M8

MF8

No8UN

UNC 8

UNF 8

UNJC 8

№8-32UNC

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

EGM 10

M10

MF10

No10UN

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M21

M22

MF22

M23

M24

MF24

M25

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

M27

MF27

M28

MF28

M30

MF30

M32

Mf32

M33

M34

M35

M36

M37

M38

M39

M40

M42

M45

M48

M52

M56
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

8P

9 P

9P

23P

24P

25P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

42

44

44.5

45

46

47.62

47.625

48

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99.21

100

101

102

104

105

108

109

109.65

110

111

112

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

250

270

300

310

460
Drawing

Clear

Narrow search by specifying Brand

- MISUMI (16)
- Cost Efficient Products ()
- OSG (58)
- YAMAWA MFG (20)
- REX TOOLS (10)
- SANDVIK (8)
- CARMEX (4)
- TANOI MFG (4)
- GUHRING (3)
- GEDORE (2)
- EIKOSHA (2)
- TRUSCO NAKAYAMA (2)
- WERA (2)
- ISHIHASHI (1)
- NACHI(FUJIKOSHI) (1)
- RUKO (1)
- FEIN (1)
- NS TOOL (0)
- BERNSTEIN AG (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- SKC (0)
- HAZET (0)
- WIHA (0)
- RENNSTEIG (0)
- ESCO (0)
- NOGAJAPAN (0)
Clear