OSG Thread Cutters
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, Metric & Metric Fine
OSG
Carbide thread milling cutter with 3 crest thread lenght - For all materials and hardened steels up to 50 HRCStarting from∗ ： 156.30 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC
OSG
The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin- Volume Discount
Starting from∗ ： 101.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series MC-Planet Cutters PNGT
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.Starting from∗ ： 205.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series NC-Planet Cutters WX-PNC
OSG
Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.- Volume Discount
Starting from∗ ： 158.30 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet DR-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC
OSG
A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving ProductivityStarting from∗ ： 324.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
OSG
By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.Starting from∗ ： 165.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 176.00 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, G
OSG
Carbide thread milling cutter with 3 crest thread lenght - For all materials and hardened steels up to 50 HRCStarting from∗ ： 247.40 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, Metric & Metric Fine | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC | WX-ST-PNC-3P, Carbide thread milling cutter with 3 crest thread length, G | |||||
| Starting from∗ | 156.30 € *Unit price with basic configuration | 101.50 € *Unit price with basic configuration Volume Discount | 205.83 € *Unit price with basic configuration | 158.30 € *Unit price with basic configuration Volume Discount | 295.75 € *Unit price with basic configuration | 324.46 € *Unit price with basic configuration | 165.90 € *Unit price with basic configuration | 176.00 € *Unit price with basic configuration | 247.40 € *Unit price with basic configuration |
| Min. Shipping Days ： | 2 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 2 Days | 2 Days |
| Screw Types | - | Meter / Unified | Meter / Taper for Pipe / Parallel for Pipes | Meter / Unified / Taper for Pipe | Meter | Meter | Meter | - | - |
| Screw size (Nominal) | - | - | - | - | M6 ～ M12 | M6 ～ M12 | - | - | - |
| Pitch (P), Number of Threading(mm) | - | 0.25 ～ 32 | 1 ～ 19 | 1 ～ 28 | 1 ～ 1.75 | 1 ～ 1.75 | 0.5 ～ 3 | - | - |
| Tool Material Type | - | Carbide | Cobalt HSS | Carbide | Carbide | Carbide | Carbide | - | - |
| work material | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | - | - |
| Tap Type | - | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Thread cutter | - | - |
| Hole type | - | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | - | - |
| Coating Y/N | - | Available | Available | Available | Available | Available | Available | - | - |
| Coating Type | - | For High Hardness (Silicon Group) / Other | TiN | TiAlN | TiAlN | TiAlN | TiAlN | - | - |
| Overall Length (L)(mm) | - | 40 | 80 ～ 210 | 60 ～ 120 | 62 ～ 89 | 62 ～ 89 | 60 ～ 120 | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Screw Types
- Meter
- Unified
- Whitworth
- Taper for Pipe
- Parallel for Pipes
- Other
-
Screw size (Nominal)
- NO.0-80UNF
- S0.1
- NO.1-72UNF
- NO.1-64UNC
- NO.10-32UNF
- NO.10-24UNC
- NO.12-28UNF
- NO.12-24UNC
- S0.2
- NO.2-64UNF
- NO.2-56UNC
- S0.3
- NO.3-56UNF
- NO.3-48UNC
- S0.4
- NO.4-48UNF
- NO.4-40UNC
- S0.5
- NO.5-44UNF
- NO.5-40UNC
- S0.6
- NO.6-40UNF
- S0.8
- NO.8-36UNF
- NO.8-32UNC
- M1
- S1
- UNC 1
- G1"-3"
- G1/2 5/8
- G1/4
- UNC 1/4
- UNF 1/4
- 1/4-28UNF
- 1/4-20UNC
- G1/8
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M2
- UNC 2
- M2.2
- M2.5
- M3
- G3/8
- M3 - M10
- M3 - M12
- M3.5
- M4
- UNC 4
- M5
- G5/8 3/4
- M5 - M12
- UNC 5/16
- UNF 5/16
- M6
- MF6
- UNC 6
- UNF 6
- 7 execution M3 - M12
- M8
- MF8
- UNC 8
- M10
- MF10
- UNC 10
- UNF 10
- M12
- MF12
- Mf12
- M12 x 1.5
- M14
- MF14
- M16
- MF16
- Mf16
- M16 x 1.5
- M18
- M20
- MF20
- Mf20
- M22
- M24
- MF24
- Mf25
- M25 x 1.5
- M27
- MF28
- Mf32
-
Pitch (P), Number of Threading(mm)
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Brand
-
- MISUMI (5)
- CARMEX (35)
- REX TOOLS (20)
- OSG (9)
- WERA (5)
- GEDORE (3)
- HAZET (3)
- GUHRING (2)
- NS TOOL (2)
- SANDVIK (2)
- FEIN (2)
- BERNSTEIN AG (1)
- RUKO (1)
- STAHLWILLE (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Thread Cutters
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.