OSG Chamfer, V-Grooves（Tool Material Type：Carbide）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 33.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LS-LDS
OSG
90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.Starting from∗ ： 295.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Leading Drills, FX-LDS
OSG
90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.Starting from∗ ： 357.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Starting from∗ ： 88.29 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC
OSG
By adopting of sharp high helix, clean working surface with less burr can be obtained.- Volume Discount
Starting from∗ ： 81.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.Starting from∗ ： 84.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC
OSG
Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.- Volume Discount
Starting from∗ ： 87.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Negative Type) HSCT-N
OSG
End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 73.17 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute, Chamfering Cutter (Positive Type) HSCT-P
OSG
End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 73.51 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.- Volume Discount
Starting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.- Volume Discount
Starting from∗ ： 78.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Positive Type Regular W-HSCT-P
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 79.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N
OSG
[Features]
· A unique 3-flute specification which helps prevent cracking during machining and which enables high-efficiency and high-feed machining.
The 40° torsion and wide tip pockets enable both excellent cutting performance and high level surface finishing.
Significantly reduces turning-back, or burring.
Excellent chip discharge.Starting from∗ ： 84.46 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | WXL-Coated Chamfering Cutter Positive Type Long Shank WLS-HSCT-P | 2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC | 2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC | 3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P | WXL-Coated Chamfering Cutter Negative Type Long Shank WLS-HSCT-N | |||||||||
| Starting from∗ | 84.46 € *Unit price with basic configuration | 33.77 € *Unit price with basic configuration | 295.75 € *Unit price with basic configuration | 357.80 € *Unit price with basic configuration | 88.29 € *Unit price with basic configuration Volume Discount | 81.19 € *Unit price with basic configuration Volume Discount | 84.50 € *Unit price with basic configuration | 87.63 € *Unit price with basic configuration Volume Discount | 73.17 € *Unit price with basic configuration Volume Discount | 73.51 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 78.36 € *Unit price with basic configuration Volume Discount | 79.82 € *Unit price with basic configuration | 79.82 € *Unit price with basic configuration | 84.46 € *Unit price with basic configuration |
| Min. Shipping Days ： | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days |
| Application | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove | Chamfering/Horizontal | - | - |
| Tip angle (θ) | - | - | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90 | 90° | - | - |
| Tool Diameter (D)(mm) | - | 4 ～ 12 | 16 ～ 25 | 16 ～ 25 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | - | - | - |
| work material | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | - | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] |
| Single blade, two blades | - | - | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | Single blade | - | - |
| Peripheral Blade Y/N | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - |
| Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
| Coating Y/N | Available | Available | Available | Available | Available | N/A | Available | N/A | N/A | N/A | N/A | N/A | Available | Available | Available |
| Coating Type | Other | - | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Other | Other |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Application
-
Tip angle (θ)
-
Tool Diameter (D)(mm)
- 0 to 2
- 0.1
- 0.2
- 0.3
- 0.3, 0.6
- 0.4
- 0.5
- 0.5, 1
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1, 2
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.17
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.35
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 7.92
- 8
- 8.2
- 8.4
- 8.8
- 9.4
- 9.53
- 10
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 15.88
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 26
- 30
- 31
- 35
- 36
- 40
- 45
- 46
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
work material
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1, 1.5
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2, 3
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Brand
-
- MISUMI (18)
- MAKOTOLOY (22)
- OSG (15)
- IWATA TOOL (9)
- GUHRING (3)
- KYOWA SEIKO (3)
- ASAHI TOOLS (2)
- DIJET (2)
- EIKOSHA (2)
- NS TOOL (2)
- OKAZAKI SEIKO (2)
- SANDVIK (2)
- 7 LEADERS (1)
- SANKO MFG (1)
- THE CUT (1)
- UNION TOOL (1)
- BIG KAISER (0)
- STAR-M (0)
- FUJIGEN (0)
- DAIICHITOOL (0)
- SPEED TIGER (0)
- FUKUDA (0)
- NT TOOL (0)
- NOGAJAPAN (0)
- TAIYO-TOOL (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Chamfer, V-Grooves
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.